SG-2321S - Pepper/Salt Mill Brentwood - Free user manual and instructions

Product Type	Pepper & Salt Mill
Brand	Brentwood
Model	SG-2321S
Dimensions (approx.)	5.5 x 2.2 x 2.2 inches (14 x 5.5 x 5.5 cm)
Weight (approx.)	0.4 lbs (180 g)
Power Source	Battery operated (requires 4 x AA batteries, not included)
Material	Stainless steel and acrylic
Grinding Mechanism	Ceramic rotors (for both pepper and salt)
Coarseness Adjustment	Turn the top knob to adjust from fine to coarse
Operation	Press the button on top to start grinding; press again to stop
Capacity	Holds approximately 0.5 cups (120 ml) of peppercorns or salt
Cleaning	Wipe exterior with damp cloth; do not immerse in water
Battery Life	Approximately 40 hours of continuous use
Auto Shut-off	Automatically turns off after 15 seconds of inactivity
Warranty	1-year limited warranty against manufacturing defects
Spare Parts Availability	Replacement ceramic rotors and battery compartment available
Safety Features	Child-resistant switch; requires two-handed operation
Certifications	CE, RoHS compliant
User Manual Included	Yes, PDF available online

Frequently Asked Questions - SG-2321S Brentwood

How do I adjust the coarseness of the grind?

Turn the top knob clockwise for finer grind, counterclockwise for coarser. Adjust only when the mill is not running.

What type of batteries does the SG-2321S require?

It requires 4 AA batteries (not included). Alkaline batteries are recommended for best performance.

Can I grind both pepper and salt with this mill?

Yes, the ceramic rotors are suitable for both peppercorns and salt crystals. Do not use wet salt as it may cause corrosion.

How do I clean the mill?

Wipe the exterior with a damp cloth. Do not immerse in water or run under the tap. For interior cleaning, empty the chamber and brush gently.

Why is my mill not grinding properly?

Check if batteries are fresh and installed correctly. Also ensure the coarseness setting is appropriate. If still not working, clean the grinding mechanism.

Can I use this mill for other spices?

The mill is designed for pepper and salt only. Other spices may damage the ceramic rotors or have incompatible moisture levels.

How do I refill the mill?

Unscrew the top cap, pour peppercorns or salt into the chamber, and replace the cap. Do not overfill beyond the marked max line.

Is there an auto shut-off feature?

Yes, the mill automatically turns off after 15 seconds of inactivity to conserve battery life.

What should I do if the mill stops working?

First replace the batteries. If still not working, check for jams by emptying the chamber and cleaning. If problem persists, contact Brentwood customer service.

Can I use rechargeable batteries?

Yes, but rechargeable batteries have lower voltage (1.2V vs 1.5V), which may result in reduced grinding performance. We recommend alkaline batteries for optimal use.

USER MANUAL SG-2321S Brentwood

Brentwood ^® Appliances

© 2021 Brentwood Appliances, Inc.

ELECTRIC SALT AND PEPPER MILLS

MOLINOS ELÉCTRICOS DE SAL Y PIMIENTO

ITEM NO.: SG-2321S

Operating and Safety Instructions

When using this appliance always follow basic safety precautions, especially when children are present.

READ ALL INSTRUCTIONS BEFORE USE

WARNING - This is not a toy. Please keep this product away from children.

• This product is not intended for use by children.
- Keep the product out of reach of children and pets.
- Do not leave the product unattended while it is in use.
- Do not immerse the mill base or any part of it in water or any other type of liquid.
- Check the mill for any usable signs of damage, from time to time.
• Before use, clean with soft damp cloth.
- Do not operate the product empty.
- Only use the mill for domestic purposes and as indicated in these instructions.
- This product has no user-serviceable parts. Do not attempt to examine or repair this product yourself. Please review the Warranty Policy on Page 5.
- Alkaline batteries are preferred. NOTE: These mills run on 4 AA/LR6 batteries.

