DS-K3B801BX - Access Control System Hikvision - Free user manual and instructions
Find the device manual for free DS-K3B801BX Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Control Gate (Tripod Turnstile) |
| Model | DS-K3B801BX |
| Dimensions | 1200 mm x 200 mm x 1000 mm (L x W x H) |
| Weight | Approx. 60 kg |
| Power Supply | AC 110-240 V, 50/60 Hz |
| Power Consumption | < 50 W |
| Authentication Methods | Card, PIN, Fingerprint, Face Recognition (optional) |
| Passage Width | 550 mm |
| Passage Rate | Up to 30 persons per minute |
| Security Features | Anti-tailgating, alarm for unauthorized entry, emergency release |
| Material | Stainless steel (body), polycarbonate (arm/door) |
| Operating Temperature | -20°C to 60°C |
| Ingress Protection | IP54 |
| Interface | RS-485, Ethernet (TCP/IP), Wiegand |
| Maintenance | Regular cleaning of sensors and moving parts; firmware updates via network |
| Spare Parts | Motor, control board, arm/door, sensor kit, power supply |
| Repairability | Modular design for easy part replacement; technical support available |
| General Information | Compatible with Hikvision access controllers and third-party systems |
Frequently Asked Questions - DS-K3B801BX Hikvision
How to install the DS-K3B801BX gate?
Installation should be performed by a qualified technician. Ensure a solid concrete foundation, connect power and network cables, and configure the device using the Hikvision iVMS-4200 software. Refer to the user manual for detailed steps.
Can the DS-K3B801BX be used outdoors?
Yes, the DS-K3B801BX has an IP54 rating, making it suitable for outdoor use. However, avoid prolonged exposure to heavy rain or direct sunlight without additional shelter.
What types of credentials are supported?
The gate supports multiple authentication methods including RFID cards (13.56 MHz), PIN codes, and optionally fingerprint or face recognition with additional modules.
How to reset the gate to factory settings?
Press and hold the reset button (usually inside the control unit) for 10 seconds until the LED flashes. Alternatively, use the iVMS-4200 software to perform a factory reset.
What is the maximum passage width?
The standard passage width is 550 mm. For custom widths, contact Hikvision support for possible modifications.
How to troubleshoot if the gate does not open?
Check power supply and network connection. Verify that the authentication device (card reader, etc.) is functioning. Ensure no mechanical obstruction. If issue persists, consult the manual or contact support.
Can it integrate with third-party access control systems?
Yes, the gate supports standard Wiegand and RS-485 protocols, allowing integration with most third-party controllers. Additional configuration may be required.
What maintenance is required?
Regularly clean the sensors and moving parts with a soft dry cloth. Lubricate the pivot joints every 6 months. Check for firmware updates via the manufacturer's website.
Is emergency exit possible?
Yes, the gate is equipped with an emergency release mechanism (push bar or button) that allows free passage in case of power failure or emergency. It complies with safety regulations.
Where can I purchase spare parts?
Spare parts such as motors, control boards, and sensors can be ordered from authorized Hikvision distributors. Use the model number DS-K3B801BX for correct compatibility.
User questions about DS-K3B801BX Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Control System in PDF format for free! Find your manual DS-K3B801BX - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-K3B801BX by Hikvision.