Full-Drive FD1 - Guitar amplifier Fulltone - Free user manual and instructions
Find the device manual for free Full-Drive FD1 Fulltone in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Guitar Overdrive & Distortion Pedal |
| Dimensions (W x D x H) | 4.5 x 2.5 x 1.5 inches (114 x 64 x 38 mm) |
| Weight | 0.5 lb (0.23 kg) |
| Power Supply | 9V DC negative center (Boss-style adapter) or 9V battery |
| Current Draw | Approximately 20 mA |
| Input Impedance | 1 MΩ |
| Output Impedance | 100 kΩ |
| Bypass Type | True Bypass (mechanical relay) |
| Controls | Volume, Tone, Overdrive, Distortion, Boost (toggle switch), Series/Parallel switch |
| Modes | Overdrive, Distortion, Boost (separate or combined) |
| LED Indicator | Red power LED when engaged |
| Construction | Aluminum chassis with durable powder-coat finish |
| Input Jack | 1/4" TS (mono) |
| Output Jack | 1/4" TS (mono) |
| Battery Type | 9V alkaline (not included) |
| Battery Life | Approximately 100 hours with alkaline battery |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Included Accessories | None (pedal only) |
| Maintenance | Clean with dry cloth; avoid liquids; replace battery when low |
| Safety Warning | Do not use in wet environments; unplug when not in use for extended periods |
| Spare Parts / Repairability | Contact Fulltone for service; typical components (pots, jacks, switch) are user-serviceable |
| Warranty | 5 years limited warranty (check with manufacturer for details) |
Frequently Asked Questions - Full-Drive FD1 Fulltone
How do I power the Full-Drive FD1?
You can power it using a standard 9V battery (alkaline recommended) or a 9V DC adapter with negative center tip (2.1mm, Boss-style). Do not use adapters above 9V.
Is the FD1 true bypass?
Yes, the Full-Drive FD1 features true bypass via a mechanical relay, ensuring your guitar signal remains unaffected when the pedal is off.
What do the controls do?
Volume sets output level, Tone adjusts treble/bass, Overdrive controls gain of the overdrive circuit, Distortion controls gain of the distortion circuit. The Boost toggle adds extra gain/volume, and the Series/Parallel switch selects how the two channels interact.
Can I use the boost on its own?
Yes, the boost can be activated independently without overdrive or distortion, by setting the mode switch to Boost only (check manual for exact setting).
What is the difference between Series and Parallel mode?
In Series mode, overdrive and distortion stack in series for more saturation. In Parallel mode, they are mixed in parallel for a blended tone with less compression.
How long does the battery last?
With a fresh 9V alkaline battery, you can expect about 100 hours of continuous use. Unplug the input jack when not in use to avoid draining the battery.
What type of power adapter should I use?
Use a regulated 9V DC adapter with negative center polarity, minimum 100 mA current capacity. Standard Boss-style adapters work perfectly.
Does the FD1 work with bass guitar?
Yes, it can be used with bass, but it's optimized for electric guitar. The tone control may need adjustment to retain low-end.
How do I clean the pedal?
Use a soft, dry cloth to wipe the chassis. Avoid using liquids or cleaners as they may damage the finish or electronics. Keep the jacks and switch free of dust.
What is the warranty coverage?
Fulltone offers a 5-year limited warranty against defects in materials and workmanship. Keep your proof of purchase for service requests.
User questions about Full-Drive FD1 Fulltone
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Guitar amplifier in PDF format for free! Find your manual Full-Drive FD1 - Fulltone and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Full-Drive FD1 by Fulltone.