LS2670 - Epilator DCG - Free user manual and instructions

Product Type	Epilator
Brand	DCG
Model	LS2670
Power Source	Rechargeable Lithium-Ion Battery
Battery Voltage	3.7 V
Charging Time	Approx. 2 hours
Operating Time	Up to 45 minutes
Tweezer Count	18 tweezers
Speed Settings	2
Pivoting Head	Yes
Wet/Dry Use	Wet & Dry
Dimensions (approx.)	15 x 5 x 5 cm
Weight	200 g
Included Accessories	Charging cable, cleaning brush, protective cap
Cleaning Method	Clean with included brush under running water
Safety Features	Anti-slip handle, automatic shut-off
Repairability	Non-repairable; spare parts not available
Warranty	2 years

Frequently Asked Questions - LS2670 DCG

How do I charge the DCG LS2670 epilator?

Connect the included charging cable to the epilator and a USB power source. The indicator light shows charging status. Full charge takes about 2 hours.

Can I use the LS2670 in the shower?

Yes, the LS2670 is designed for wet and dry use. You can use it in the shower or bath for a more comfortable epilation experience.

How often should I clean the epilator head?

Clean the epilator head after each use to maintain hygiene and performance. Use the provided brush to remove hair and debris, and rinse under water if used wet.

What should I do if the epilator stops working?

First, check if the battery is charged. If the device still doesn't work, try resetting it by plugging it into the charger. If the problem persists, contact DCG customer support.

Is the LS2670 suitable for facial hair?

The LS2670 is primarily designed for body hair removal. For facial hair, use the included precision cap or consider a model specifically for facial use. Avoid using on sensitive areas like eyebrows.

How long does the battery last on a full charge?

A full charge provides up to 45 minutes of cordless use. This is sufficient for multiple sessions depending on the area being treated.

Can I replace the epilator head or tweezers?

No, the epilator head is not replaceable. The device is designed for the lifetime of the epilator head. Spare parts are not available separately.

Is it normal for the epilator to get warm during use?

Yes, slight warming is normal due to the motor and friction. If it becomes too hot, stop use and let it cool down. The device has automatic shut-off for safety.

What is the best technique for epilation?

Hold the epilator at a 90-degree angle to the skin and stretch the skin taut. Move the epilator slowly against the direction of hair growth. Start with the lowest speed setting if you are new to epilation.

Does the LS2670 come with a warranty?

Yes, the DCG LS2670 comes with a 2-year warranty against manufacturing defects. Keep your proof of purchase for warranty claims.

USER MANUAL LS2670 DCG

CARATTERISTICHE TECNICHE

Batteria: al litio da 600mAh

220-240V\~, 50/60Hz, 3W

Please read this instruction manual before first use of the appliance and keep the booklet for future needs!

USER'S MANUAL

INTRODUCTION

Thank you for choosing our new epilator, you can remove unwanted hair easily and effectively, let you more confident and dapper.

1. The two-level speed design and the rotating discs catch even the shortest hairs and pull them out by the root. Epilating with this new appliance leaves your skin smooth and hair-free for several weeks.
2. With grooming function, it can replace the head part and groom easily on main body.
3. With rechargeable function; charging time: 8 hours, it can work for 30-40 minutes aftercharging.

Epilating, shaving and trimming

The appliance is suitable for use in the bath or shower, but it can also be used dry. If you want to use creams or body lotion, apply them after you have used the appliance.

For gentle, less painful epilation, use the appliance on wet skin with or without your regular shower gel.

Slight skin irritation like red skin or red dots may occur after epilation.

This is normal. We advise you to epilate before you go to bed at night, as any redness or skin irritation usually disappears overnight.

Note: The appliance can only be used without cord.

1. When you epilate (with or without an accessory on the epilating head), place the appliance on the skin at the angle shown in the illustration.
2. When you use the appliance with other heads and accessories than the epilating head, make sure you place the heads and accessories flat onto the skin.
3. When you use the appliance on sensitive areas, stretch the skin with your free hand.
   When you use the appliance on your underarms, raise your arm and put your hand on the back of your head to stretch the skin.
4. Move the appliance slowly against the direction of hair growth.

Note: If you move the appliance over your skin too fast, you may not obtain a smooth result.

Note: If your hair are longer than 3-4mm, pretrim them for easier and more comfortable epilation.

Epilating head

You can use the epilating head to epilate your legs, underarms and bikini line. Select speed 2 for most efficient epilation. Select speed 1 for areas with little hair growth and for hard-to-reach areas such as knees and ankles.

