B5T41024IW - Tumble drier BEKO - Free user manual and instructions
Find the device manual for free B5T41024IW BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Condenser Tumble Dryer |
| Brand | Beko |
| Model | B5T41024IW |
| Capacity (kg) | 8 |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Net Weight | 44 kg |
| Power Supply | 230 V, 50 Hz |
| Energy Efficiency Class | A++ |
| Annual Energy Consumption (kWh) | 561 |
| Noise Level (dB) | 65 |
| Drying Programs | Cotton, Synthetics, Mix, Delicates, Shirts, Jeans, Sport, Wool, Bed & Bath, Time Dry |
| Drying Technology | Heat Pump |
| Anti-Crease Function | Yes |
| Delay Timer | Yes (up to 24 hours) |
| Child Lock | Yes |
| Water Tank Capacity (L) | 4.5 |
| Fluff Filter | Yes (clean after each cycle) |
| Reversible Door | Yes |
| Warranty | 2 years |
| Spare Parts Availability | Contact authorized service |
Frequently Asked Questions - B5T41024IW BEKO
How do I clean the fluff filter on my Beko B5T41024IW dryer?
Open the door, pull out the fluff filter located at the bottom of the door opening. Remove the lint by hand or using a soft brush. Rinse under water if needed, then dry and reinsert. Clean after every cycle for optimal performance.
Why are my clothes not drying completely?
Check if the fluff filter is clean, the water tank is empty, and the load size is not too large. Ensure the correct program is selected and the room temperature is not too high. For heat pump dryers, also check the condenser filter.
What do the error codes on my Beko dryer mean?
Common errors: E1 (water tank full), E2 (fluff filter blocked), E3 (condenser filter blocked), E4 (drying sensor fault). Refer to the manual for full list. Reset by turning the dryer off and on.
How do I install the Beko B5T41024IW dryer?
Place the dryer on a stable, level surface. Remove all packaging and transport bolts. Connect the drain hose to a suitable outlet or empty the water tank manually. Plug into a grounded 230V outlet.
What is the energy consumption of this dryer?
The Beko B5T41024IW has an energy efficiency class A++ with an estimated annual consumption of 561 kWh based on 160 drying cycles. Actual consumption varies by load and program.
What is the maximum load capacity?
The maximum dry weight capacity is 8 kg for cotton programs. For synthetic and delicate items, reduce the load to half the maximum to prevent overloading.
How can I activate child lock on my Beko dryer?
Press and hold the Child Lock button (usually marked with a padlock icon) for 3 seconds until the indicator lights up. To deactivate, press and hold again until the light turns off.
Can I delay the start time on the dryer?
Yes, select the desired drying program, then press the Delay button repeatedly to set the delay in hours (up to 24). Press Start to begin the countdown.
Why is my dryer making excessive noise?
Check if the dryer is level and not touching walls. Ensure no loose objects like coins or buttons are inside. Overloading or unbalanced loads can also cause noise. If noise persists, contact service.
Does this dryer need venting?
No, the Beko B5T41024IW is a condenser dryer with a heat pump. It does not require external venting. The moisture is collected in an internal water tank or can be drained via a hose.
User questions about B5T41024IW BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual B5T41024IW - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. B5T41024IW by BEKO.