BEFORE USE

FILLING YOUR NEW SALT AND PEPPER MILLS

• Open the battery housing by turning counterclockwise and by raising up, separating the top from the bottom.
• Remove the transparent protective sleeve and place the batteries into the motor with the correct polarity as shown in the housing.
• Place protective sleeve back over the batteries from the top to keep them from falling out during operation.
• Pull out the battery motor and you will find an opening into the spice chamber.
• Fill the spice chamber.
• Carefully connect the battery motor back onto the bottom of the mill. Then lock it in.
• To close the mill, place the top back over the battery motor to fit along with the bottom half.
• Turn clockwise to lock back into starting position

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

USING YOUR SALT AND PEPPER MILLS

• Before seasoning your meals, you can adjust the fineness of the ground pepper or salt by adjusting the wheel on the bottom (underside) of the mills.
• Turn the wheel counterclockwise for a coarser grind or clockwise for a finer grind.
• While holding the pepper and/or salt mill over your meal, push the button located on top of the mill. The light function illuminates what you are seasoning and enables the precise grinding quantity.
• Place the bottom cap back on the mill when finished.

MAINTENANCE AND CLEANING

• Disassemble the different parts of the mill and clean them separately with a damp cloth.
• Do not immerse the mills in liquid or place in a dishwasher.
• Do not use cleaning products or detergents.
• Keep your salt and pepper mills away from heat or dampness.
• Peppercorn Mill Cleaning:

- Pepper has oil and with it comes buildup. When Peppercorn builds up, you must take the grinding mechanism apart. Pay close attention on how you disassemble, so when you reassemble after cleaning, you place parts back as they were. Try not to press on the grinder button while assembling back together. Once you have the four pieces apart, clean the plastic grinding pieces with a soft toothbrush and warm water. You may use a small amount of liquid dish soup. Dry and assemble back together.

- Remove cap, where spice coarseness is adjusted, unscrew coarseness knob by turning counterclockwise. Place the four pieces as they are disassembled in order of removal. Clean as instructed above. Dry and place back in order of removal.

BATTERY & TROUBLESHOOTING

• If your mill is running sluggish or is not properly operating, check batteries.
• Replace with new batteries of the same type and eliminate the old batteries in an environmentally friendly manner.
• If the mill still does not grind, check batteries are installed correctly and are not discharged.
• If the mill gets stuck during use, it will hum. The internal shaft will not turn, and no pepper will grind. Gently tap the mill or shake the mill to remove the stuck salt or pepper.
• Pepper does have oil, if your Peppermill becomes sluggish and has new batteries, it may be time for a cleaning.

- If peppercorn is deeply stuck, detach the top half of the mill along with the battery motor from the bottom as if you were refilling the mill. Turn the adjustment grind setting wheel to its coarseness setting and tap lightly on a hard surface until the stuck peppercorn is released. Use the refill opening as support. Once done, put the mill back together and adjust the coarseness to your desired level.

- If LED light fails to illuminate, issue may be that the bottom half of the mill is not locked in place. Make certain that the bottom half of the Mill is locked by aligning the black arrowhead with the lock silk screen. See Fig. A. Twist the bottom portion clockwise until it clicks.

ONE YEAR LIMITED WARRANTY

Write down the following information about your appliance to better help you obtain assistance or service if you ever need it.

CUSTOMER RECORD

Date of Purchase ____ Store/Dealer ____

Model/Item No: ____

THIS WARRANTY APPLIES TO PRODUCTS PURCHASED AND USED IN THE CONTINENTAL U.S. ONLY. This is the only express warranty for this product and is in lieu of any other warranty or condition. This product is warranted to be free from defects in material and workmanship for a period of one (1) year from the date of original purchase. During this period, your exclusive remedy is repair or replacement of this product, at our option; however, you are responsible for all costs associated with returning the product to us and our returning a product or component under this warranty to you. If the product or component is no longer available, we will replace with a similar one of equal or greater value. This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions, or damage to the product resulting from accident, alteration, abuse, or misuse.

THIS WARRANTY EXTENDS ONLY TO THE ORIGINAL CONSUMER PURCHASER. KEEP THE ORIGINAL SALES RECEIPT, AS PROOF OF PURCHASE IS REQUIRED TO MAKE A WARRANTY CLAIM.

This warranty is void if the product is used for other than single-family household. We exclude all claims for special, incidental, and consequential damages caused by breach of express or implied warranty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you. To make a warranty claim do not return this appliance to the store.

TO OBTAIN WARRANTY SERVICE AND/OR TROUBLESHOOTING INFORMATION:

Call Customer Service at 1-888-903-0060 in the U.S.

Monday through Friday: 9:00am – 5:00pm PST.

Email at [e-mail]

Go online at www.brentwoodus.com

PRECAUCIONES IMPORTANTES

© 2021 Brentwood Appliances, Inc.