IGS-1000-4UP2X - Network switch Planet - Free user manual and instructions
Find the device manual for free IGS-1000-4UP2X Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Managed Ethernet Switch |
| Model | IGS-1000-4UP2X |
| Port Configuration | 4 x 10/100/1000T PoE+ (RJ-45) + 2 x 100/1000X SFP Slots |
| PoE Standard | IEEE 802.3af/at (PoE/PoE+) |
| PoE Power Budget | 60W total, up to 30W per port |
| Switching Capacity | 12 Gbps |
| MAC Address Table | 8K entries |
| Jumbo Frame Support | 9K bytes |
| Mounting | DIN-Rail or Wall Mount |
| Operating Temperature | -40°C to 75°C |
| Power Supply | 48-55V DC via terminal block |
| Power Consumption | Max. 72W (with PoE load) |
| Dimensions (W x D x H) | 135 x 95 x 50 mm |
| Weight | 0.6 kg |
| LED Indicators | Power, PoE status, Link/Activity per port |
| Safety Certifications | CE, FCC, UL (Industrial) |
| Maintenance | Clean with a dry cloth; avoid liquids |
| Spare Parts & Repairability | No user-serviceable parts; contact Planet support for repairs |
| General Information | Designed for harsh industrial environments; provides reliable PoE+ connectivity |
Frequently Asked Questions - IGS-1000-4UP2X Planet
What is the default IP address of the IGS-1000-4UP2X?
The default IP address is typically 192.168.0.100. However, if the switch is unmanaged variant, there is no IP configuration. For managed version, refer to the user manual for reset procedure.
Can I use standard Ethernet cables for PoE?
Yes, standard Cat5e or higher Ethernet cables are sufficient for PoE+ up to 30W per port. Ensure cable length does not exceed 100 meters.
How do I reset the switch to factory defaults?
Press and hold the reset button (located near the power terminal) for about 10 seconds until all LEDs flash simultaneously. Release the button to complete reset.
What power supply voltage is required?
The switch requires a 48-55V DC power supply. It is typically powered via a 48V PoE power source or an external terminal block. Do not exceed 55V.
Does this switch support VLAN configuration?
The IGS-1000-4UP2X is a Layer 2 managed switch. It supports 802.1Q VLAN tagging, including port-based and tag-based VLANs. Refer to manual for configuration.
What is the maximum current per PoE port?
Each PoE port can deliver up to 30W (IEEE 802.3at) at 48V, which corresponds to approximately 625 mA. The total budget is 60W, so power distribution must be balanced.
Can I mount the switch on a wall?
Yes, the switch supports both DIN-rail and wall mounting. Use the provided mounting brackets and screws. Ensure the surface is solid and ventilated.
How do I check the firmware version?
Connect to the switch via a web browser or console. Under 'System Information' or 'Maintenance', you can view the current firmware version. Updates are available on Planet's website.
What should I do if a PoE device is not powering on?
First, check if the total power budget (60W) is not exceeded. Verify the cable is Cat5e or better and properly terminated. Try a different port. If the issue persists, contact Planet support.
Is the switch suitable for outdoor use?
The switch has an operating temperature range of -40°C to 75°C, making it suitable for outdoor cabinets. However, it is not weatherproof; install in a protected enclosure rated at least IP54.
User questions about IGS-1000-4UP2X Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual IGS-1000-4UP2X - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IGS-1000-4UP2X by Planet.