EL192W - Cassette player LG - Free user manual and instructions

Product Type	Cassette Player
Dimensions (approx.)	120 x 80 x 30 mm (4.7 x 3.1 x 1.2 in)
Weight (approx.)	300 g (10.6 oz)
Power Source	2 x AA batteries (not included) or DC 3V adapter
Playback	Standard audio cassettes (Type I, II, IV)
Controls	Play, Stop, Fast Forward, Rewind, Pause, Volume
Output	3.5 mm headphone jack
Recording	Not supported (playback only)
Battery Life (approx.)	Up to 10 hours with alkaline batteries
Maintenance	Clean tape head periodically with cotton swab and isopropyl alcohol
Safety	Keep away from water, magnets, and extreme temperatures
Spare Parts	Replacement belt, head cleaning kit, battery cover (if lost)
Repairability	Simple screw-based disassembly; belt and head replacement possible
Included Accessories	User manual, earphones (may vary)

Frequently Asked Questions - EL192W LG

How do I clean the tape head?

Use a cotton swab lightly moistened with isopropyl alcohol to gently wipe the tape head and pinch roller. Let dry before use.

What batteries does the LG EL192W use?

It uses 2 AA batteries (not included). Alkaline batteries provide longer playtime.

Why is the sound distorted or slow?

Check if batteries are low. Also, the belt may be worn and need replacement. Clean the tape head as well.

Can I record on this cassette player?

No, the LG EL192W is a playback-only model. It cannot record audio.

How long do the batteries last?

With fresh alkaline batteries, expect up to 10 hours of continuous playback.

Can I use an AC adapter?

Yes, it supports a DC 3V adapter (center positive). Use only the specified adapter to avoid damage.

What type of cassettes can I play?

It plays standard audio cassettes, including Type I (normal), Type II (chrome), and Type IV (metal).

The tape won't eject. What should I do?

Gently press the stop/eject button. If stuck, remove batteries and check for obstruction. Do not force the cassette door.

Is there a warranty?

Warranty terms depend on the retailer. LG typically offers a 1-year limited warranty for portable audio devices.

Where can I find replacement belts?

Online stores sell universal cassette player belts. Search for square cut belt suitable for LG portable players.

USER MANUAL EL192W LG

Video Cassette Player

with Line Recording

OWNER'S MANUAL

MODEL: EL192W/EL182W/EL172W

VHS

PAL NTSC

Before connecting, operating, or adjusting this product,

please read this instruction booklet carefully and completely.

Cautions, Contents & Features

Thank you for buying this video cassette player.

Position your VCP so that no bright light or sunlight falls directly onto it. Care should be taken not to expose your VCP to any unnecessary vibration, moisture, dust, or heat.

During electrical storms, it is advisable to unplug both the aerial cable and mains plug to prevent accidental damage to your VCP and TV.

Do not operate your VCP if it is damaged. Your VCP should not be repaired by anyone except qualified service personnel.

Never remove the back cover of your VCP as this can expose you to very high voltage and other hazards. If your VCP does not operate properly, please check the Troubleshooting Guide on page 15. If your VCP still does not operate properly, unplug it and call your dealer.

If the unit is suddenly moved from a cold place to a warm place, do not operate it for two or three hours. Moisture condensation on the head drum, one of the most crucial parts of the unit, will cause damage to the tape. If you experience the above condition, plug the mains lead into an AC outlet, set the POWER switch to ON, and leave at room temperature until moisture condensation disappears.

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

Warning

Precautions, Contents & Features

Controls & Sockets

Connecting to a TV

Tuning in a Video Channel

Remote Control Functions

On Screen Display

Playing a tape

Other Playback Features

Video Doctor

Recording

Dubbing Tapes

Troubleshooting & Specifications

• Super Multi System - PAL, SECAM - B/G D/K - MESECAM, NTSC 3.58/4.43 - NTSC Playback on PAL TV • Long Playback & Recording (LP/EP) • ICON OSD (On Screen Display) • OPR (Optimum Picture Response) (see page 9.) • Video Doctor (Self-Diagnosis) • Line Recording thru AV jack

Each button on your VCP has the same function as its corresponding button on the remote control. (see page 6.) MODEL: EL192W

MODEL: EL182W

MODEL: EL172W

1. Power (ON/OFF)
2. Stop & Tape Eject
3. Cassette Compartment
4. Rewind
5. Play
6. Fast Forward
7. Pause/Still
8. Record
9. Remote Control Sensor
10. Function Indicators
11. System Select (see page 7.)
12. OPR (see page 9.)

Connecting To a TV

If you connect your VCP using the supplied RF Connection Cable (75 Ohms) you will have to tune in a video channel on your TV in order to view video tapes. Further on in the book you will be given guidance on how to tune in your TV.

Make sure all appliances are unplugged from the mains before connecting.

The guidance given on this page is the most common form of connection. However please check with your manufacturer's instruction books for specific information. Make sure all connections are made with both your VCP and additional appliance unplugged from the mains to avoid damaging your equipment. Connecting a VCP using Audio/Video cable is one of the best ways to achieve optimum sound and picture quality from video-tape playback (Recommended). If you own a TV with AV input sockets you will be able to enjoy it; you will be unable to enjoy this facility if you connected just using a normal RF cable.

