EWAD700T-SSB2 - Air Conditioning DAIKIN - Free user manual and instructions
Find the device manual for free EWAD700T-SSB2 DAIKIN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water-Cooled Chiller |
| Cooling Capacity | 700 kW (238,500 BTU/h) |
| Heating Capacity | 750 kW (optional heat pump model) |
| Energy Efficiency (EER) | 3.2 kW/kW |
| Refrigerant | R134a |
| Compressor Type | Hermetic Scroll |
| Dimensions (L x W x H) | 3000 x 1200 x 2000 mm |
| Weight | 2900 kg |
| Power Supply | 380-415 V, 3-phase, 50/60 Hz |
| Electrical Consumption (Cooling) | 220 kW |
| Sound Pressure Level | 75 dB(A) at 1 m |
| Operating Ambient Temperature | -10°C to 50°C |
| Cooling Water Flow Rate | 120 m³/h |
| Condenser Type | Shell-and-Tube, Water-Cooled |
| Evaporator Type | Flooded Shell-and-Tube |
| Control System | Microprocessor with touchscreen interface |
| Installation Requirements | Indoor only; adequate ventilation and drainage |
| Maintenance Interval | Every 6 months: clean filters; annually: inspect refrigerant |
| Safety Features | High/low pressure cut-out, freeze protection, overload relay |
| Certifications | CE, RoHS, ISO 9001 |
| Warranty | 2 years parts and labor |
Frequently Asked Questions - EWAD700T-SSB2 DAIKIN
What type of refrigerant does the EWAD700T-SSB2 use?
The unit uses R134a refrigerant, which is a common HFC with zero ozone depletion potential.
How often should I perform maintenance on this chiller?
Regular maintenance is recommended every 6 months for filter cleaning, and an annual inspection by a qualified technician is advised to check refrigerant levels and electrical components.
What is the cooling capacity in tons?
The cooling capacity is approximately 200 tons (700 kW) under standard conditions.
Can the unit be used for heating as well?
Yes, if equipped with the optional heat pump module, it can provide heating capacity up to 750 kW. Check your model specifications.
What are the electrical requirements?
The chiller requires a 380-415 V, 3-phase, 50/60 Hz power supply. A dedicated circuit with appropriate overcurrent protection is necessary.
How do I reset the high-pressure alarm?
First, identify and resolve the cause (e.g., blocked condenser). Then, press the reset button on the control panel. If the alarm persists, contact a technician.
What is the recommended water flow rate?
The recommended cooling water flow rate is approximately 120 m³/h for optimal performance.
Where can I find spare parts?
Genuine Daikin spare parts are available through authorized distributors and service centers. Use only Daikin-approved parts to maintain warranty.
What safety features are included?
The unit includes high/low pressure cut-out, freeze protection for the evaporator, and an overload relay to protect the compressor.
Can the unit be installed outdoors?
No, the EWAD700T-SSB2 is designed for indoor installation only. It requires adequate ventilation and a drainage system for condensation.
User questions about EWAD700T-SSB2 DAIKIN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual EWAD700T-SSB2 - DAIKIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EWAD700T-SSB2 by DAIKIN.