CV3106 - Smoke detector KIDDE - Free user manual and instructions
Find the device manual for free CV3106 KIDDE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hardwired Smoke Detector with Battery Backup |
| Brand | Kidde |
| Model | CV3106 |
| Dimensions | 5.1 inches diameter x 1.5 inches depth (13 x 3.8 cm) |
| Weight | 0.5 lbs (0.23 kg) |
| Power Source | 120V AC, 60Hz; 9V DC battery backup (alkaline) |
| Detection Technology | Photoelectric |
| Sound Output | 85 dB at 10 feet (3 m) |
| Operating Temperature | 40°F to 100°F (4°C to 38°C) |
| Humidity Range | Up to 95% relative humidity, non-condensing |
| Interconnect Capability | Yes, up to 24 Kidde units (wireless or wired) |
| Test/Silence Button | Yes; test alarm function and silence nuisance alarms |
| Low Battery Indicator | Chirp approximately every 30-40 seconds |
| End-of-Life Warning | Chirp 2 times per second; unit must be replaced after 10 years |
| LED Indicator | Green for AC power, red for alarm, flashing red for memory |
| Compliance | UL listed, NFPA 72 compliant |
| Maintenance | Vacuum dust from vents monthly; replace battery annually; replace unit every 10 years |
| Spare Parts Available | Replaceable 9V battery only; no other serviceable parts |
| Repairability | Not repairable; dispose of unit and replace if defective |
| Warranty | Limited 10-year warranty |
Frequently Asked Questions - CV3106 KIDDE
How do I install the Kidde CV3106 smoke detector?
Turn off AC power at the circuit breaker. Connect the wiring harness: black to black (hot), white to white (neutral), and yellow/orange for interconnect. Attach the mounting plate to the ceiling or wall. Insert the 9V backup battery, twist the detector onto the plate, and restore power. Press the test button to confirm operation.
Why is my smoke detector chirping?
A chirp every 30-40 seconds indicates a low battery. Replace the 9V alkaline battery. If chirping persists, it may be a malfunction or end-of-life warning (2 chirps per second). Clean the detector and if the issue continues, replace the unit.
How do I silence a false alarm?
Press the test/silence button to hush the alarm for about 15 minutes. If the smoke clears, the alarm will reset. If the alarm persists, there may be actual smoke or steam. Avoid disabling the detector; instead, ventilate the area.
Can I interconnect multiple Kidde CV3106 detectors?
Yes, the CV3106 supports interconnect via a yellow/orange wire. You can connect up to 24 Kidde units (including smoke, heat, and CO alarms). When one alarm triggers, all interconnected alarms will sound. Follow the wiring diagram in the manual.
How often should I clean the smoke detector?
Clean the detector at least once a month. Use a vacuum cleaner with a soft brush attachment to remove dust from the vents. Avoid using water, cleaners, or solvents. Regular cleaning helps prevent false alarms and ensures proper sensitivity.
What does the LED light mean?
A steady green LED indicates AC power is on. A blinking red LED every 30-40 seconds in standby is normal. A solid red LED means the alarm is sounding. A flashing red LED (with chirps) indicates the alarm has been activated recently (memory). If the detector is chirping and LED is not green, check the battery or AC connection.
When should I replace the Kidde CV3106?
Replace the smoke detector every 10 years from the date of manufacture (check label on back) or when the end-of-life warning (two chirps per second) sounds, or if it fails the test button. After a decade, the sensor may degrade. Also replace immediately if it malfunctions.
What type of battery does the CV3106 use?
The CV3106 uses a standard 9V alkaline battery as backup. Only replace with a fresh 9V battery. Do not use rechargeable batteries. Replace the battery at least once a year or when the low battery chirp sounds.
Can I install this detector in a mobile home?
Yes, the CV3106 is suitable for use in mobile homes. Ensure it is mounted on the ceiling or wall as per building codes. In mobile homes, avoid mounting near corners or dead air spaces. Check local regulations for additional requirements.
What should I do if the test button does not produce an alarm?
First, check that AC power is on (green LED) and the battery is fresh. Press and hold the test button for at least 5 seconds. If no alarm sounds, clean the detector and retry. If still no sound, the unit may be defective; replace it immediately.
User questions about CV3106 KIDDE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Smoke detector in PDF format for free! Find your manual CV3106 - KIDDE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CV3106 by KIDDE.