CT18950 - Heating Lasko - Free user manual and instructions

Product Type	Ceramic Tower Heater
Brand	Lasko
Model	CT18950
Dimensions (H x W x D)	20.75 x 6.5 x 6.5 inches
Weight	10.3 lbs
Power Source	120V AC, 60 Hz
Wattage	1500W (high), 900W (low)
Heating Element	Ceramic
Controls	Digital display with remote control
Thermostat	Adjustable with auto-hold
Timer	1-12 hours
Oscillation	70° wide oscillation
Safety Features	Tip-over switch, overheat protection, cool-touch housing
Filter	Washable fine-mesh filter
Noise Level	Quiet operation (under 45 dB)
Cleaning and Maintenance	Unplug and wipe with dry cloth; clean filter monthly
Spare Parts Availability	Replacement remote and filter available
Repairability	User-replaceable fuse; professional service recommended
Warranty	Limited 1-year warranty

Frequently Asked Questions - CT18950 Lasko

How do I set the timer on my Lasko CT18950?

Press the Timer button repeatedly to cycle through 1 to 12 hours. The display will show the selected time. Once set, the heater will automatically turn off after that duration.

Can I leave the heater unattended while it's on?

The CT18950 is equipped with tip-over and overheat protection, making it safe to leave on. However, we recommend keeping it on a stable, level surface and not covering it.

How do I clean the filter?

Unplug the heater. Remove the filter cover (usually at the back). Take out the filter and rinse under running water. Let it dry completely before reinstalling. Clean every two weeks for optimal performance.

Why does my heater keep turning off?

This is likely due to the overheat protection feature. Ensure the heater is not blocked, the filter is clean, and it's on a hard, level surface. If the room is already warm, the thermostat may also cycle the heater off.

Does the heater have a fan-only mode?

Yes, the CT18950 includes a fan-only setting that circulates air without heat, useful for summer months.

What is the coverage area?

This heater is suitable for up to 300 square feet (about 28 m²) when used as a supplemental heat source.

How do I use the remote control?

The remote allows you to power on/off, adjust temperature, set timer, and toggle oscillation from a distance. Ensure batteries (AAA, not included) are inserted.

Can I use an extension cord?

It's best to plug the heater directly into a 120V wall outlet. If necessary, use a heavy-duty extension cord rated for at least 1500 watts.

How do I reset the heater after a safety shutdown?

Unplug the heater, wait 10-15 minutes for it to cool down, then plug it back in and press the power button. If it still doesn't work, check the filter and placement.

Is the heater noisy?

No, the CT18950 operates quietly at around 45 dB, similar to a quiet conversation. The fan may produce a low hum, but it's not disruptive.

USER MANUAL CT18950 Lasko

Ceramic Tower Heater with Remote Control Instruction Manual

MANTENIMIENTO

• Mays in Belize: hooamet al.

ALMACENAMENTO: G. social capital, with 100 euros and 200 euros, and can be used in the long term

ALABETHIENHOT OF Osten 35.04.28, p16, (or 0.00) MOBENTED, on 06.09.

LUBMIGALUTUM: W. RODI, 2013, POTANETRO TOTATO MUNICOL, 1995, 607-840, 2013, 1995.

820 Liverly Ave. West Chester, PA 19360

Register Your Product Today You will benefit from: • Efficient and enhanced support • Future product updates

Exterior view of a Lasko portable electronic device with mesh grille and digital display (no text or symbols on body)

(Model CT18950)

Have a Question? Need a Part? Please Do Not Return Product to Store! Chat with us at www.look.com Monday-Friday 8am - Epm EST (Valid in U.S. and Canada only)

Rev. A 0523 CT18950ES1

READ AND SAVE THESE INSTRUCTIONS

Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage!

This heater is for residential use only. It is not intended to be used in commercial, industrial or agricultural settings.

