GLPC 41 - Saw Gardenline - Free user manual and instructions
Find the device manual for free GLPC 41 Gardenline in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Chainsaw |
| Model | GLPC 41 |
| Brand | Gardenline |
| Power Source | Electric Corded (1200 W) |
| Guide Bar Length | 40 cm (16 inches) |
| Chain Speed | 13.5 m/s |
| Weight | 4.5 kg |
| Dimensions (L x W x H) | 45 x 25 x 25 cm |
| Oil Tank Capacity | 200 ml |
| Chain Brake | Yes, manual |
| Automatic Oiler | Yes |
| Safety Switch | Two-hand safety start |
| Chain Tensioning | Tool-less adjustment |
| Maintenance | Clean after each use; sharpen chain regularly; oil bar and chain |
| Cleaning Instructions | Wipe with dry cloth; do not use water |
| Safety Precautions | Wear goggles and gloves; keep away from children |
| Spare Parts Availability | Replacement chains and guide bars available |
| Repairability | User-replaceable chain, bar, and spark plug (if applicable) |
| Noise Level | 95 dB(A) |
| Vibration Level | 5.0 m/s² |
| Warranty | 2 years |
Frequently Asked Questions - GLPC 41 Gardenline
How do I start the Gardenline GLPC 41 chainsaw?
Ensure the chain brake is disengaged (pull back). Plug into a power outlet. Press the safety lock button and squeeze the throttle trigger. The chainsaw will start.
How do I adjust the chain tension?
Turn the tensioning knob (tool-less) clockwise to tighten or counterclockwise to loosen. The chain should snap back when pulled away from the bar. Never overtighten.
What type of oil should I use for the chain?
Use biodegradable bar and chain oil. Do not use motor oil or recycled oil.
How do I clean the chainsaw after use?
Remove the chain and bar. Clean sawdust from the guide bar groove and oil holes. Wipe the housing with a dry cloth. Do not use water.
What should I do if the chain stops moving during operation?
Release the trigger. Check that the chain brake is not engaged. If the brake is on, pull it back to disengage. Also check chain tension and guide bar alignment.
How often should I sharpen the chain?
Sharpen when the saw cuts slowly or produces fine sawdust. Typically after every 2-3 hours of use. Use a round file of the correct size and follow the original filing angles.
Can I use an extension cord?
Yes, use a heavy-duty outdoor extension cord with a minimum wire size of 14 AWG and a maximum length of 30 meters. Ensure it is rated for outdoor use.
What is the recommended cutting technique?
Always cut with the base of the saw (closest to the motor) to avoid kickback. Use the bumper spike for leverage. Never cut with the tip.
How do I store the chainsaw?
Drain the oil tank. Clean the chain and bar. Apply a light coat of oil to the chain to prevent rust. Store in a dry place away from children.
Where can I buy replacement parts?
Replacement chains and guide bars are available at garden centers or online retailers. Use only genuine parts compatible with the GLPC 41 model.
User questions about GLPC 41 Gardenline
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual GLPC 41 - Gardenline and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GLPC 41 by Gardenline.
