MS24RFS2RW - Fridge Marvel - Free user manual and instructions
Find the device manual for free MS24RFS2RW Marvel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Undercounter Refrigerator |
| Brand | Marvel |
| Model | MS24RFS2RW |
| Width | 24 inches (61 cm) |
| Depth | 24 inches (61 cm) |
| Height | 34.5 inches (87.6 cm) |
| Net Weight | 132 lbs (60 kg) |
| Power Supply | 115 V, 60 Hz, 15 A |
| Annual Energy Consumption | 345 kWh/year |
| Refrigerant Type | R-600a (Isobutane) |
| Refrigerant Charge | 1.8 oz (51 g) |
| Capacity | 5.1 cu. ft. (144 L) |
| Temperature Range | 34°F to 44°F (1°C to 7°C) |
| Number of Shelves | 3 adjustable glass shelves |
| Crisper Drawers | 2 humidity-controlled drawers |
| Door Bins | 4 adjustable door bins |
| Lighting | LED interior light |
| Control Type | Digital electronic thermostat |
| Defrost Type | Automatic |
| Door Hinge | Right-hand, factory reversible |
| Installation Type | Built-in or freestanding |
| Cleaning | Clean with mild soap and water; condenser coils annually |
| Safety | Child safety lock; tip-restraint strap included |
| Parts & Repairability | Replaceable door gasket, shelves, bins; compressor warranty 5 years |
Frequently Asked Questions - MS24RFS2RW Marvel
How do I adjust the temperature on my Marvel MS24RFS2RW refrigerator?
Press and hold the Set button for 3 seconds, then use the up/down arrows to set between 34°F and 44°F. The display will show the desired temperature.
Why is my refrigerator not cooling properly?
Check if the condenser coils are dirty, ensure the door is fully closed, and verify the temperature setting. Also, allow 24 hours after installation for stabilization.
Can I reverse the door hinge direction?
Yes, the door is field reversible. Follow the instructions in the manual to move hinges to the opposite side. You will need a screwdriver and possibly a helper.
How often should I clean the condenser coils?
Clean the coils every 6 months or more often if dusty. Use a vacuum or soft brush. This improves efficiency and extends lifespan.
What is the recommended clearance for built-in installation?
Allow 1/8 inch clearance on top and sides for proper air circulation. The front grille must remain unobstructed.
The interior light is not working. What should I do?
Check that the LED light is not burnt out. If it does not turn on, contact customer service for a replacement. It is not user-serviceable.
How do I remove the door bins for cleaning?
Lift the bin slightly and pull straight out. To install, align the tabs with the slots and push down until it clicks. Wash with mild detergent and dry before replacing.
My refrigerator is making a clicking noise. Is that normal?
Some clicking sounds are normal when the compressor or fans turn on/off. If the noise persists or becomes loud, check that the unit is level and not touching walls.
What should I do if the door does not seal properly?
Check the gasket for debris or damage. Clean with warm soapy water. If the gasket is deformed, it may need replacement. Ensure the unit is level.
How long does it take to get cold after first setup?
It typically takes 8-12 hours to reach optimal temperature. Avoid opening the door frequently during this period. Adjust settings after 24 hours.
User questions about MS24RFS2RW Marvel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fridge in PDF format for free! Find your manual MS24RFS2RW - Marvel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MS24RFS2RW by Marvel.