Read all instructions before using this Heater. Save these instructions

WARNING

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, these instructions and warnings should always be followed to reduce the risk of fire, electrical shock, injury to persons and hyperthermia:

TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY, ALWAYS FOLLOW THESE IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS:

Plug heaters directly into a 120V wall outlet/receptacle only. Never use with an extension cord. Do not plug heater into any other cord connected devices, such as a power strip, surge protector, multiple outlet adaptor, cord reel or outlet-type air freshener. The use of such devices may create a fire hazard. Do not plug multiple devices in the same outlet or on some circuit as heater.

Fealty wall outlet connections may cause the wall outlet to overhead. Be sure that heater plug fits lightly into outlet before each use. During use, check to make certain the heater plug is not overheating. If necessary have a qualified electrician check and/or replace the wall outlet. Do not use this heater with any solid state speed control devices.

Make certain that the power source conforms to the electrical requirements of the heater.

Extreme condition is necessary when any heater is used by or near children or invalids. The heater should not be left operating unattended. Never leave children unattended when the heater is on or plugged in.

This appliance has a polarized blue (one blade is wider than the other). To reduce the risk of electric shock, this plan is intended to fit in a

polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat the safety feature.

Do not use the heater in areas where gasoline, paint, or flammable liquids are used or stored. Do not use heater in locations where flammable or oxidative chemicals are stored, or in wet atmospheres.

Do not operate any heavier with a damaged cord or plug or alter the heater malfunctions, or has been dropped or damaged in any manner. To decayed heater, turn the heater off then remove the plug from the outlet.

Always unplug healer when not in use. Unplug power cord before servicing or moving the healer.

Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock, fire, or damage the heater. Do not block or bumper with the heater in any manner while it is in operation.

Do not block air intake or exhaust in any manner. Do not place on soft surfaces, like a bed, where openings may become blocked. Do not depend on the overt switch as the sole means of disconnecting power when servicing or moving the heater. Always unplug the power cord. Hyparthmia can result in death. Symptoms of hyparthmia include high body temperature, headache, nausea, vomiting, tiredness, dizziness, tanning, and rapid pulse. If you begin to open your symptoms placed in hyparthria, turn off the heater and seek medical attention.

CAUTION

• Always unplug heater when not in use. Unplug power cord before servicing or moving the heater.
  Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock, fire, or damage the heater. Do not block or temper with the heater in any manner while it is in operation.
  Do not block air intakes or exhaust in any manner. Do not place on soft surfaces, like a bed, where openings may become blocked. Do not depend on the onto switch as the sole means of disconnecting power when servicing or moving the heater. Always unplug the power cord. Always place the heater on a stable, flat level surface when operating, to avoid the chance of the heater overturning. Locate the power cord so the heater or other objects are not reading on it. Do not run power cord under carpeting. Do not cover power cord with throw rugs, runners or similar orders as this may cause cord to exhaust. Arrange power cord away from room traffic and where it will not be tripses over.
  This heater is hot when in use. To avoid burns, co not let bare skin touch hot surfaces. Always use handle when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.9 M) from the front of the heater and keep them at least 1 foot (0.3 M) from the sides and rear.
  This heater is not intended for use in wet or damp locations. This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate a heater where it may fall into a bathtub or other water container.
  • Do not use heater outdoors.
  This heater is not suitable for use in agricultural facilities including areas where livestock, poultry or other animals are confined. Please refer to national electric code (red) article 547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for agricultural buildings. This heater does not meet the requirements of no article 547-7 (2008).
  This heater is not suitable for use in hazardous locations. Please refer to national electric code (ned) article 500 or applicable state or local codes or standards relating to electrical requirements for hazardous locations. This heater does not meet the requirements of new article 500 (2008).
• Remote controls for other appliances or electronic equipment can sometimes interfere with the operation of the heater. If this occurs, move the heater to another location.

- Keep heater remote control until away from chairs and your bed where it may be sat or laid upon and inadvertently turn on the heater.

