LX-6 MKII - Pregnant MISSION - Free user manual and instructions
Find the device manual for free LX-6 MKII MISSION in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Floorstanding Speaker |
| Brand | Mission |
| Model | LX-6 MKII |
| Design | 2.5-way bass reflex |
| Driver Complement | 1x 25mm soft dome tweeter, 2x 165mm polypropylene cone woofers |
| Frequency Response | 35 Hz - 20 kHz (±3 dB) |
| Sensitivity | 88 dB (2.83V @ 1m) |
| Impedance | 8 ohms (minimum 4 ohms) |
| Recommended Amplifier Power | 25 - 150 W RMS |
| Dimensions (H x W x D) | 1000 x 200 x 300 mm (with plinth and spikes) |
| Weight (each) | 20 kg |
| Finishes | Black Ash, Walnut, White (depending on market) |
| Grille | Magnetic, removable cloth grille |
| Bi-wiring / Bi-amping | Dual binding posts with link plates |
| Placement | Free-standing, away from walls for optimal bass |
| Power Source | Passive speaker (requires external amplifier) |
| Cleaning | Wipe with dry soft cloth; do not use solvents |
| Safety Warning | Keep away from moisture and heat sources |
| Spare Parts / Repairability | Contact authorized service center for drivers or crossover |
| Included Accessories | User manual, spike kit, link plates |
Frequently Asked Questions - LX-6 MKII MISSION
How should I position the LX-6 MKII speakers for best sound?
Place the speakers at least 30 cm from the rear wall and 50 cm from side walls. Angle them slightly towards the listening position (toe-in) for optimal imaging. Ensure they are on a stable surface and use the supplied spikes on carpeted floors.
Can I bi-wire or bi-amp the Mission LX-6 MKII?
Yes, the speakers have two pairs of binding posts connected by metal link plates. For bi-wiring, remove the links and run separate speaker cables from the amplifier to the HF and LF terminals. For bi-amping, use two amplifier channels per speaker.
What amplifier power is recommended for the LX-6 MKII?
Mission recommends an amplifier with 25 to 150 watts RMS per channel. The speaker has a sensitivity of 88 dB and 8 ohm nominal impedance, making it compatible with most integrated amplifiers and receivers.
How do I clean the speaker cabinets and grilles?
Wipe the cabinet with a dry, lint-free soft cloth. Do not use any cleaning agents or water. The grille can be gently dusted or cleaned with a vacuum brush attachment. Avoid touching the drive units.
What type of speaker cable should I use?
Use high-quality speaker cable with a cross-section of at least 2.5 mm² (14 AWG) for runs up to 3 meters. For longer runs, use 4 mm² (12 AWG) to minimize resistance. Ensure correct polarity (+ to +, - to -).
Is the LX-6 MKII suitable for home theater use?
Yes, it can be used as front main speakers in a surround sound system. Its full-range response and high power handling make it ideal for both music and movie playback. Pair with a center channel and subwoofer for optimal performance.
How do I install the spikes?
Screw the spikes into the threaded inserts at the base of the speaker. Adjust each spike so the speaker is level and stable. Use the supplied lock nuts to secure them. Place protective floor cups under the spikes if needed.
Can I mount the LX-6 MKII on a wall?
No, the LX-6 MKII is a floorstanding speaker designed to be placed on the floor. It is not wall-mountable. Use the optional floor stands for smaller rooms.
What should I do if a driver is damaged?
Contact an authorized Mission service center for replacement parts. Do not attempt to repair the driver yourself, as it may affect performance and void the warranty. The crossover can also be serviced by a professional.
How to break in the speakers?
Play music at moderate volume for 20-30 hours to allow the suspension components to loosen. This will improve bass extension and overall clarity. Avoid extreme volume during break-in.
User questions about LX-6 MKII MISSION
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual LX-6 MKII - MISSION and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LX-6 MKII by MISSION.