Back view of your VCP

Your TV receives signals from the video player (VCP) like another TV station.

You have to select a channel number on your TV and tune it in so that you may watch video tapes.

If you connect a monitor or a TV set equipped with AUDIO and VIDEO sockets this adjustment will not

be necessary, simply select the AV mode on your TV.

Make sure that you have correctly installed your VCP as described earlier in this book.

Press POWER to turn on your VCP.

Turn on your TV.

Insert a pre-recorded video tape into your VCP and press PLAY.

Select channel 36 on your TV.

You will then see the picture being played on your VCP.

Store the selected TV channel on your TV. (If you do not know how to do this, refer to the TV instruction book.)

Changing the transmitter channel

If channel 36 is already occupied on your TV set, or if the picture is distorted, or if you want to change the channel for audio output (B/G or D/K), please consult your nearest service center.

On your TV

Video channel

Tuning in a

To watch TV programs, turn off your VCP. When your VCP is on, broadcast reception through the AERIAL socket is not possible.

is on, broadcast reception through the AERIAL socket is not possible.

If you do not intend to use the REMOTE CONTROL HANDSET for a long period of time, remove the batteries, store them in a cool, dry place and out of the reach of children.

Do not use batteries of differing age or type. Always discard batteries safely.

HANDSET for a long period of time, remove the batteries, store them in a cool, dry place and out of the reach of children.

Do not use batteries of differing age or type. Always discard batteries safely.

Battery Installation Your REMOTE CONTROL HANDSET is powered by two AAA type batteries.

Replace the cover.

On Screen Display gives you information about the tape counter and operational mode of your VCP. Some functions of this video player can be set and altered on the TV screen using the remote control with On Screen Display.

MENU OSD

Press MENU / i to display the main menu.

Press ◀ or ▶ to select the desired menu.

Press DISPLAY / OK and press ◀ or ▶ to select the sub menu.

Press MENU / i to remove the menu screen.

FUNCTION OSD

Switches the function OSD ON or OFF. OPR

To improve the playback picture (see page 9). REPEAT

If you want to play back a tape repeatedly, set REPEAT to ON (see page 10).

Dr. To check a problem with your VCP (see page 11).

ABC OSD

To change the language setting for OSD (ENGLISH or RUSSIAN).

SYSTEM

Select the colour system used for playback and recording. You can also set the system by pressing SYSTEM on the front of your VCP. The system is changed as shown below.

Source	Mode	System Change
PAL/MESECAM	Recording	AUTO→PAL→MESECAM
	Playback	AUTO→PAL→MESECAM
NTSC	Recording	NTSC3.58→NTSC4.43
	Playback	NTSC-PB→NTSC3.58→NTSC4.43

FUNCTION OSD

Press DISPLAY/OK to display the function OSD.

① Operating mode ② Colour system ③ OPR mode (see page 9.) ④ Tape counter (hours:minutes:seconds)

Display

On Screen

The tape

counter

changes to

0:00:00 when

the tape is ejected.

The tape counter does not work when the tape is not inserted.

After 3 seconds, the function OSD will automatically disappear.

How to play back a tape

Video Head Cleaning

Dirt accumulating on the head after a long period of time can cause the playback picture to become blurred or broken up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old or damaged tapes might. Clean the video heads with a commercially available video heads cleaning tape.

STILL

Press P/STILL to still a picture.

Tapes can be paused for up to 5 minutes. After 5 minutes your VCP will stop playing the tape to prevent damaging the tape of your VCP.

A still picture will be unstable or will have noise, this is quite normal and doesn't mean that there is anything wrong with your VCP.

Press PLAY to continue playing your tape.

Visual search

Press either FF or REW during playing back. This will enable you to rapidly wind the tape and see where you are on the tape.

Press PLAY to resume normal playback speed.

During visual search PLAY indicator flashes in the display window on the front of your VCP.

Visual search will only continue for about 3 minutes, after which your VCP will return to normal playback. During visual search the sound is muted and there will be some noise streaks on the TV screen.

Press STOP to end playback.

Press EJECT.

The cassette compartment will open and the video cassette will be partially ejected.

If the end of the tape is reached, your VCP will stop playback automatically, rewind, stop, eject the tape, and place itself into STANDBY.

OPR (Optimum Picture Response):

This feature automatically improves playback picture quality by adjusting your VCP to the condition of the tape.

Press MENU / i.

Press ◀ or ▶ to select OPR.

Press OK.

Press ◀ or ▶ to select: OFF, SOFT or SHARP.

Press MENU / i to remove the menus.

Please note you may only set OPR to on when playing a tape.

You can also set the OPR by pressing OPR on the remote control or on the front of your VCP.

Other Playback Features

Repeat playback

If you want to play back a tape repeatedly, set REPEAT to ON.

Press MENU / I.

Press ◀ or ▶ to select REPEAT.

