MODE750 - Kitchen sink Caple - Free user manual and instructions

Product Type	Kitchen sink
Brand	Caple
Model	MODE750
Material	Stainless steel (304 grade)
Bowl Configuration	Single bowl
Bowl Length	750 mm
Bowl Width	500 mm
Bowl Depth	200 mm
Overall Dimensions	780 x 530 x 220 mm
Cut-out Dimensions	750 x 500 mm (undermount); 760 x 510 mm (inset)
Weight	12 kg
Finish	Brushed stainless steel
Installation Type	Undermount or inset compatible
Tap Hole	No pre-drilled (optional)
Drain Hole	Standard 3.5 inch (89 mm)
Included Accessories	Drain kit, basket strainer
Noise Insulation	Yes, sound-deadening pads
Warranty	2 years
Care Instructions	Clean with mild soap and water; avoid abrasive cleaners or chlorine bleach
Safety	Use caution with hot items; do not stand or apply excessive weight

Frequently Asked Questions - MODE750 Caple

How to install the Caple MODE750 sink?

Installation should be performed by a qualified professional. The sink can be installed as undermount or inset. For undermount, cut the countertop to 750 x 500 mm; for inset, cut to 760 x 510 mm. Secure using provided clips and seal with silicone.

What material is the sink made of?

The Caple MODE750 is made from premium 304 grade stainless steel, which is durable, corrosion-resistant, and easy to maintain.

Does the sink come with a drain kit?

Yes, the sink includes a drain kit and a basket strainer for basic setup. Additional plumbing components may be required depending on your installation.

What is the weight capacity of the sink?

The sink is designed to withstand normal kitchen use. To avoid damage, do not apply excessive weight or stand inside the sink. The maximum recommended load is approximately 50 kg distributed evenly.

Can I install a garbage disposal unit?

Yes, the sink is compatible with most standard garbage disposal units. Ensure the disposal flange fits the 3.5-inch drain hole. Consult a plumber for proper installation.

How do I clean and maintain the sink?

Clean regularly with mild soap and water. Avoid abrasive cleaners, steel wool, or chlorine bleach to prevent scratching and staining. Rinse thoroughly and dry with a soft cloth.

Is the sink suitable for undermount installation?

Absolutely, the Caple MODE750 is designed for both undermount and inset installations. For undermount, the cut-out must be precisely 750 x 500 mm to ensure a seamless fit.

What are the exact cut-out dimensions?

For undermount installation, cut-out dimensions are 750 mm x 500 mm. For inset installation, the cut-out should be 760 mm x 510 mm. Always verify with the template provided.

How to remove scratches from the sink?

Minor surface scratches can be polished out using a stainless steel cleaner and a soft cloth. For deeper scratches, use a fine-grit abrasive pad (e.g., 400-600 grit) and rub in the direction of the grain.

What warranty does Caple offer?

Caple provides a 2-year warranty covering manufacturing defects. Registration may be required. Proof of purchase is necessary for claims.

USER MANUAL MODE750 Caple

BOWL DEPTH: 200MM

MIN. BASE UNIT: 800MM

INSET CUT-OUT SIZE: 736 X 426MM

NOTE: For cut-out shape go to www.caple.co.uk for template