FlexClean 93391 - Vacuum Cleaner RugDoctor - Free user manual and instructions
Find the device manual for free FlexClean 93391 RugDoctor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Carpet Cleaner |
| Brand | RugDoctor |
| Model | FlexClean 93391 |
| Dimensions (L x W x H) | 20 x 12 x 44 inches |
| Weight | 25 lbs |
| Power Supply | 120V ~ 60Hz |
| Amperage | 8 Amps |
| Clean Water Tank Capacity | 1 gallon |
| Dirty Water Tank Capacity | 1 gallon |
| Cord Length | 25 feet |
| Cleaning Path Width | 10 inches |
| Brush Roll Type | Dual rotating brushes |
| Suction Power | 200 air watts |
| Cleaning Modes | Deep clean, rinse, and dry |
| Water Heating | No, uses tap water |
| Solution Tank | Detachable, 32 oz capacity |
| Warranty | 2 years limited |
| Included Accessories | Detail hose, stair tool, upholstery tool |
| Noise Level | 75 dB |
Frequently Asked Questions - FlexClean 93391 RugDoctor
How do I assemble the RugDoctor FlexClean 93391?
The FlexClean 93391 comes mostly assembled. Attach the handle, insert the clean water tank, and connect the hose. Refer to the manual for detailed steps.
What type of cleaning solution should I use?
Use only RugDoctor brand carpet cleaning solution to maintain warranty and optimal performance. Do not use household detergents.
How do I clean after use?
Empty both the dirty and clean water tanks. Rinse the tanks with warm water. Remove any debris from the brush roll and store the machine upright.
Why is my machine not spraying water?
Check that the clean water tank is properly seated and has sufficient water. Ensure the trigger is pressed fully. If still no spray, the nozzle may be clogged; clean it with a pin.
How often should I replace the brush roll?
The brush roll should be replaced every 6-12 months depending on usage. Signs of wear include reduced cleaning performance or visible damage.
Can I use the FlexClean on upholstery?
Yes, the FlexClean includes an upholstery tool and a detail hose. Use the upholstery setting and test on an inconspicuous area first.
What is the best way to dry carpets after cleaning?
Allow the carpet to air dry with good ventilation. Turn on fans or open windows. Avoid walking on the carpet until completely dry, typically 6-12 hours.
How do I remove the dirty water tank?
Lift the release latch on the front of the tank and pull it out. Empty the tank over a sink or drain. Rinse the tank before reinserting.
What should I do if the machine loses suction?
Check if the dirty water tank is full and empty it. Inspect the hose for clogs. Also clean the filter located under the top cover. If problem persists, contact support.
Where can I purchase spare parts?
Spare parts are available on the RugDoctor website or through authorized retailers. Keep your model number handy: FlexClean 93391.
User questions about FlexClean 93391 RugDoctor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual FlexClean 93391 - RugDoctor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FlexClean 93391 by RugDoctor.