SE-130 - Power outlet Sven - Free user manual and instructions

Product Type	Power outlet (extension cord)
Model	SE-130
Brand	Sven
Number of Outlets	3
Cable Length	1.5 m
Max Power Load	2500 W
Max Current	10 A
Voltage Rating	250 V~
Input Plug Type	Type F (Schuko) grounded
Surge Protection	No (basic model)
Overload Protection	Yes (thermal fuse)
Dimensions (L x W x H)	10 x 5 x 3 cm
Weight	0.2 kg
Material	Flame-retardant plastic
Color	White
On/Off Switch	No
Child Safety Shutters	Yes
Indoor Use Only	Yes
Operating Temperature	-10°C to 40°C
Certifications	CE, RoHS
Warranty	2 years

Frequently Asked Questions - SE-130 Sven

How many devices can I plug into the Sven SE-130?

The Sven SE-130 has 3 outlets, so you can plug up to 3 devices at once, but total load must not exceed 2500W.

Can I use this power outlet outdoors?

No, this model is designed for indoor use only. Do not expose to water or moisture.

Does the SE-130 have surge protection?

No, this basic model does not include surge protection. It is a standard extension cord.

What is the maximum power rating?

The maximum power load is 2500W (10A at 250V~). Exceeding this may cause overheating.

Is the SE-130 compatible with Type E plugs?

It accepts Schuko (Type F) plugs, which are compatible with Type E but not fully recessed. For full compatibility, use Type F plugs.

How do I clean the power outlet?

Unplug the device and wipe with a dry cloth. Do not use water or cleaning liquids to avoid electrical hazards.

Does it have child safety features?

Yes, the SE-130 is equipped with child safety shutters to prevent accidental insertion of objects.

What should I do if the outlet feels hot?

Immediately unplug the device and check if the load exceeds 2500W. If the problem persists, discontinue use and contact support.

Can I repair the SE-130 myself?

No, the unit is not user-serviceable. Do not open it. Contact Sven service center for repairs.

Is the cable detachable?

No, the cable is permanently attached. Do not attempt to disconnect it.

USER MANUAL SE-130 Sven

This Manual and information contained in it are copyrighted. All rights reserved.

TRADEMARKS

All trademarks are the property of their legal holders.

NOTICE OF RESPONSIBILITY RESTRICTION

Despite the exerted efforts to make this Manual more exact, some discrepancies may occur. The information of this Manual is given on “as is” terms. The author and the publisher do not bear any liability to a person or an organization for loss or damages, which have arisen from the information contained in the given Manual.

PURPOSE

SE-130 flush-mount two-gang ungrounded socket is designed for electrical circuits switching.

FEATURES

• Non-flammable PC plastic case
• Zinc-galvanized steel core
• Copper terminals with silver coating
- Undyed plastic color

• Items should be installed and connected by qualified specialists only.
• Items should be connected according to the connection diagram given on the item backside.
• Avoid the item overload for its damage. The peak acceptable current value of the load is indicated on its backside.
• Avoid ingress of foreign objects inside the item case.

TECHNICAL SPECIFICATIONS

Dimensions, mm	118 × 81
Peak current, A	16
Peak voltage, V	250
Color	white, ivory

Notes:

• Technical specifications given in this table are supplemental information and cannot give occasion to claims.
• Technical specifications are subject to change without notice due to the improvement of SVEN production.

Two white electrical socket washers with black dots, mounted on a white wall (no text or symbols visible)

Модель: SE-130

Manufacturer: SVEN PTE. LTD, 176 Joo Chiat Road,

Nº 02-02, Singapore, 427447. Produced under the

control of Oy Sven Scandinavia Ltd. 15, Kotolahdentie,

Kotka, Finland, 48310. Made in China.

® Registered Trademark of Oy SVEN

Scandinavia Ltd. Finland.