V3FC90SS - Range hood Viali - Free user manual and instructions
Find the device manual for free V3FC90SS Viali in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Viali |
| Model | V3FC90SS |
| Width | 90 cm |
| Depth | 50 cm |
| Height | 60 cm (adjustable) |
| Weight | 15 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Maximum Power Consumption | 220 W |
| Motor Power | 180 W |
| Number of Motors | 1 |
| Suction Capacity (Max) | 650 m³/h |
| Noise Level (Max) | 62 dB(A) |
| Lighting | 2 x 20 W halogen lamps |
| Filter Type | Aluminum grease filter (washable) |
| Carbon Filter | Optional (recirculation mode) |
| Controls | Electronic push buttons with 3 speeds |
| Exhaust Outlet Diameter | 150 mm |
| Installation Type | Wall-mounted or Recirculation |
| Maintenance | Clean grease filter monthly; replace carbon filter every 3-6 months |
| Safety Features | Automatic shutdown if overheated; thermal motor protection |
| Spare Parts | Grease filter, carbon filter, halogen lamps available |
Frequently Asked Questions - V3FC90SS Viali
How do I install the Viali V3FC90SS range hood?
The hood can be wall-mounted or used in recirculation mode. Ensure the wall is strong enough to support the weight. Use the included mounting bracket and follow the installation diagram in the manual. For ducted installation, connect the exhaust hose to a 150 mm outlet. For recirculation, install the optional carbon filter.
How often should I clean the grease filter?
It is recommended to clean the aluminum grease filter once a month to maintain performance. Wash it by hand in warm water with mild detergent or in the dishwasher (lowest temperature).
Can I use the hood without a carbon filter?
Yes, the hood works without a carbon filter in ducted mode. The carbon filter is only needed for recirculation mode to remove odors.
How do I replace the halogen lamps?
Switch off power to the hood. Remove the lamp cover by prying it gently. Press the halogen bulb (20 W, G4 base) slightly and turn counterclockwise to remove. Insert a new bulb by pushing in and turning clockwise. Replace the cover.
What should I do if the hood is not sucking properly?
Check if the grease filter is clogged and clean it. Ensure the exhaust duct is not kinked or blocked. Verify that the fan speed is set to a higher setting. If the problem persists, check the motor or call service.
Is the hood noisy?
The noise level is up to 62 dB(A) at maximum speed, which is normal for this type of appliance. Lower speeds are quieter. Regular filter cleaning helps reduce noise.
Can I vent the hood into the attic?
No, the exhaust must be vented outside or into a chimney flue (if local codes allow). Venting into an attic or enclosed space is unsafe and may cause moisture problems.
How do I reset the hood after a power failure?
After a power outage, the hood will operate normally once power is restored. If the thermal safety has tripped due to overheating, wait for the motor to cool down. Press any button to reset.
What type of carbon filter does this model use?
The V3FC90SS uses a rectangular carbon filter (typically size 24x22 cm). It should be replaced every 3-6 months depending on usage.
Where can I find spare parts?
Spare parts like grease filters, carbon filters, and lamps are available from Viali authorized dealers or online. Use the model number V3FC90SS to search for compatible parts.
User questions about V3FC90SS Viali
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual V3FC90SS - Viali and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. V3FC90SS by Viali.