Blast - Computer Cooling Component Savio - Free user manual and instructions

Product Type	Computer cooling component (CPU cooler)
Brand	Savio
Model	Blast
Dimensions (Fan)	120 x 120 x 25 mm
Overall Dimensions (Heatsink)	130 x 75 x 155 mm
Weight	520 g
Power Supply	DC 12V, 0.2A
Connector	4-pin PWM
Fan Speed (Max)	1800 RPM
Airflow	56 CFM
Noise Level	26 dBA
Material	Aluminum fins, copper heat pipes
Socket Compatibility	Intel LGA 115x/1200/1700, AMD AM4/AM5
Main Function	CPU cooling via heat dissipation and forced air
Maintenance	Clean fan and heatsink with compressed air every 6 months
Safety	Keep cables away from fan blades; ensure secure mounting
Spare Parts	Fan blades, mounting screws, brackets (contact Savio support)
Repairability	Moderate; fan and heat pipes replaceable
Warranty	1 year limited warranty

Frequently Asked Questions - Blast Savio

What CPU sockets does the Savio Blast cooler support?

The Savio Blast supports Intel LGA 115x/1200/1700 and AMD AM4/AM5 sockets.

How do I install the cooler on an AM5 motherboard?

First, remove the default retention bracket. Then attach the provided AMD mounting brackets to the cooler, apply thermal paste, and secure the cooler with screws.

What is the maximum TDP the Blast can handle?

The Savio Blast is designed for CPUs up to 150W TDP under typical usage.

Does the cooler come with pre-applied thermal paste?

Yes, the Savio Blast includes a thermal pad pre-applied on the base. Ensure you peel off the protective cover before installation.

Can the fan speed be controlled?

Yes, the fan uses a 4-pin PWM connector, allowing you to control speed via your motherboard's BIOS or software.

Is the Savio Blast compatible with high-profile RAM?

Yes, the cooler is designed with a single-tower offset design to avoid RAM clearance issues on most motherboards.

How do I clean the cooler?

Unplug the fan connector, then use compressed air to blow dust off the fins and fan blades. For stubborn dirt, use a soft brush.

What should I do if the fan makes noise?

Check if any cables are hitting the blades. If noise persists, the fan bearing may need lubrication or replacement. Contact Savio support for a replacement fan.

Can I replace the fan with a different one?

Yes, the fan is removable using standard 120mm mounting holes. You can replace it with any 120mm fan with a 4-pin PWM connector.

Where can I find the user manual?

The user manual is available for free download at notice-facile.com in PDF format. Search for 'Savio Blast'.

USER MANUAL Blast Savio

Thank you for choosing Savio product!

If our product meets your expectations, share your opinion with other people on the portal ceneo.pl, social media or on the website of the store where you made the purchase. If you want to show our device on SAVIO Facebook Page, we will be very pleased.

If there is something that we could improve on our products, please write to us at [e-mail]

Thanks to your feedback, we will be able to better adapt the product to your expectations.

Before starting the use of purchased device it is recommended to read the whole manual.

1. Technical specification of the fans:

• Fan size: 120 mm
- LED voltage: 5 V
• LED connector: 3-pin (male + female)
- Fan voltage: 12 V
• Fan connector: 4-pin (PWM) (male + female)
- Backlight: ARGB
- Backlight and speed control: Via motherboard
• Max. Speed: 800-1800 RPM
• Max. noise level: 25 dBA

2. Set contents:

• 1 × ARGB fan
  • 4 × screws for mounting the fan

3. Assembly and control:

3.1 Mount the fans in a chosen place inside the PC case, securing them with the screws included in the kit.
3.2 If you have more than one fan. First connect the 12 V and 5 V lines with each other.
3.3 Connect the fan to the 3-pin ARGB 5 V and 4-pin FAN 12 V sockets on the motherboard.
3.4 Backlight control and fan speed can be controlled by dedicated mother-board software.

4. Safety conditions:

• Use the product in accordance with its intended use, as improper use may damage the product.
• Do not expose the device to moisture, heat or sunlight, do not use the product in a dusty environment.
  • The device should be cleaned only with a dry cloth.
• Independent repairs and modification result automatic loss of the warranty.
• Hitting or dropping may damage the product.

Savio

The warranty covers a period of 24 months. Independent repairs and modifications result in automatic loss of the warranty. Warranty card is available for download on our website: www.savio.net.pl/en/service

Gwarancja:

Information of the utilization of electrical and electronic equipment This symbol indicates that electrical appliances should not be discarded with other household waste. Used equipment should be handed over to a local collection point for this type of waste or to a recycling center.

Please contact your local authorities for information about disposal methods available in your area. Waste electrical equipment may contain hazardous substances (e.g. mercury, lead, cadmium, chromium, phthaltes) which can get into air, soil and groundwater when leaking from used appliances. Environmental pollution with these substances leads to their bioaccumulation, causing lesion of disease in living organisms, which would pose a risk to human and animal health or life. Households may contribute to environmental protection by proper waste collection. In such way, hazardous substances from the equipment are neutralized and valuable secondary raw materials are reused for production of new equipment.

Information for customers and contractors and communication regarding complaints: Pursuant to Article 13 section 1 and 2 of the General Data Protection Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp. z o.o., with its registered seat at ul. Morgowa 81; 35-323 Rzeszów becomes the Administrator of your personal data. The Specialist for General Data Protection (SODO) can be contacted in writing to: SODO, Elmak Sp. z o.o., ul. Morgowa 81; 35-323 Rzeszów, via e-mail address: [e-mail], and by phone at +48' (17) 854 98 14. Your personal data will be processed in order to perform the contract, in accordance with Article 6(1)(b) of the aforementioned regulation, to the extent resulting from tax laws and financial regulations. Recipients of your personal data include entities authorized by legal regulations to obtain personal data as well as processing entities providing services to Elmak Sp. z o.o. Your personal data will be stored on the basis of Administrator's legitimate interest. You have the right to access your data, and the right to rectify, delete or limit processing of your data. You have the right to lodge a complaint to the supervisory body if you believe that the processing violates the GDPR. The provision of personal data is voluntary, however, a failure to provide such data may result in a refusal to conclude or in termination of a contract. Your personal data will not be subjected to automated decision making, including profiling referred to in Article 22 section 1 and 4 of the GDPR of April 27, 2016.