Speco Technologies

SPCBC5 - Loudspeaker Speco Technologies - Free user manual and instructions

Find the device manual for free SPCBC5 Speco Technologies in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Speco Technologies SPCBC5 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Ceiling Loudspeaker
Brand Name Speco Technologies
Model Number SPCBC5
Speaker Size 5.25 inches
Impedance 8 ohms
Frequency Range 70 Hz - 20 kHz
Power Rating 20 W RMS, 40 W peak
Transformer Taps 70V/100V with selectable power taps
Sensitivity 90 dB
Mounting Type Ceiling recessed
Cutout Diameter 7.2 inches
Dimensions 8.5 inches diameter x 4.5 inches depth
Weight 1.5 kg
Material Steel backcan, plastic grille
Color White
Connection Type Screw terminal block
Included Accessories Mounting clamps, cutout template
Safety Features Heat-resistant transformer, insulated terminals
Maintenance Clean with a soft dry cloth
Repairability Grille and transformer replaceable
Warranty 1 year limited

Frequently Asked Questions - SPCBC5 Speco Technologies

How do I install the SPCBC5 ceiling speaker?
Install the SPCBC5 by cutting a hole of the required diameter, typically 7.2 inches. Insert the speaker and tighten the mounting clamps. Connect the speaker wires to the terminal block, then secure the grille.
What is the impedance rating of this speaker?
The SPCBC5 has a nominal impedance of 8 ohms. It also includes a line transformer for 70V or 100V systems.
Can this speaker be used with a 70V or 100V commercial sound system?
Yes. The built-in transformer supports both 70V and 100V distributed audio lines. Select the appropriate tap for your wattage requirement.
How do I connect the speaker wires?
Strip the wire ends and connect them to the spring-loaded or screw-type terminals. Ensure polarity is consistent (positive to +, negative to -) for proper sound.
What is the power handling capacity?
The speaker handles up to 20W RMS and 40W peak. When used with a transformer, choose the tap matching your amplifier output.
How should I clean and maintain the loudspeaker?
Use a soft dry cloth to wipe the grille and housing. Avoid solvents or water that could damage the crossover or cone.
Is the grille paintable to match any decor?
Yes, the grille can be painted with water-based paint. Remove the grille, clean it, and apply thin coats to avoid clogging the perforations.
What is the recommended ceiling cutout size?
The recommended cutout diameter is 7.2 inches (183 mm). This allows the dog ears to clamp properly.
The speaker makes no sound. What should I check?
First ensure the amplifier is powered and the wires are connected tightly. Check the transformer tap to confirm it matches your system voltage. Also verify that the volume is not turned down.
Can I replace the grille or internal parts if damaged?
Yes, the grille and transformer are replaceable. Contact Speco Technologies for spare parts. This improves the repairability of the speaker.

User questions about SPCBC5 Speco Technologies

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Loudspeaker in PDF format for free! Find your manual SPCBC5 - Speco Technologies and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SPCBC5 by Speco Technologies.

USER MANUAL SPCBC5 Speco Technologies

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Speco Technologies

Model : SPCBC5

Category : Loudspeaker