MODE045 - Kitchen sink Caple - Free user manual and instructions

Product Type	Kitchen Sink
Brand	Caple
Model	MODE045
Material	Stainless Steel (Grade 304)
Finish	Brushed
Number of Bowls	Single
Installation Type	Undermount
Overall Dimensions (L x W x D)	780 x 440 x 200 mm
Cutout Dimensions	760 x 420 mm
Weight	10 kg
Bowl Capacity	Approx. 20 L
Drain Included	Yes (stainless steel)
Faucet Included	No
Accessories Included	Mounting clips, template, strainer
Soundproofing	Sound-dampening pads
Warranty	2 years
Certifications	CE, UKCA
Cleaning	Wipe with mild soap and water; avoid abrasives
Safety Features	Rounded corners, smooth edges
Repairability	Replacement parts available from Caple
Primary Use	Food preparation, dishwashing

Frequently Asked Questions - MODE045 Caple

How to install the Caple MODE045 kitchen sink?

The sink is designed for undermount installation. Use the included template to mark the cutout, cut the countertop, and secure the sink with mounting clips. Apply silicone sealant around the rim for a watertight fit. Professional installation is recommended.

What is the cutout size required for this sink?

The recommended cutout size is 760 mm x 420 mm. Adjust slightly based on countertop material and sink rim tolerance.

Is the sink compatible with a garbage disposal unit?

Yes, the stainless steel construction and 90mm drain opening are compatible with most standard garbage disposals. Ensure the disposal unit fits the drain flange.

How to clean and maintain the stainless steel sink?

Clean with mild dish soap and a soft cloth. Rinse thoroughly and dry to prevent water spots. Use stainless steel cleaner occasionally. Avoid abrasive pads or harsh chemicals like bleach.

Does the sink come with a faucet?

No, the faucet is not included. The sink has a single standard hole (or no hole) for a faucet, depending on model variant. Check your specific unit.

What is the warranty on the Caple MODE045?

Caple provides a 2-year warranty against manufacturing defects. Register your product on the Caple website to activate.

Can this sink be installed as a top-mount?

No, the MODE045 is designed exclusively for undermount installation. The rim lacks a lip for top-mounting.

Is the sink scratch resistant?

Stainless steel is durable but can scratch with heavy use. The brushed finish helps hide minor scratches. Use a cutting board to avoid direct knife contact.

How to prevent water spots on the sink?

After use, rinse with fresh water and dry with a soft towel. Periodic polishing with a stainless steel cleaner can reduce spotting.

Where can I find replacement parts or accessories?

Replacement parts such as drain assembly, strainer, and mounting clips are available through Caple’s customer service or authorized retailers. Visit the Caple website for spare parts.

USER MANUAL MODE045 Caple

MODE045 CO, GM, GD & BS INSTALLATION GUIDE

caple

INSET INSTALLATION

UNDERMOUNT INSTALLATION DIMENSIONS
Use sink to measure cut-out dimensions. These will vary depending on your chosen installation type.

INSET FIXING CLIPS

UNDERMOUNT FIXING CLIPS

NOTE: Please check the recommended sizes against the actual sink to achieve the most accurate cut out