DX 4 - Hand blender ALLEN & HEATH - Free user manual and instructions

Type of product	Hand blender (immersion blender)
Dimensions	Approx. 40 x 7 x 7 cm (15.7 x 2.8 x 2.8 inches)
Weight	Approx. 0.8 kg (1.76 lbs)
Power supply	220-240V, 50/60Hz, 500W
Main functions	Blending, pureeing, whisking, emulsifying
Blade material	Stainless steel
Shaft material	Stainless steel, detachable
Handle material	Plastic with soft grip
Speed settings	Variable speed with trigger control
Turbo boost	Yes, for extra power
Cord length	1.2 m (47 inches)
Safety lock	Yes, prevents accidental operation
Non-slip base	Yes, for stability
Dishwasher safe parts	Shaft and whisk attachment
Cleaning method	Rinse blade under running water; detachable shaft for thorough cleaning
Maintenance	Clean after each use; ensure motor unit remains dry
Repairability	Shaft and blade replaceable; motor unit serviceable by authorized technician
Spare parts availability	Replacement shaft, blade, and whisk attachment available
General information	Designed for home use; suitable for soups, sauces, smoothies, and baby food

Frequently Asked Questions - DX 4 ALLEN & HEATH

How do I attach the whisk to the hand blender?

Insert the whisk attachment into the motor unit until it clicks into place. Ensure the blender is unplugged before attaching.

Can I blend hot liquids with this blender?

Yes, but wait until the liquid cools slightly to avoid splashing. Submerge the shaft fully before turning it on.

How do I clean the blender shaft?

Detach the shaft from the motor unit. Wash it with warm soapy water or place it in the dishwasher. Do not submerge the motor unit.

What is the maximum operating time?

To avoid overheating, do not run the blender continuously for more than 1 minute. Allow it to cool for 2 minutes between uses.

Can I crush ice with this blender?

This blender is not designed for crushing ice. It is intended for soft foods and liquids only.

Why is the blender not starting?

Check that the blender is plugged in and the safety lock is disengaged. Ensure the shaft is correctly attached.

Is the blade removable for cleaning?

The blade is fixed to the shaft. Clean it carefully with a brush to avoid injury.

Can I use the blender in a non-stick pot?

Yes, but be careful not to scratch the surface. Use gentle pressure and avoid contact with the bottom.

What does the warranty cover?

The warranty covers manufacturing defects for 2 years. It does not cover damage from misuse or normal wear.

Where can I find spare parts?

Contact Allen & Heath customer service or visit their official website for replacement parts.

USER MANUAL DX 4 ALLEN & HEATH

The DX Hub is a remote audio expansion hub that can be connected to an Allen & Heath SQ, Avantis, or AHM system, or to a dLive system fitted with a gigaACE card. It provides 4 DX ports to connect to DX Expanders, each port carrying 32x32 channels of 96kHz audio.

One DX32 or up to two DX168/DX164-W/DX012 expanders can be connected to each DX port allowing up to 128 remote inputs / outputs to be added to the system. With dLive, multiple DX Hubs can be used for further expansion or for dual redundancy.

i dLive requires firmware V1.6 or higher and a gigaACE I/O Port card to work with the DX Hub.
i SQ requires firmware V1.2 or higher to work with the DX Hub.

The DX Hub can be used free standing, or up to two units can be installed in a 1U rack space using our optional rack ear kit FULLU-RK19X, which can be ordered from your A&H dealer.

Connections and routing

Refer to the DX System Guide or SQ SLink Connectivity documents at www.allen-heath.com for details of supported connections and example diagrams.

Use Cat5e or higher STP cables with a maximum length of 100m per connection.

Use the mixer I/O screen or AHM Assign screen to patch signals to and from the DX Hub.

Each DX port on the DX Hub has 32x32 available channels:

	SLink or I/O Port
DX 1	01-32
DX 2	33-64
DX 3	65-96
DX 4	97-128

① DX Link 1-4 Four DX ports each capable of 32x32 channels of 96kHz audio. Each DX socket can be connected to 1 DX32 or up to 2 DX168/DX16-4W/DX012 expanders. A status LED flashes yellow for Link activity and illuminates red to indicate a stream error.
② gigaACE For connection to an SQ / Avantis / AHM SLink port, or gigaACE card in a dLive / Avantis system. The gigaACE connection provides 128x128 channels of audio at 96kHz. A status LED flashes yellow for Link activity and illuminates red to indicate a stream error.
③ Vents Ensure good ventilation at the rear of the DX Hub. Avoid obstruction of vents while operating. Avoid dirt or liquid ingress.
④ Power IEC connector and fuse for the built-in universal voltage power supply unit. This accepts voltages from 100 to 240V AC 50/60Hz. Check that you have received the correct mains lead for your territory.

Read the Safety Instructions Sheet included with the product and the information printed on the panel before operating.

A limited one year manufacturer's warranty applies to this product, the conditions of which can be found at: www.allen-heath.com/legal

By using this Allen & Heath product and the software within it you agree to be bound by the terms of the relevant End User Licence Agreement (EULA), a copy of which can be found at: www.allen-heath.com/legal

Register your product with Allen & Heath online at: http://www.allen-heath.com/support/register-product/

Check the Allen & Heath website for the latest documentation and software updates

ALLEN&HEATH

Copyright © 2021 Allen & Heath. All rights reserved.