PXCSS-500U - Saw Ozito - Free user manual and instructions

Product Type	Cordless Circular Saw
Brand	Ozito
Model	PXCSS-500U
Power Source	18V Lithium-ion battery (Power X Change compatible)
Blade Diameter	165 mm
Arbor Size	20 mm
Max Depth of Cut at 90°	55 mm
Max Depth of Cut at 45°	38 mm
No-Load Speed	4500 RPM
Weight (without battery)	2.8 kg
Dimensions (L x W x H)	310 x 200 x 240 mm
Bevel Capacity	0° to 45°
Cutting Capacity	Timber, plywood, MDF, particle board
Protection Class	Class II (double insulated)
Safety Features	Blade guard, safety switch, spindle lock
Included Accessories	Blade, rip fence, hex key, parallel guide
Maintenance	Regular cleaning, blade sharpening, brush inspection
Spare Parts	Available: blades, carbon brushes, battery, charger

Frequently Asked Questions - PXCSS-500U Ozito

What type of battery does the Ozito PXCSS-500U use?

The PXCSS-500U uses an 18V lithium-ion battery from the Ozito Power X Change system. Always use compatible batteries to ensure performance and safety.

How do I change the blade on this circular saw?

First, disconnect the battery. Press the spindle lock to secure the blade. Use the included hex key to loosen the arbor bolt, remove the outer flange and old blade, then install the new blade with teeth pointing in the correct direction. Tighten the bolt securely.

What is the maximum cutting depth at 90 degrees?

The maximum depth of cut at 90° is 55 mm. For bevel cuts at 45°, the maximum depth reduces to 38 mm.

Can I use the PXCSS-500U to cut metal?

No, this saw is designed for wood and wood-based materials only. Using it on metal may damage the blade and endanger the user.

How do I adjust the bevel angle?

Loosen the bevel lock lever located near the base plate. Tilt the base to the desired angle (0° to 45°) and tighten the lever to lock. Check the angle with a protractor if needed.

Why does the saw stop during cutting?

Possible causes: the battery is discharged, the blade is jammed, or the motor overload protection has triggered. Remove the battery, clear any obstruction, and allow the tool to cool before resuming.

How do I clean the saw?

After each use, remove the battery and wipe the exterior with a dry cloth. Use compressed air to blow dust out of the motor vents and blade guard. Do not use water or solvents.

What spare parts are available for this model?

Common spare parts include replacement blades, carbon brushes, battery packs, and chargers. Contact Ozito customer service or visit their website for genuine parts.

Can I use a larger blade for deeper cuts?

No, only use blades with a diameter of 165 mm. Larger blades may contact the blade guard and cause injury or damage.

How do I store the saw safely?

Always remove the battery before storage. Keep the saw in a dry place, out of reach of children. Use the blade guard and store the saw in its case or on a rack.

USER MANUAL PXCSS-500U Ozito

We have competent service partners in all countries named on the guarantee certificate whose contact details can also be found on the guarantee certificate. These partners will help you with all service requests such as repairs, space and wear no part orders or the purchase of consumables.

Please note that the following parts of this product are subject to normal or natural wear and that the following parts are therefore also required for use as consumables.

Category Example
Wear parts' Battery
Consumables' Saw blade
Missing parts

* Not necessarily included in the scope of delivery!
In the effect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Please ensure that you provide a precise description of the problem and answer the following questions in all cases:
• Did the equipment work at all or was it defective from the beginning?
- Did you notice anything (symptom or defect) prior to the failure? - What malfunction does the equipment have in your opinion (main symptom)? Describe this malfunction.

E→B→C

Store the battery only in dry rooms with an ambient temperature of +10°C to +40°C. Place only charged batteries in storage (charged at least 40%). (not included in delivery)

The reprinting or reproduction by any other means, in whole or in part, of documentation and papere accompanying products is permitted only with the express consent of the ISC GmbH.