Press DISPLAY / OK.

Press ◀ or ▶ to switch ON or OFF.

Press MENU / i to remove menus from TV screen.

When the end of the tape is reached, VCP automatically rewinds tape to the beginning and repeats playback continuously.

If you want to release this function, set REPEAT to OFF.

Ejecting a tape automatically switches REPEAT to OFF.

Logic search

Hold down FF or REW to watch a picture of tape during fast forward or rewind.

Your VCP switches forward or reverse search. Release the button to return to the fast forward or rewind.

VIDEO DOCTOR (Self-Diagnosis)

This feature informs you that there is a problem with your VCP. These error messages will appear on the TV screen.

Press MENU / i.

Press ◀ or ▶ to select Dr.

Press DISPLAY / OK.

Press ◀ or ▶ to check a problem.

HEAD STATUS

OK

●PLEASE CLEAN :

Clean your video heads.

TAPE STATUS

●RECORDABLE

●NOT RECORDABLE :

Insert a tape with its

protection tab in place.

Press MENU / i to remove menus from TV screen.

(Self - Diagnosis)

Video Doctor

How to record

If you do not wish to record on a tape (this can happen quite easily by accident!) remove the safety tab on the back edge of the video cassette.

It is possible to record on a video cassette with the record protection tab removed by covering the hole with self adhesive tape.

Connect your VCP to a TV as shown below.

Your external aerial must be plugged into your TV.

YOUR VCP

Your VCP allows you to make recordings by connecting to a TV equipped with AUDIO and VIDEO sockets.

Press POWER to turn on your VCP.

Turn on your TV and select the channel you wish to record using the TV's channel selector.

Insert a video cassette with the record protection tab into your VCP.

The video cassette should have the window side facing up and the arrow facing away from you.

Do not attempt to force a cassette into your VCP. There may already be a video cassette in your VCP. You may have the cassette upside down or back to front!

Set the desired recording speed by pressing SPEED.

NTSC colour system: SP or EP; PAL colour system: SP or LP.

Press REC to start recording.

During recording of a TV programme, do not change the TV channel.

your TV.

Press P/STILL to avoid recording unwanted scenes. The REC indicator flashes in the display window.

Press P/STILL again to continue recording.

Tapes can be paused for up to 5 minutes; PAUSE will be displayed when a tape is paused. After 5 minutes your VCP will stop recording to prevent damaging the tape or your VCP.

Press STOP to end recording.

Press EJECT. The cassette compartment will open and the video cassette will be partially ejected.

If the end of the tape is reached, your VCP will stop recording automatically, rewind, stop, eject the tape, and place itself into STANDBY.

Dubbing Tapes

Make sure all connections are made with both your VCP's and Television unplugged from the mains to avoid damaging your equipment.

Connect your VCP to another VCP as shown below.

Press POWER to turn on your VCP.

Insert a pre-recorded source tape into another (playing) VCP.

Insert a blank video tape with the record protection tab into your (recording) VCP.

Simultaneously begin playback on another VCP and record on your VCP.

Press STOP / EJECT to stop recording.

Programmes, films, video cassettes and other materials may infringe the rights of copyright owners and be contrary to copyright laws.

PLAYING VCP

Check the following before calling for service.

No picture & no sound

• Is the mains plug plugged in and switched on?

• Is the TV switched on?

• Have you tuned in a video channel on your TV to watch video tapes on? (see page 5.)

- If you have used an Audio/Video cable to connect your VCP and TV, have you selected the AV mode on your TV?

TV programmes cannot be recorded

Has the external aerial been plugged into your TV? (see page 12 step 1.)

Video cassette cannot be inserted

Is the cassette compartment empty?

Remote control does not work

• Is the mains plug plugged in and switched on? • Is the VCP switched on? - Check the batteries in the remote control.

The top of the playback picture is unstable

• Is the video cassette damaged? Have you tried using another one? • Make sure that you are using a video channel on your TV.

Auto Play does not work

Has the safety tab been removed from the video cassette?

General

Power AC 110-240V, 50/60Hz Power consumption.....Approx. 10 Watts Tape format.....Tape Width 12.7 mm (0.5 inch) Dimensions (W x H x D) .....360 x 94 x 230 mm Weight.....Approx. 3.0 Kg. Operating temperature .....5 - 35°C Operating humidity....Less than 80%.

Video

Television system.....CCIR standard (625 lines,

50 fields), PAL/SECAM colour

signal

Recording format....PAL/MESECAM/NTSC3.58/

NTSC4.43

RF OUT....PAL/SECAM (G or K) Input level....1.0 Vp-p, 75 Ohm, unbalanced Output level.....1.0 Vp-p, 75 Ohm, unbalanced RF modulator ....UHF channels 32-40 (adjustable)

Audio

Input level....-6 dBm, more than 47 kOhms Output level....-6 dBm, less than 1.5 kOhms Audio track ....Mono track Audio frequency response ..100 Hz-10 kHz (-6/+3 dBm)

- Design and specifications are subject to change without notice.

LG Electronics Inc.

P/N: 3834RP0073K