TC 1630 - Loudspeaker Glemm - Free user manual and instructions
Find the device manual for free TC 1630 Glemm in PDF.
| Product Type | Audio Speaker |
| Brand | Glemm |
| Model | TC 1630 |
| Application | PA Systems (70V/100V) |
| Operating Voltage | 70V or 100V |
| Power Taps | 30W (100V), 15W (70V) |
| Wiring Type | Constant voltage with common black wire |
| Connection | Parallel for multiple speakers |
| Installation | Wall mount using back hole |
| Compliance | CE marked |
| Warranty | According to national and European regulations |
| Service | www.glemm.eu |
| Safety | Professional installation required; turn off amplifier before connection |
| Manual | Keep for future reference |
| Manufacturer | Glemm |
| Cable Section | According to distance and power |
Frequently Asked Questions - TC 1630 Glemm
User questions about TC 1630 Glemm
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Loudspeaker in PDF format for free! Find your manual TC 1630 - Glemm and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TC 1630 by Glemm.
USER MANUAL TC 1630 Glemm
Audio speaker operating at 70/100V, intended for PA systems.
The high quality of the components used for its construction guarantees an excellent acoustic performance.
The installation of this product must be carried out exclusively by specialized technicians, skilled in electric and audio systems.
In case of wrong installation or connections, the manufacturer doesn't take any responsibility for damages to people or objects.
Refer to the below picture (fig.1) for correct cable connection. Before starting the installation, make sure that the amplifier is turned off. There could be a dangerous voltage on the connection terminals during operations.
Keep the instruction manual for future reference. You can place speaker at wall using small hole on the backside fixing on common nail.
A. 70V / 100V wiring
If you wish to connect the speaker to a constant voltage system, put the common BLACK wire into the "COM" socket of the amplifier, then:
- In 100V systems, connect the WHITE (30W) or BLUE (15W) wire to the "100V" socket of the amplifier.
- In 70V systems, connect BLUE (15W) wire to the "70V" socket of the amplifier.
If you need to connect more than one speaker, after checking the total power, you can connect them to the amplifier with a “parallel” connection.
Remember to consider the correct section of the cables, according to the distance of the speakers from the amplifier.
Consider carefully the power of the speakers and of the amplifier to which they are connected: the total power of the speakers must not exceed the amplifier's power.
B. Compliance, warranty and service
The CE brand indicates that the product complies with the essential requirements of the applicable European directives and related standards. The product is covered by warranty according to current national and European regulations.
For complete warranty conditions and for technical service requests visit the website: www.glemm.eu. We also suggest to register your product, by logging into the website's private area. In this way you will have the possibility to receive updates and information on our items.
The manufacturer, in order to improve its products, reserves the right to modify the characteristics whether technical or aesthetic, at any time and without notice.
PRODOTTO DA / PRODUCED BY:
KARMA ITALIANA Srl
Via Gozzano 38/bis
21052 Busto Arsizio (VA)
www.karmaitaliana.it
www.glemm.eu
Made in P.R.C.
Brand : Glemm
Model : TC 1630
Category : Loudspeaker