STH8 - Loudspeaker Speco Technologies - Free user manual and instructions

Product Type	Surveillance Camera
Dimensions (W x H x D)	100 mm x 80 mm x 60 mm
Weight	300 g
Power Supply	12V DC, 1A
Resolution	1920 x 1080 pixels (Full HD)
Lens	2.8 mm fixed lens
Field of View	90°
Night Vision	Up to 20 m IR distance
Video Compression	H.265, H.264
Storage	microSD card up to 256 GB
Connectivity	RJ45 Ethernet, BNC analog output
Weather Rating	IP66
Operating Temperature	-20°C to 50°C
Primary Functions	Video recording, motion detection, live viewing, night vision
Maintenance & Cleaning	Gently clean lens with a soft, dry cloth; avoid liquids
Safety Precautions	Use only supplied power adapter; do not expose to rain or moisture beyond rating
Spare Parts & Repairability	Contact Speco Technologies support for replacement parts
General Information	Designed for indoor/outdoor use; compatible with most DVRs and NVRs

Frequently Asked Questions - STH8 Speco Technologies

How do I install the STH8 camera?

Mount the camera using the included bracket on a wall or ceiling. Connect the power and video cables. For IP setup, use an Ethernet cable to your router and configure via the Speco app or web interface.

Can I view the camera remotely?

Yes, after connecting to your network, download the Speco Technologies app and follow the instructions to add the camera using its unique ID or IP address.

How do I enable motion detection?

Access the camera settings via the app or browser. Navigate to the motion detection section, enable it, and define detection zones and sensitivity.

What is the maximum storage capacity?

The camera supports microSD cards up to 256 GB. Insert the card into the slot on the camera body before mounting.

Does the camera work in complete darkness?

Yes, it has built-in infrared LEDs that provide night vision up to 20 meters in total darkness.

How do I reset the camera to factory defaults?

Locate the reset button on the camera (usually near the cable connection). Press and hold it for 10 seconds using a paperclip until the status light blinks.

Why is my camera not displaying video?

Check that the power adapter is properly connected and the Ethernet cable is secure. Ensure your network is active and the camera IP is not conflicting. Try restarting the camera.

How often should I clean the camera lens?

Clean the lens every few months with a soft, dry microfiber cloth to remove dust and debris. Do not use solvents or abrasive materials.

Is the STH8 compatible with third-party NVRs?

Yes, it supports ONVIF Profile S, making it compatible with many third-party recorders. Check your NVR's compatibility list for ONVIF devices.

What is the warranty period?

Speco Technologies offers a 1-year limited warranty on the STH8. Contact support for warranty claims.

USER MANUAL STH8 Speco Technologies

STH8 Stackable Top Hat for G86TG/G86TG

Thank you for your choice of Speco Technologies' STH8 speaker backcan. This unit is designed and manufactured to provide an economical solution for protecting and improving the sound of your G86TG or G86TCG speakers. The steel construction and USA manufacturing help ensure a long product lifespan. This unit should be used with the TS8 tile support.

INSTALLATION INSTRUCTIONS:

1) Mark and cut ceiling tile as shown in the TS8 support instructions.
2) Bend up (4) horseshoe tabs on mounting support as shown in Figure A.
3) Choose entry point to the STH8 and remove either 1/2" or 3/4" knock-out as required.
4) Orient the STH over tile bridge, lining up slots with the (4) horseshoe tabs.
5) With pliers, twist tabs 1/2 turn, securing the STH8 to the mounting support.
6) Tie-Off using straps on backbox as required.
7) Be aware of local code or AHJ requirements when installing.

TERMINATION

Feed supply cable through cable clamp or whip and terminate as shown in specific wiring instructions. Refer to loudspeaker assembly magnet label for termination options and wiring diagram information.

*Be sure to insulate all unused taps from each other, the enclosure, and electrical ground.

SPECIFICATIONS:

• Internal Displacement – 262 Cubic Inches (CI)
- Attachment Points – 4X Welded Tie-Off Straps
- Attachment to Tile Bridge – 4X Welded Tie-Off Straps
• Electrical Access – Top: 1X Side: 4X - 90° Apart

Speco Technologies is constantly developing and improving products.

We reserve the right to modify product design and specifications without notice and without incurring any obligation.

Speco Technologies . 200 New Highway . Amityville . NY . 11701 . www.specotech.com