HL-3150CDN - Printer BROTHER - Free user manual and instructions
Find the device manual for free HL-3150CDN BROTHER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Color Laser Printer |
| Print Technology | Laser |
| Print Speed (Black) | Up to 22 ppm |
| Print Speed (Color) | Up to 22 ppm |
| Print Resolution | Up to 2400 x 600 dpi |
| Duplex Printing | Automatic |
| Network Ready | Yes (Ethernet) |
| Paper Input Tray Capacity | 250 sheets |
| Memory | 128 MB |
| Display | 2-line LCD |
| Dimensions (W x D x H) | 410 x 470 x 325 mm |
| Weight | 21.2 kg |
| Power Consumption (Printing) | 480 W |
| Power Consumption (Standby) | 55 W |
| Monthly Duty Cycle | Up to 30,000 pages |
| Consumables | Toner cartridges (TN-221 series), Drum unit (DR-2200) |
| Interfaces | USB 2.0, Ethernet |
| Warranty | 1 year limited |
Frequently Asked Questions - HL-3150CDN BROTHER
How do I set up the Brother HL-3150CDN for the first time?
Remove all packaging, install the four toner cartridges and drum unit, load paper into the tray, connect the power cable, and turn on the printer. Follow the on-screen instructions or refer to the quick setup guide.
How can I connect the HL-3150CDN to a wireless network?
The HL-3150CDN does not support Wi-Fi; it requires a wired Ethernet connection. Plug an Ethernet cable into the printer and your router, then configure the IP address via the printer menu or DHCP.
What should I do if the printer shows a paper jam?
Open the front cover, remove the drum unit and toner cartridges, and gently pull out any jammed paper. Check the rear exit as well. Close the cover and press Go to resume.
How do I replace the toner cartridge?
Open the front cover, remove the drum unit, push down the green lock lever and pull out the old toner. Insert a new TN-221 series toner, lock it, and reinstall the drum unit. Close the cover.
Why are my prints faded or streaky?
Check toner levels and replace low cartridges. Run a drum cleaning from the machine menu. If problem persists, the drum unit may need replacement.
How do I enable automatic duplex printing?
In the printer driver properties, select 2-Sided Print and choose either 'Long Edge' or 'Short Edge' binding. The printer will automatically print on both sides.
How can I reset the drum counter after replacing the drum unit?
Press Menu, then navigate to 'Machine Info' > 'Reset Drum'. Select Yes to confirm. The drum counter will reset to full.
What driver do I need for Windows 10?
Download the full driver package from Brother's support website for Windows 10 (32/64-bit). Install using the Add Printer wizard or run the installer.
How do I print from a mobile device?
The HL-3150CDN does not support mobile printing directly. Use a computer with the printer installed or connect via AirPrint if using a Mac/iOS on the same network.
What is the recommended maintenance schedule?
Replace toner as needed. Replace the drum unit approximately every 15,000 pages. Clean the corona wires and scanner glass periodically. Refer to the manual for detailed maintenance procedures.
User questions about HL-3150CDN BROTHER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual HL-3150CDN - BROTHER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HL-3150CDN by BROTHER.