Impact 502 U85-TN-Be - Vacuum Cleaner VAX - Free user manual and instructions
Find the device manual for free Impact 502 U85-TN-Be VAX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cylinder Vacuum Cleaner |
| Brand | VAX |
| Model | Impact 502 U85-TN-Be |
| Color | Blue/White |
| Dimensions (LxWxH) | 40 x 30 x 30 cm |
| Weight | 5.5 kg |
| Power Consumption | 1200 W |
| Dust Container Capacity | 1.5 L |
| Bag Type | Bagless Cyclonic |
| Cord Length | 8 m |
| Noise Level | 78 dB |
| Filtration System | HEPA Washable Filter |
| Attachments Included | Crevice Tool, Upholstery Tool, Floor Nozzle |
| Energy Efficiency Class | A |
| Warranty | 2 Years |
Frequently Asked Questions - Impact 502 U85-TN-Be VAX
How do I clean the HEPA filter on my Vax Impact 502?
The HEPA filter can be washed under cold running water. Allow it to dry completely for 24 hours before reinstalling. Do not use detergent or heat to dry.
My Vax Impact 502 has lost suction. What should I check?
Check if the dust container is full, the filters are clogged, or there is a blockage in the hose or floor head. Empty the container, wash the filters, and clear any obstructions.
How do I empty the dust container?
Press the release button to remove the container, then open the bottom flap over a bin. Tap the container to remove dust. Wash with water if needed and dry completely.
Can I use the vacuum without the HEPA filter?
No, the vacuum must always be used with the HEPA filter installed to protect the motor and maintain air quality. Operating without can cause damage.
How often should I replace the belt on my Vax Impact 502?
Replace the belt every 6-12 months or when the brush roller stops spinning. Visible wear or breakage indicates it's time for a new belt.
The brush roller is not turning. What's wrong?
Check if the belt is broken or stretched, or if hair/debris is tangled around the roller. Turn off and unplug, then remove obstructions and replace the belt if needed.
How do I wash the pre-motor filter?
Remove the pre-motor filter from the dust container. Wash under cold water without soap, wring gently, and let air dry for 24 hours before reinserting.
What is the correct way to store the vacuum?
Store the vacuum in a dry place with the cord wrapped around the cord clips. Keep the hose and attachments in a safe spot to avoid damage.
Why does the vacuum smell while in use?
A musty smell indicates a wet filter or debris in the dust container. Empty and dry all components. If it smells like burning, turn off immediately and check for blockages or a stuck brush roller.
Where can I buy replacement parts for the Vax Impact 502?
Replacement parts like filters, belts, and accessories are available directly from VAX's official website or authorized retailers. Check your manual for part numbers.
User questions about Impact 502 U85-TN-Be VAX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual Impact 502 U85-TN-Be - VAX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Impact 502 U85-TN-Be by VAX.