C8 eLED (L2) - Lighting Underwater Kinetics - Free user manual and instructions
Find the device manual for free C8 eLED (L2) Underwater Kinetics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Dive Light |
| Model | C8 eLED (L2) |
| Brand | Underwater Kinetics |
| Light Source | Cree XM-L2 LED |
| Brightness | Up to 500 lumens |
| Beam Angle | 15° (narrow spot) |
| Battery Type | Rechargeable Li-ion 18650 (3.7V) |
| Battery Capacity | 2600 mAh |
| Charging | USB magnetic charging cable |
| Runtime | Approx. 2 hours on high |
| Depth Rating | 100 meters |
| Construction | Anodized aluminum body |
| Lens | Tempered glass with anti-reflective coating |
| Switch | Magnetic rotary switch |
| Light Modes | High, Medium, Low, Strobe |
| Dimensions | 152 mm × 41 mm (L × D) |
| Weight | 200 g (without battery) |
| Included Accessories | USB charging cable, spare O-rings, lanyard |
| Maintenance | Rinse with fresh water after use; replace O-rings annually |
| Safety | Do not use in explosive environments; avoid direct eye exposure |
| Warranty | 2 years limited |
Frequently Asked Questions - C8 eLED (L2) Underwater Kinetics
How do I charge the C8 eLED (L2)?
Use the included magnetic USB charging cable. Connect to a 5V USB power source and attach the magnetic end to the charging port on the light. A red indicator shows charging; green when fully charged. Charging time is approximately 3-4 hours.
What is the waterproof depth rating?
The C8 eLED (L2) is rated to 100 meters (330 feet) of water pressure. Ensure the O-rings are clean and lightly greased before each dive to maintain the seal.
How do I change between light modes?
Rotate the magnetic switch clockwise to turn on and cycle through modes: High → Medium → Low → Strobe. Rotate counterclockwise to turn off. The light remembers the last mode used.
Can I replace the battery?
Yes, the battery is user-replaceable. Unscrew the tail cap and remove the rechargeable 18650 Li-ion battery. Use only protected 18650 cells with over-discharge protection.
How do I clean and maintain the light?
After use in salt water, rinse thoroughly with fresh water. Dry all parts. Remove the battery if storing for more than a month. Lubricate O-rings with silicone grease periodically.
What is the beam pattern like?
It produces a narrow spot beam with a 15° angle, ideal for focused illumination underwater. Minimal side spill, good for long-range visibility.
Does the light have a low battery warning?
When the battery is low, the light will automatically step down to a lower mode and eventually shut off to protect the battery. Recharge promptly.
What spare parts are available?
Spare parts include O-ring kits, replacement tail caps, and charging cables. Contact Underwater Kinetics or authorized dealers for purchases.
Is the light safe for use in explosive environments?
No, this light is not rated for hazardous locations. Do not use in areas where flammable gases or dusts may be present.
What is the warranty period?
Underwater Kinetics offers a 2-year limited warranty against defects in materials and workmanship. Retain your purchase receipt for warranty claims.
User questions about C8 eLED (L2) Underwater Kinetics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual C8 eLED (L2) - Underwater Kinetics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. C8 eLED (L2) by Underwater Kinetics.