VAM250FCVE9 - Heat pump DAIKIN - Free user manual and instructions
Find the device manual for free VAM250FCVE9 DAIKIN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Heat Recovery Ventilator (HRV) / Energy Recovery Ventilator (ERV) |
| Model | VAM250FCVE9 |
| Brand | Daikin |
| Airflow Rate | 250 m³/h (maximum) |
| Heat Recovery Efficiency | Up to 90% (sensible) |
| Dimensions (W×H×D) | Approx. 1050 × 250 × 610 mm (unit only) |
| Weight | Approx. 35 kg |
| Power Supply | 220-240 V, 50/60 Hz, single phase |
| Power Consumption | Max 150 W (without electric heater) |
| Filter Type | Washable pre-filter + optional high-efficiency PM2.5 filter |
| Installation Type | Ceiling-mounted, recessed |
| Duct Connection | Round duct Ø 150 mm (supply and exhaust) |
| Control Interface | Wired remote controller (optional wireless) |
| Operating Temperature Range | -10°C to 40°C (indoor installation) |
| Noise Level | 26 – 38 dB(A) (depending on fan speed) |
| Maintenance | Clean or replace filters every 3-6 months; clean heat exchanger annually |
| Safety Features | Overheat protection, automatic frost protection, filter replacement indicator |
| Warranty | Standard 2 years (may vary by region) |
| Accessories Included | Remote controller, installation template, screws, duct connectors |
Frequently Asked Questions - VAM250FCVE9 DAIKIN
What is the airflow capacity of the Daikin VAM250FCVE9?
The Daikin VAM250FCVE9 has a maximum airflow rate of 250 m³/h. It can be adjusted via the remote controller.
How often should I clean the filters?
Clean the pre-filter every 3 months (more often in dusty environments). Replace high-efficiency filters every 6-12 months or as indicated by the filter replacement light.
Can the VAM250FCVE9 be installed in a cold attic?
The unit is designed for indoor installation only (e.g., ceiling void, laundry room). Operating ambient temperature should be between -10°C and 40°C. For colder attics, ensure proper insulation and freeze protection.
Does the unit come with a remote control?
Yes, the VAM250FCVE9 includes a wired remote controller for basic operation. An optional wireless remote is available.
What is the heat recovery efficiency?
The sensible heat recovery efficiency is up to 90%, meaning most of the heat from exhaust air is transferred to fresh incoming air.
How noisy is the unit during operation?
Noise levels range from 26 dB(A) at low speed to 38 dB(A) at high speed, making it suitable for bedrooms and living areas.
What are the duct sizes required for installation?
The unit uses 150 mm diameter round ducts for both supply and exhaust connections.
Is there an automatic frost protection feature?
Yes, the VAM250FCVE9 has an automatic frost protection function that reduces airflow or activates preheating to prevent ice formation in cold climates.
Can I use a smart thermostat with this unit?
The VAM250FCVE9 can be integrated with third-party controls via Modbus or KNX interfaces (sold separately). Check the installation manual for compatibility.
What maintenance is required for the heat exchanger?
The aluminium heat exchanger should be cleaned annually with a vacuum or mild detergent. Do not use abrasive tools to avoid damaging the fins.
User questions about VAM250FCVE9 DAIKIN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heat pump in PDF format for free! Find your manual VAM250FCVE9 - DAIKIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VAM250FCVE9 by DAIKIN.