JSW-4000U - Saw Ozito - Free user manual and instructions

Brand	Ozito
Model	JSW-4000U
Product Type	Jigsaw
Power Input	400 W
Voltage	230 V ~ 50 Hz
No-Load Speed	500 – 3000 min⁻¹
Stroke Length	20 mm
Cutting Capacity (Wood)	65 mm
Cutting Capacity (Steel)	6 mm
Bevel Cut Adjustment	0° – 45°
Blade Type	T-shank
Weight	2.1 kg
Dimensions (L x W x H)	260 x 80 x 200 mm
Dust Extraction Port	Yes, 35 mm
Soft Grip Handle	Yes
Lock-On Button	Yes
Blade Change System	Tool-free
Operating Modes	Orbital & straight
Protection Class	II (double insulated)
Supplied Accessories	Blade, hex key, dust adapter

Frequently Asked Questions - JSW-4000U Ozito

What is the power rating of the Ozito JSW-4000U jigsaw?

The Ozito JSW-4000U jigsaw has a power input of 400 watts, suitable for cutting wood, metal, and plastic.

How do I change the blade on the JSW-4000U?

The JSW-4000U features a tool-free blade change system. Simply release the lever, insert the new T-shank blade, and lock it in place.

What materials can this jigsaw cut?

It can cut wood up to 65 mm thick, steel up to 6 mm, as well as plastics and non-ferrous metals.

Does the JSW-4000U have a variable speed control?

Yes, it has a variable speed trigger with a range of 500 to 3000 strokes per minute for different materials.

Can I make bevel cuts with this saw?

Yes, the footplate can be tilted up to 45° to make bevel cuts. Loosen the adjustment screw, set the angle, and retighten.

Is there a dust extraction feature?

The jigsaw has a dust extraction port (35 mm) that can be connected to a vacuum cleaner to keep the work area clean.

What type of blade does the JSW-4000U use?

It uses T-shank blades, which are common and widely available for jigsaws.

How do I adjust the orbital action?

The orbital action can be adjusted via a lever on the side of the saw, offering 4 settings from straight cut to aggressive orbital.

What maintenance does this jigsaw require?

Regularly clean the ventilation slots, check the power cord for damage, and lubricate the blade guide occasionally with light oil.

Is the Ozito JSW-4000U double insulated?

Yes, it is double insulated (Class II), so no earth connection is required for safety.

USER MANUAL JSW-4000U Ozito

We have competent service partners in all countries named on the guarantee certificate whose contact details can also be found on the guarantee certificate. These partners will help you with all service requests such as repairs, spare and wearing part orders or the purchase of consumables.

Please note that the following parts of this product are subject to normal or natural wear and that the following parts are therefore also required for use as consumables.

Category Example
Wear parts' Carbon brushes, Guide roller
Consumables' Saw blade
Missing parts

* Not necessarily induced in the scope of delivery!

In the effect of defects or faults, please register the problem on the Internet at www.isc-gmbh.info. Please ensure that you provide a precise description of the problem and answer the following questions in all cases:

• Did the equipment work at all or was it defective from the beginning?
• Did you notice anything (symptom or defect) prior to the failure?
• What malfunction does the equipment have in your opinion (main symptom)? Describe this malfunction.

Declaration of confirmity

Jigaw JSW-4000U (Ozite)
2014/25/EU	2006/42/EC
2005/02/EC_2005/125/EC	Annex IV
2014/25/EU	2007/02/EC
2005/25/EC	Reg No.
2014/20/EU	2001/4EC_2005/8/EC
2014/20/EU	Annex V
2014/5/EC	Bancus M
2014/8/EU	Socum resacce#t_##(R) (###) ###(R) K
90/99/EC_2006/142/EC	Pa EMC 35-75
80/85/EC_90/85/EC	RcA## No.
2014/25/EU

JSW-4000U

GB Additional operating & safety instructions Jigsaw

Line drawing of a mechanical device labeled 'ozito' (no additional text or symbols)

Danger! Read the operating instructions to reduce the risk of inquiry

Caution! Wear car-muffs. The impact of noise can cause damage to hearing.

Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on wood and other materials. Never use the device to work on any materials containing asbestos!

