ZIM428KH - Dishwasher Hansa - Free user manual and instructions

Product Type	Built-in Dishwasher
Brand	Hansa
Model	ZIM428KH
Dimensions (H x W x D)	820 x 596 x 570 mm
Weight	45 kg
Energy Efficiency Class	A+++
Annual Energy Consumption	250 kWh
Water Consumption per Cycle	9.5 L
Noise Level	44 dB(A)
Number of Place Settings	12
Number of Programs	6
Program List	Eco 50°C, Auto, Intensive 70°C, Quick 45°C, Glass, Rinse
Delay Start	Up to 24 hours
Safety Features	AquaStop water protection system
Control Type	Electronic push buttons with LED indicators
Display	Digital (remaining time)
Interior Material	Stainless steel
Upper Basket Adjustment	Height adjustable
Cutlery Tray	Yes (third basket)
Salt and Rinse Aid Indicators	Yes
Self-Cleaning Filter	Semi-automatic
Child Lock	Yes (button lock activation)
Installation Type	Fully integrated (custom panel ready)
Spare Parts Availability	10 years from manufacturer (e.g., filters, spray arms, door seal)

Frequently Asked Questions - ZIM428KH Hansa

How do I start a wash cycle on the Hansa ZIM428KH?

Press the Power button, select a program using the Program Selection button, then press Start/Stop. The dishwasher will begin after a few seconds.

What should I do if the dishwasher doesn't start?

Check that the door is fully closed and latched, the water supply is turned on, and the power cord is plugged in. Also ensure the filter is not clogged.

How do I clean the filters?

Remove the lower basket, unscrew the cylindrical filter and flat filter. Rinse them under running water and scrub if needed. Reassemble in reverse order.

Why is there water left at the bottom after a cycle?

Possible causes: a clogged filter, a kinked drain hose, or a malfunctioning drain pump. Clean the filter and check the hose first.

How do I use the delay start feature?

Press the Delay Start button repeatedly to select the desired delay (up to 24 hours). Then press Start/Stop; the dishwasher will start automatically after the set time.

What detergent should I use?

Use dishwasher detergent in powder, gel, or tablet form. For best results, add rinse aid and salt in the respective dispensers.

How do I activate the child lock?

Press and hold the Child Lock button (usually marked with a padlock icon) for 3 seconds until the indicator light turns on. Repeat to deactivate.

What does the error code E15 mean?

Error code E15 indicates a water leak detected by the AquaStop system. Turn off the water supply and call service.

How often should I descale the dishwasher?

Descaling is recommended every 3 to 6 months depending on water hardness. Use a descaler designed for dishwashers and run a hot cycle without dishes.

Can I install the dishwasher myself?

Yes, but careful leveling and connection to water supply and drain are required. Ensure the electrical connection is done by a qualified electrician if hard-wired.

USER MANUAL ZIM428KH Hansa

EN
Product fiche in accordance with the Commission Delegated Regulation(EU) No 1059/2010 and in accordance with Commission Regulation (EU) No 1016/2010.

Supplier's name or trade mark	Hansa
Type	ZIM428KH
Rated capacity	10
Energy efficiency class 1)	A+++
Annual energy consumption in kWh (AEC ) ( 280 cycles ) 2)	174
Energy consumption of the standard cleaning cycle (Et ) (kWh per cycle)	0,608
Power consumption in off-mode Po [W]	0,45
Power consumption in left-on mode (PI) [W]	0,49
Annual water consumption in litres (AWC) ( 280 cycles ) 3)	2240
Drying efficiency class (ID) 4)	A
Standard programme 5)	ECO
The standard cleaning cycle duration [min]	208
Duration of the left-on mode (TI) [min]	15
Sound pressure level [dB(A) re1 pW]	44
Equipment designed for fitting	v
Height [mm]	815
Height (without worktop) [mm]	815
Width [mm]	448
Depth [mm]	550
Voltage/frequency	230 V / ~ 50 Hz / 10A
Water supply pressure	0.4-10 bar = 0.04-1 Mpa
Total power consumption [W]	1930
Heating element power [W]	1900
Washing pump power [W]	90
Drain pump power [W]	30
Cut-off device [A]	10
Net weight [kg]	34,5

1) A+++ (highest efficiency) to D (lowest efficiency).

2) Energy consumption »X« kWh per annum based on 280 standard cleaning cycles using cold water and energy consumption in power saving modes. Actual energy consumption will depend on how the appliance is used.

3) Water consumption »X« litres per year, based on 280 standard cleaning cycles. Actual water consumption will depend on how the appliance is used.

4) Energy efficiency class »X« on a scale from G (lowest efficiency) to A (highest efficiency).

5) This programme is suitable for washing normally soiled tableware. This is the most effective programme taking into account the total energy and water consumption for this kind of tableware.

The appliance meets the European standards and requirements of the directives in the current version at delivery:

- LVD 2014/35/UE

- EMC2014/30/UE

- EUP 2009/125/EC

The above values have been measured in accordance with standards under specified operating conditions.

Results may vary greatly according to quantity, water hardness, amount of detergent and the level of tableware soil, etc. The manual is based on the European Union's standards and rules.

We reserve the right to make design and technical changes to the appliance.

ӨНІМ ТӨЛҚЬЖАТЫ

Blank white image with a single gray rectangle in the bottom right corner (no text or symbols)