IP-320D - Kitchen Appliances Imarflex - Free user manual and instructions
Find the device manual for free IP-320D Imarflex in PDF.
| Product Type | Hot Water Dispenser (Airpot) |
| Brand | Imarflex |
| Model | IP-320D |
| Capacity | 3.2 Liters |
| Rated Voltage | 230 V a.c., 60 Hz |
| Power Consumption | 750 Watts |
| Water Dispensing | Auto-pump and instant pump |
| Keep Warm Function | Yes (automatic after boiling) |
| Reboil Function | Yes (one-touch reboil button) |
| Indicators | Power/Boil indicator, Keep Warm indicator |
| Lid | Removable for cleaning |
| Steam Vent | Do not cover |
| Cleaning | Descale with vinegar; wash lid with soap; wipe body with damp cloth |
| Safety | Do not immerse in water; do not use with wet hands |
| Usage | Household use only |
| Recommended Descaling | Overnight soak with water and 1/3 vinegar |
| Water Level | Do not fill above maximum level indicator |
| Cord | Replace with same type if damaged |
Frequently Asked Questions - IP-320D Imarflex
User questions about IP-320D Imarflex
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Kitchen Appliances in PDF format for free! Find your manual IP-320D - Imarflex and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IP-320D by Imarflex.
USER MANUAL IP-320D Imarflex
SPECIFICATION
Model No : IP-320D
Rated Voltage : 230Va.c. 60Hz
Power Consumption : 750 Watts
Capacity : 3.2 Liters
IMPORTANT SAFEGUARDS
- Read all instruction thoroughly.
- Check the condition of the unit after taking out from the box. Ensure that all parts are in good condition.
- Before using the unit, check if the voltage indicated corresponds with the convenience outlet (230Va.c.).
- Do not use two-way socket with other appliance.
- Do not use any appliance with a damaged cord or plug. If the cord is damaged, it should be replaced with the same type and size or bring the unit to the nearest authorized service center.
- Do not attempt to repair, adjust or replace parts in the unit, it must be checked and repaired by an authorized lmarflex technician or by a similar qualified person in order to avoid electrical hazard.
- Do not place the unit near gas stove or electric burner.
- Children should be supervised to ensure that they do not play with the appliance.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by person responsible for their safety.
- Do not close or cover the steam vent.
- Do not use the airport other than its intended use.
- Always place the airport in an open area, in order to allow steam to vaporize.
- To prevent electric shock do not operate the unit with wet hands.
- For household use only, not intended for any business purpose.
- Save this instruction manual for future reference.

HOW TO USE
-
Open the lid and pour in water. Do not fill the airport over the full water level indicator.
-
Plug the unit in the convenience outlet (230Va.c.). The Power and Boil indicator will turn ON and the water will start to heat up. If the Boil indicator turns OFF, the Keep Warm indicator will turn ON, it means the airport is in the state of preserving heat. If Reboil button is pressed, Keep Warm Indicator will turn OFF and the Boil indicator will turn ON.
-
To dispense water: 2 water dispensing options to choose from:
a. Auto-pump: for easy water dispensing.
- Place the cup under the spout.
- Press the Dispense button gently. Water will automatically dispense.
b. Instant Pump: for one hand cup/mug dispensing.
-
Place the cup under the spout touching the instant pump switch.
-
Water will automatically dispense.
-
Place the cup under the spout touching the instant pump switch.
- Water will automatically dispense.
CLEANING AND MAINTENANCE
-
Unplug the unit from the convenience outlet. Let it cool and remove any remaining water from the unit.
-
Remove the Lid and wash it with soap and water.
-
Discoloring of water tank:
This is caused by oxidizing of iron content in tap water. It can be removed using nylon brush and by following these simple steps:
a. Fill the airport with water and 1/3 of vinegar up to max level.
b. Let the mixture remain inside the airport for overnight.
c. Discard the mixture and rinse the airport thoroughly.
d. Pour the airport with water and let it boil. Discard the water to remove the odor of the vinegar.
e. Rinse the airport thoroughly.
f. Repeat the procedures "d" and "e" until the odor of the vinegar is completely removed.
-
Do not allow the Control Panel to become wet.
-
Wipe the Body and the Control Panel using damp cloth and wipe it dry.
-
Do not use abrasive materials to avoid scratches.
-
Do not immerse the unit in water or other liquids.