AVR480 - Audio Receiver JBL - Free user manual and instructions
Find the device manual for free AVR480 JBL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio/Video Receiver |
| Brand | JBL |
| Model | AVR480 |
| Channels | 7.1 |
| Power Output per Channel | 100W (8 ohms, 20Hz-20kHz, THD 0.08%) |
| Dimensions (W x H x D) | 17.3 x 6.5 x 15.4 inches (440 x 165 x 391 mm) |
| Weight | 28.0 lbs (12.7 kg) |
| Power Consumption | 800W (standby: 0.5W) |
| Inputs | 5 HDMI, 2 component, 3 composite, 4 optical, 2 coaxial, 7.1 multichannel analog |
| Outputs | 1 HDMI (with ARC), 1 subwoofer, 7.1 pre-out, speaker terminals |
| Audio Decoding | Dolby Digital, DTS, Dolby Pro Logic II |
| Radio Tuner | AM/FM with 30 presets |
| Multi-Zone | 2-zone, 2-source |
| Remote Control | Backlit LCD remote |
| Cleaning Instructions | Wipe with a soft, dry cloth. Do not use solvents. |
| Safety Precautions | Do not expose to moisture. Keep ventilation slots clear. Do not open chassis. |
| Spare Parts Availability | Remote, antenna, feet available from JBL service centers |
| Repairability | Fuse replaceable; service by qualified technician only |
| General Information | Designed for home theater with 7.1 surround sound, 4K passthrough, and easy setup |
Frequently Asked Questions - AVR480 JBL
How do I reset the JBL AVR480 to factory settings?
To reset, press and hold the MAIN button on the front panel while turning the unit on. Keep holding until the display shows 'RESET'. Release to confirm.
What speakers should I use with the AVR480?
Use 8 ohm speakers with a power rating between 50W and 150W. For best results, use a matching set of front, center, surround, and subwoofer.
How do I connect my TV to the receiver?
Connect an HDMI cable from your TV's HDMI ARC port to the AVR480's HDMI ARC output. Alternatively, use optical audio if HDMI is not available.
Does the AVR480 support 4K video?
Yes, it supports 4K passthrough at 60Hz. Note that the receiver does not upscale content to 4K.
How do I set up the FM/AM tuner?
Connect the included AM and FM antennas. Press TUNER on the remote, then use the SEEK button to find stations. Press MEMORY to store presets.
Why is there no sound from the speakers?
Check that the receiver is set to the correct input, the volume is not muted, and speaker wires are securely connected. Also verify that the source device is outputting audio.
Can I control the AVR480 with a universal remote?
Yes, the AVR480 uses standard IR codes. Program your universal remote using code 306 for JBL receivers, or search for JBL code sets.
How do I update the firmware?
The AVR480 does not have user-updatable firmware. Contact JBL support if an update is needed.
What is the recommended maintenance?
Clean the exterior with a soft cloth. Ensure ventilation is unobstructed. Periodically check speaker connections and tighten if loose.
Where can I buy replacement parts?
Contact JBL customer service or visit an authorized service center. Common parts like the remote control or antenna can be ordered online.
User questions about AVR480 JBL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio Receiver in PDF format for free! Find your manual AVR480 - JBL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AVR480 by JBL.