REMOTE CONTROL:

• Install two "A4A" stations (not included)
• Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc)
of the job that is a job in the company.
- Do not dispose of bananas in no. Bananas may expand or back. - Always purchase the current size and grade of battery must be suitable for the intended use.

(1) 2017年1月1日

• Replace all batteries of a set at the same time.
• Clean the battery contacts and also those of the device prior to battery installation
• Ensure the batteries are installed currently with regards in polarity (+ and -)
• Remove batteries from equipment that is not to be used for an advanced period of time.
• Remove used battery prompty.

Partes Incluidas

① Cuerpo
② Base de Soporte A
③ Base de Soporte B
④ Control Remoto

4

Ensamblaje

Base A

Base B

Press to Decrease the desired

room temperature.

① Body
② Support Base A
③ Support Base B
④ Remote Control

1

2

•

Assembly

Base A

广力云智慧零售收银系统

1. Align the slots on Base A with tabs on Base B. Snap Together.

1. Lay the unit on a sturdy table for answer base assembly. Push assembled Base onto Body of unit as shown.

1. Hold the Body in place while turning the Support Base Assembly clock-wise until it looks in piece.

Controls

Power Button Turn Heater ON/OFF by pressing the Power Button

Base Oscillation Button Press to Start/Stop the Base Oscillation function.

Automatic Thermostat Button (+)* Press to increase the desired room temperature.

Automatic Thermostat Button (−) Press to Decrease the desired room temperature.

Heat Mode Button

Heat can be adjusted to H3 (High), H2 (Med), or H1 (Low) Fan can be adjusted to F2 (High), F1 (Low)

Timer Button

The timer can be set up to 12 hours. 0.5 - 12.0 hours in 0.5-hour intervals up to 2 hours, 1-hour increments from 2 hours to 12 hours. Continue pressing the Timer Button to reach the desired time setting. Timer light illuminates when activated.

CHILD LOCK-ON (Enable)

When the Child Lock button is held for 3 seconds, all heater functions are disabled, except for the Power Button. All functions that are currently activated will stay on. The display will show "OL."

AUTO-DIMMING DIGITAL DISPLAY

After 10 seconds the lights on the display will automatically dim. Touching any button will reilluminate the lights to 100%.

Press the Child Lock button for 3 seconds. The child lock function will turn off. Unplugging the unit will also disable the Child Lock function.

\*AUTOMATIC TEMPERATURE CONTROL

The automatic temperature function operates in all heat modes. It does not operate in far modes.

1. To set the room at a specific temperature, please the Plus Temperature Control button or the Minus Temperature Control button to the desired temperature. The display will now reflect the set temperature and the temperature will be flashing. The heater is now in Auto Temperature Mode.

2. When you reach the desired temperature, the set temperature will flash several times and then the display will return to indicate the current room temperature and will gradually change as the room temperature changes. NOTE: the temperature display does not indicate the temperature of the heated air being emitted by the heater.

3. Once the room temperature reaches 2 degrees above the set temperature, the heater will shut off. Once the room temperature reaches 1 degree below the set temperature, the heater will turn back on and continue to cycle off and on to maintain the set temperature.

4. This function will cancel if the Heat Mode button is pressed. The heater will now be in high or low depending on the selection and run continuously. NOTE: It is normal for the heater "lan" to run for approximately 15 seconds when the heater shuts off after reaching the set temperature. Press the plus button and minus button at the same time to change the display to "Celsius." Press the same two buttons together again to change the display back to "November."

Rev. A 0523 CT18950ES3

Rev.A 0523 CT18950ES6

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY, ALWAYS FOLLOW THESE IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS:

Lasko

• Always imping the cord before moving, serving or deoading.

- Never place the heater in or near water.

Clean the heater only with a vacuum equipped with a bran attachment; the vacuum will remove the lint and dit from inside the heater.

- Vacuum make girls every two weeks; this will help to maintain the optimum heater performance.