Caution! Wear safety goggles. Sports generated during working or spirilers, chips and dust emitted by the device can cause loss of sight.

The reporting or reproduction by any other means, in whole or in part, of documentation and papers accompanying products is permitted only with the express consent of the ISC GmbH.

Subject to technical changes

Items supplied

Please check that the article is complete as specified in the scope of delivery. If perse are missing, please contact our service center or the sales outlet where you made your purchase at the latest within 5 working days after purchasing the product and upon presentation of a valid bill of purchase. Also, refer to the warranty table in the service information as the end of the operating instructions.

- Open the packaging and take out the equipment with one

• Remove the packaging material and any

packaging and/or transportation braces (if available)

BVerkel.OB

- Check to see if all home are supplied. - Insect the equipment and accessories

- Inspect the equipment and accessories for transport damage.

• If possible, please keep the packaging until the end of the guarantee period.

the end of the guarantee period

Danger!

The equipment and packaging material are not toys. Do not let children play with plastic bags, folls or small parts. There is a danger of swelling or swellingful.

Proper use

The ligase is designed for sawing wood, metals, non-ferrous metals and plastics using the appropriate saw blade.

The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. The user / operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a result of this.

Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voiced if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.

Technical data

Mains voltage: 230-240 V -- 50 Hz

Power consumption: 400 W

Stroke speed: 500 - 2,900spm

Stroke height 10 mm Cut line depth wood 55 mm

Cutting depth, wood: 60 mm Cutting depth, plastic: 12 mm

Cutting depth, iron/Aluminum: 6 mm

Miter cut: up to 45° (left and right)

Protection class: Ⅱ / Ⅲ

Sound and vibration

Sound and vibration values were measured in

accordance with EN 60745.

L_ss sound pressure level ....88 dB(A)

K, uncertainty 3 dB

L_out sound power level 87 dB(A)

K_ns uncertainty

Wear ear-muffs.

The impact of noise can cause damage to hea-

ing.

Total vibration values (vector sum of three direc-

tions) determined in accordance with EN 60746.

Cutting wood

Vibration emission value a _1 = 7.06 m/s ^2

K uncertainty = 1.5 m/s ^2

Cutting sheet metal

Vibration emission value a _s = 5.10 m/s ^2

K uncertainty = 1.5 m/s ^2

The specified vibration value was established in accordance with a standardized testing method. It may change according to how the electric equipment is used and may exceed the specified value in exceptional circumstances.

The specified vibration value can be used to

compare the equipment with other electric power

The specified vibration value can be used for ini-

al assessment of a harmful effect.

Keep the noise emissions and vibrations to a

minimum.

• Only use appliances which are in perfect wor-

King Order.

• Service and clean the appliance regularly.

- Adopt your working style to suit the appliance. - Do not overload too appliance.

- Do not open the appliance. - Have the appliance specified whenever

Halo de application of 100%

• Switch the appliance off when it is not in use.

• Wear protective gloves

Caution!

Residual risks

Even if you use this electric power tool in ac-

cordance with instructions, certain residual

risks cannot be rules out. The following ha-

zards may arise in connection with the equipment's construction and layout:

1. Luna damage il no suitable protective dust

mass is used

1. Damage to hearing if no suitable ear protecti

on is used.

1. Health damage caused by hand-arm vibrate

tions if the equipment is used over a pro-

longed period or is not properly guided and maintained.

For EU countries only

Never place any electric power tools in your

household refuse.

To comply with European Directive 2012/19/EC

concerning old electric and electronic equipment

and its implementation in national laws, old electric power tools have to be separated from other

his power tools have to be superior from other waste and disposed of in an environment-friendly

fashion, e.g. by taking to a recycling depot.

Recycling alternative to the return request:

As an alternative to returning the equipment to

the manufacturer, the owner of the electrical equipment must make sure that the solution

equipment, must make sure that the equipment is properly disposed of if he no longer wants to

to properly disposed of the no longer wants to keep the equipment. The old equipment can be

returned to a suitable collection point that will

disposse of the equipment in accordance with the

national recycling and waste disposal regulation This does not apply to any processing or side

This does not apply to any accessories or tools without electrical components supplied with the

old equalament