VL2600 Wash - Lighting VARI-LITE - Free user manual and instructions
Find the device manual for free VL2600 Wash VARI-LITE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Moving Head Wash Light |
| Light Source | 950W MSR Discharge Lamp |
| Luminous Output | 50,000 lumens (approx.) |
| Color Mixing | CMY, plus Color Wheel with 9 colors |
| Beam Angle | 10° to 60° (motorized zoom) |
| Control Protocol | DMX512-A, RDM |
| DMX Channels | 18 or 23 (selectable) |
| Pan/Tilt | 540°/270° |
| Dimming | 0-100% linear, electronic |
| Strobe | 1-25 Hz |
| Power Consumption | 1200W max |
| Power Supply | 100-240V AC, 50/60Hz |
| Dimensions (L x W x H) | 600 x 450 x 300 mm |
| Weight | 32 kg |
| IP Rating | IP20 (indoor use) |
| Safety Certifications | CE, ETL |
| Maintenance | Clean lens and vents monthly; replace lamp after 750 hours |
| Spare Parts Available | Lamp, power supply, gobo modules, mainboard |
| Repair Service | Authorized service centers; field-replaceable modules |
Frequently Asked Questions - VL2600 Wash VARI-LITE
How do I replace the lamp in the VL2600 Wash?
Disconnect power, allow fixture to cool for 15 minutes. Open the lamp cover using the side screws. Carefully remove the old lamp and insert a new 950W MSR lamp, ensuring correct orientation. Close the cover and reset lamp hours via the menu.
What is the correct procedure for cleaning the lens and optics?
Use a soft, lint-free cloth slightly dampened with isopropyl alcohol. Gently wipe the front lens and any accessible optics. Do not use abrasive cleaners. Clean the ventilation grills with a vacuum to prevent overheating.
How do I set the DMX address on the VL2600 Wash?
Access the menu via the control panel. Navigate to DMX Address, use the arrow buttons to set the desired address (1-512). Press Enter to confirm. The display will show the current address.
Can the VL2600 Wash be used outdoors?
No, the fixture is rated IP20 and is designed for indoor use only. Exposure to rain or moisture can cause electrical damage and safety hazards.
What is the zoom range and how does it affect beam angle?
The motorized zoom allows adjustment from 10° to 60°. A narrow beam gives intense spot-like washes, while a wide beam provides broad coverage. Adjust via DMX or menu.
How often should I run the automatic calibration?
It is recommended to run auto-calibration after every 50 hours of use or whenever you notice position drift. This realigns pan/tilt and zoom offsets.
What should I do if the fixture does not power up?
Check the power cable and connection. Ensure the mains supply is within 100-240V AC. Verify the internal fuse (located near the power input). If the fuse is blown, replace with the same rating (T10A/250V).
How do I update the firmware on the VL2600 Wash?
Download the latest firmware from the VARI-LITE website. Connect a USB cable to the DMX input (using a firmware update box or RDM). Follow the instructions in the service manual. Ensure stable power during update.
What spare parts are most commonly needed?
The most common spare parts are the 950W lamp, color wheel modules, power supply unit, and mainboard. Keep a spare lamp and fuses on hand for quick replacement.
How do I troubleshoot a color mixing issue?
First, run a color calibration from the menu. If issue persists, inspect the CMY flags and color wheel for mechanical obstruction. Clean the flags with isopropyl alcohol. If damaged, contact a service center.
User questions about VL2600 Wash VARI-LITE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual VL2600 Wash - VARI-LITE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VL2600 Wash by VARI-LITE.