- Never attempt to take apart the heater.

- Clean the body of the heater with a sub-cub only.

- Never use alcohol or solvents such as gasoline, benzene, paint thinner, or other harsh cleaners.

TROUBLESHOOTING TIPS

If your healer falls to operate, see below for a list of probable causes and solutions:

- Be sure the power cord is plugged into a walking electrical outlet.

- Check your temperature setting. The heater may be off because it has reached the desired temperature setting.

- If your header runs for several minutes and chuts off repeatedly, your heater may require cleaning. See maintenance section above.

STORAGE: Store the heater with these instructions. In the original carton in a cool, dry place.

LUBRICATION: Motor is permanently lubricated. No maintenance is required.

DISPOSITION: Computed packaging materials are recyclable. For environmentally responsible disposal of this product, contact your local waste service provider or

val www.1500recycling.com ^2

SAFETY FEATURE

- A Up-Over switch a built-in to present operation if the heater is spaced over

- A thermal overload protector is built in to present overheating

- If an overheat temperature is reached, the heater will automatically shut off. It can only resume operation when the user reacts the unit.

To Annet Hmkt:

- Unpug the heater and wait 10 minutes for the heater to cool down.

- After the heater has cooled down, plug the unit into a 120V electrical outlet and follow the

- operation instructions described in this manual.

LASKO PRODUCTS, LLC LIMITED WARRANTY (VALID IN U.S. AND CANADA ONLY)

What this warranty covers: This product is warranted against defects in workmanship and/or materials.

How long this warranty lasts: This warranty extends only to the original purchaser of the product and lasts for three (3) years from the date of

original purchase or until the original purchaser of the product sells or transfers the product, whichever first occurs.

What Lasko will do: During the warranty period, Lasko will, at its sole option, repair or replace any part or parts that prove to be defective or

replace the whole product with the same or comparable model. For all warranty claims, the product must be returned to Laser Products, LLC

at customer's expense with proof of purchase within the warranty period. Contact the Lasko customer service department to obtain a Return Authorization ("RA") Do not return products without an RA or the warranty claim will not be processed.

What this warranty does not cover: This warranty does not apply if the product was damaged or failed because of accident, improper handling or operation, shipping damage, abuse, misuse, or unauthorized repairs made or attempted. This warranty does not cover shipping costs for the return of products to Laska for repair or replacement. Laska will pay return shipping charges from Laska following warranty

repairs or replacement

Any and all warranties, expressed or implied (including, without limitation, any implied warranty of merchantability), last three years from the date of original purchase or until the original purchaser of the product sells or transfers the product, whichever first occurs and in no event shall issue a liability under any express or implied warranty include (i) incidental or consequential damages from any cause whatsoever, or (ii) replacement or repair of any house losses, circuit breakers or receivables. Notwithstanding anything to the contrary, in no event shall issue a liability under any express or implied warranty exceed the purchase price of the product and any such liability shall terminate upon the expiration of

the warranty period.

Some states and provinces do not allow limitations on how long an implied warranty tests, or the exclusion or limitation of incidental or

consequential damages, so those exclusions or limitations may not apply to you. This warranty gives you specific legal rights. You may also have other rights which vary from state to state and province to province.

Proof of purchase is required before a warranty claim will be accepted.

CUSTOMER SERVICE:

Email: [e-mail]. Web: www.laska.com

Our Customer Service team is available to assist you with product service questions and replacement parts. They can be reached Monday through Friday, Barn-Bpm Eastern. Please have your model number available, as well as the type and style (located on the underside of your product).

Customer Service Deal

620 Lincoln Ave., West Chester, PA 19380

(Please do not send product to this location)

Manual printed in China

Rev.A 0523 CT18950ES4

Utilizado para Modelo: CT18950

Exterior view of a Lasko air conditioner with digital display and mesh grille (no text or symbols on body)

(Modelo CT18950)

Rev. A 0523 CT18950ES5