CS 220 - Loudspeaker Glemm - Free user manual and instructions
Find the device manual for free CS 220 Glemm in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive Bookshelf Loudspeaker |
| Brand | Glemm |
| Model | CS 220 |
| Enclosure Type | Bass reflex with front-firing port |
| Frequency Response | 55 Hz - 22 kHz (-3 dB) |
| Nominal Impedance | 8 ohms |
| Sensitivity | 87 dB (2.83 V / 1 m) |
| Power Handling | 20 - 100 W RMS |
| Woofer Driver | 6.5-inch polypropylene cone |
| Tweeter Driver | 1-inch silk dome |
| Dimensions (H x W x D) | 320 x 200 x 260 mm |
| Weight | 5.2 kg per speaker |
| Connections | Gold-plated binding posts |
| Bi-Wiring Support | Yes, via dual binding posts |
| Finish | Black wood grain vinyl |
| Grille | Magnetic detachable cloth grille |
| Placement | Bookshelf or stand-mounted |
| Cleaning | Use a soft, dry cloth; avoid liquids |
| Safety | Do not expose to moisture or direct sunlight |
| Repairability | Replaceable drivers and crossover components |
| Spare Parts Availability | Woofer, tweeter, and crossover kits available |
Frequently Asked Questions - CS 220 Glemm
How should I position the CS 220 speakers for best sound quality?
Place the speakers at ear height when seated, angled slightly toward the listening position. Keep them at least 20 cm from the back wall to allow the bass port to work properly.
Can I use the Glemm CS 220 with a subwoofer?
Yes, the CS 220 can be paired with a subwoofer. Connect the subwoofer to the amplifier's pre-out or speaker-level inputs, and set the crossover around 60-80 Hz for seamless integration.
What amplifier power is recommended for the CS 220?
An amplifier delivering between 20 and 100 watts RMS per channel is ideal, with a nominal impedance of 8 ohms. This provides clean headroom without risking damage.
How do I connect the speaker wires to the binding posts?
Loosen the binding post cap, insert the bare wire or banana plug, then tighten the cap. Ensure the positive terminal (red) is connected to the amplifier's positive output and negative (black) to negative.
Does the CS 220 support bi-wiring or bi-amping?
Yes, the speaker has dual binding posts that allow bi-wiring or bi-amping. Remove the metal jumpers between the posts to use separate runs for the tweeter and woofer.
What is the best way to clean the speakers?
Use a soft, dry microfiber cloth to gently wipe the cabinet and grille. If necessary, vacuum the grille with a low-suction brush attachment. Avoid water, solvents, or polishes.
Can I place the speakers on a desktop near a computer monitor?
Yes, but keep them isolated from the desk to reduce vibrations. Place them on foam pads or stands, and ensure the tweeters are at ear level. Avoid placing them directly in corners to prevent boomy bass.
What should I do if one speaker has no sound?
Check the speaker wire connection at both the amplifier and speaker. Swap the left and right wires to see if the issue follows the speaker or remains on the same channel. Also verify that the amplifier's balance control is centered.
Are spare parts available for the CS 220?
Yes, replacement woofers, tweeters, and crossover boards are available. Contact Glemm customer service or an authorized dealer for the exact replacement parts.
Can I use these speakers outdoors?
The CS 220 is designed for indoor use. Exposure to humidity, extreme temperatures, or direct sunlight can damage the drivers and cabinet. For outdoor listening, use a weatherproof speaker.
User questions about CS 220 Glemm
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual CS 220 - Glemm and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CS 220 by Glemm.