Impact 502 U86-IN-Pe - Vacuum Cleaner VAX - Free user manual and instructions
Find the device manual for free Impact 502 U86-IN-Pe VAX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Vax |
| Model | Impact 502 U86-IN-Pe |
| Product Type | Upright Vacuum Cleaner |
| Dimensions (L x W x H) | 45 x 30 x 110 cm |
| Weight | 5.5 kg |
| Power Supply | Corded Electric, 230V ~ 50Hz |
| Rated Power | 800 W |
| Suction Power | 250 Air Watts |
| Dust Capacity | 2.5 L (Bagless) |
| Filtration System | HEPA 12 Washable Filter |
| Cleaning Path Width | 30 cm |
| Cord Length | 8 m |
| Reach (with hose & tools) | 12 m |
| Noise Level | 78 dB (A) |
| Attachments Included | Crevice tool, dusting brush, upholstery tool, turbo brush |
| Maintenance | Regularly clean and replace HEPA filter, empty dust container after each use |
| Repairability Index | 8/10 (Spare parts available online) |
| Warranty | 2 years against manufacturing defects |
Frequently Asked Questions - Impact 502 U86-IN-Pe VAX
How do I empty the dust container on the Vax Impact 502?
To empty the dust container, press the release button on the top of the canister, lift it out, and open the bottom flap over a trash bin. Rinse the container with water if needed and let it dry completely before reinserting.
How often should I clean the HEPA filter?
The HEPA filter should be cleaned every 3-4 months or when the suction drops. Tap it gently over a trash bin to remove dust, or wash it with cold water and let it dry for 24 hours before reinserting.
What should I do if the vacuum cleaner loses suction?
Check the dust container for fullness, clean or replace the HEPA filter, and inspect the hose and brush bar for blockages. Also ensure the brush roll is not tangled with hair or fibers.
Can I use the Vax Impact 502 on hardwood floors?
Yes, but use the hard floor setting (if available) or turn off the brush bar to avoid scratching. Alternatively, use the included soft dusting brush attachment.
How do I remove the brush bar for cleaning?
Turn off and unplug the vacuum. Press the release tabs on the brush bar cover to remove it, then lift the brush bar out. Cut away any tangled hair or threads with scissors.
My vacuum overheats and shuts off. What should I do?
Overheating can be caused by a blocked filter or full dust container. Turn off the vacuum, unplug it, and let it cool for at least 30 minutes. Clean the filter and empty the container before restarting.
Where can I find spare parts for the Vax Impact 502?
Spare parts such as filters, brush bars, and belts are available on the Vax official website or through authorized retailers. Use the model number Impact 502 U86-IN-Pe to find compatible parts.
How do I use the turbo brush attachment?
Attach the turbo brush to the hose or wand. It uses air suction to spin the brush, ideal for removing pet hair from upholstery and stairs. Hold it at a slight angle and move slowly over the surface.
What is the warranty period and does it cover accidental damage?
The Vax Impact 502 comes with a 2-year warranty against manufacturing defects. It does not cover accidental damage or normal wear and tear. Register your product online to activate the warranty.
Can I use the vacuum without the dust container?
No, the dust container must always be in place for proper airflow and filtration. Operating without it can damage the motor and release dust back into the air.
User questions about Impact 502 U86-IN-Pe VAX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual Impact 502 U86-IN-Pe - VAX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Impact 502 U86-IN-Pe by VAX.