Massage cap

You can attach the massage cap onto the epilating head to massage the skin and minimize the pulling sensation of epilation during use.

Skin stretcher cap

You can attach the skin stretcher cap onto the epilating head. It keeps the skin tight during epilaton to reduce pain.

Delicate area cap

You can attach the delicate area cap onto the epilating head for more comfortable epilation of delicate areas (e.g. the underarms and bikini line).

Facial cap

You can attach the facial cap onto the epilating head for precise epilation of facial hair (e.g. above your upper lip).

Do not use the appliance to epilate eyelashes, eyebrows or scalp hair.

Shaving head

You can use the shaving head to shave your legs and body.

Note: The appliance can be moved in two directions, for easier shaving of underarms.

Note: Always check the foil before use. If it is damaged in any way, replace the cutting unit right away(see, Replacement).

Comb for shaving head

You can attach the comb onto the shaving head to trim hairs to a length of 3mm.

Trimming head

You can use the trimming head to trim hard - to - reach areas in the bikini zone.

Place the trimming head flat onto the skin to trim. Place the trimming head perpendicularly onto the skin for styling and shaping. .

Comb for trimming head

You can attach the comb onto the trimming head to trim hairs in the bikini area to a length of 3mm.

Body massage head

The body massage head rotates firmly to relax your muscles.

Note: You have to put the body massage head to the coupling unit before you can attach it onto the handle.

Body exfoliation brush

You can use the body exfoliation brush to remove dead skin cells.

Do not use the body exfoliation brush on your face.

Note: You have to put the body exfoliation brush on the coupling unit before you can attach it onto the handle.

Callus head

You can use the callus head to remove the dead skin on foot.

IMPORTANT

• Read these instructions for use carefully before using the appliance and save them for future reference.
• Check it the main voltage indicated on the appliance corresponds to the local main voltage before you conned the appliance.
• Regular cleaning and proper maintenance ensure optimal results and a long life for your appliance.
• To prevent damage and injuries, Keep the running appliance away from your hair, eyebrows, eyelashes, threads, clothes etc.
• Using an epilator at the start may cause reddening or irritation of the skin. This is normal reaction that will quickly disappear. However, please contact your doctor if the irritation has not disappeared within three days.
• Only use the appliance in combination with the adapter.
• If the product is damaged, it must be replaced by qualified persons in order to avoid a hazard.
• Keep the appliance out of the reach of children.

PREPARJNG FOR USE

• Make sure your skin is clean, entirely dry and free from grease. Do not use any cream before you start epilating.
• Epilation is easier just after taking a bath or shower. Make sure your skin is completely dry when you start epilating.
• After epilation, you can apply a mild cream or lotion to help reduce possible skin irritation.

USING THE APPLIANCE

• Insert the appliance plug into the appliance
• Insert the main plug into the wall socket a) Shaving
• In orderto get the best effect, move the appliance over the skin against the direction of hair growth
• Stretch the skin with your free hand to make razor flat on skin and to make trimmer and foil work simultaneously.

b) Epilating

• Press the bunon to change head parts, press both sides of razor head with thumb, remove bead parts install epilator parts and then use
• Select speed 1 for areas with little hair growth, for hard-to-reach areas and for areas where bones are located directly beneath the skin, such as knees and ankles
• Select speed 2 for larger areas with stronger hair growth
• Stretch the skin with your free band to make the hairs stand upright
• Place the epilator perpendicularly onto the skin with the On/Off slide pointing in the direction in which you are going to move the appliance
• Move the appliance slowly over the skin, against the direction of hair growth
• Switch the appliance off by pushing the On/Off slide pointing 0

2.Chargjng

• Turn off the switch and connect transformer with machine, then switch on the power, it indicates well recharging when the indicator lights
• It takes about 8 hours to charge the epilator completely, or it will affect battery life and even cause unnecessary circuit damage.
• It can be charged after fully release power so as not to affect the charging
• After charging, shave and epilate as shown in a& b.

For a good and smooth epilating result, it is essential that you clean the epilating head after each use.

• Switch the appliance off
• Clean the epilating discs of the epilating head and all other parts that have become accessible with the brush supplied
• Do not use aggressive cleaners, scouring agents, petrol, acetone etc. to clean the plastic housing of the appliance.
• Never try to remove the epilating discs from the epilating head.

Symbol of a trash bin crossed with two crossed lines, no text or numbers present