Subject to technical changes

Declaration of conformity

Cordless Circular Saw PXCS5-500U / Fast Charger PXCG-030U (Ozilo)
☐ 201420SEU ☐ 200592/EC_2009/12/EC ☐ 201478SEU ☐ 200592/EC ☐ 201420SEU ☐ 201420SEU ☐ 201452/EC ☐ 201488SEU ☐ 90/96/EC_2009/142/EC ☐ 89/86/EC_90/98/EC ☐ 201478SEU	☐ 200592/EC ☐ Almoc IV RNG or reoing Mag No. ☐ 200591/EC 200598/EC ☐ Almoc V ☐ Almoc VI RNG or reoing Mag No. ☐ 201420SEU ☐ 201420SEU ☐ 201478SEU ☐ 90/96/EC_2009/142/EC ☐ 89/86/EC_90/98/EC ☐ 201478SEU

PXCSS-500U

GB Additional operating & safety Instructions Cordless Circular Saw

Line drawing of a cut-out saw labeled 'ozito' (no additional text or symbols)

Danger! Read the operating instructions to reduce the risk of inquiry

Caution! Wear car-muffs. The impact of noise can cause damage to hearing.

Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on wood and other materials. Never use the device to work on any materials containing asbestos!

Caution! Wear safety goggles. Sparks generated during working or splinters, chips and dust emitted by the device can cause loss of sight.

Pull out the plug or battery pack!

Caution! Risk of Injury! Do not reach into the running saw blade.

Items supplied

Please check that the article is complete as specified in the scope of delivery. If parts are missing, please contact our service center or the sales outlet where you made your purchase at the latest within 5 working days after purchasing the product and upon presentation of a valid bill of purchase. Also, refer to the warranty table in the service information at the end of the operating instructions.

- Open the packaging and take out the equipment with case

- Remove the packaging material and any packaging and/or transportation braces (if available).

• Check to see if all items are supplied.

• Inspect the equipment and accessories for transport damage.

• If possible, please keep the packaging until

the end of the guarantee period

Danger!

The equipment and packaging material are not toys. Do not let children play with plastic bags, foils or small parts. There is a danger of swallowing or suffocating!

Proper use

The cordless handheld circular saw is designed for sawing straight cuts in wood, wood-type materials and plastics. In the case of plastic work pieces, be careful not to overheat the tips of the saw blade and met the plastic.

The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. The user / operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a result of this.

Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.

Technical data

Motor power supply:	18 V DC
Liding speed:	4200/min
Cutting depth at 90°:	48 mm
Cutting depth at 45°:	32 mm
Saw blade:	∅ 150 mm
Blade hover:	∅ 10/16 mm
Blade thickness:	1.6 mm

Danger!

Sound and vibration

Sound and vibration values were measured in

L_ss sound pressure level ....83.83 dB(A)

K, uncertainty 3 dB

L_out sound power level 94.83 dB(A)

K_ns uncertainty

Wear ear-muffs.

The impact of noise can cause damage to hearing.

Total vibration values (vector sum of three direc-

tions) determined in accordance with EN 60746.

Handle

Vibration emission value a_N = 3.534 m/s^2

K uncertainty = 1.5 m/s

Additional handle

Vibration emission value a_eff = 3.889 m/s

K uncertainty = 1.5 m/s ^2

The specified vibration value was established in accordance with a standardized testing method. It may change according to how the electric equipment is used and may exceed the specified value in exceptional circumstances.

The specified vibration value can be used to

compare the equipment with other electric power

10015.

The specified vibration value can be used for initial assessment of a harmful effect.

Keep the noise emissions and vibrations to a

minimum.

• Only use appliances which are in perfect wor-

King Order.

• Service and clean the appliance regularly.

- Adopt your working style to suit the appliance. - Do not overload too appliance.

- Do not open the appliance. - Have the appliance serviced whenever

10.2.1.

• Switch the appliance off when it is not in use.

• Wear protective gloves

Caution!

Residual risks

Even if you use this electric power tool in ac-

cordance with instructions, certain residual

risks cannot be rules out. The following har- rands may arise in connecting with the equin-

Zards may arise in connection with the eq. ment's construction and layout:

1. Lung damage if no suitable protective dust

mask is used.

1. Damage to hearing if no suitable ear protecti

on is used.

1. Health damage caused by hand-term vibrations if the equipment is used over a pro-

dolls in the equipment is used over a pre-lanned award or is not properly queried and

longed pen maintained

For EU countries only

Never place any electric power tools in your

household refuse.

To comply with European Directive 2012/19/EC

concerning old electric and electronic equipment and its implementation in national law, old elec-

sird its implementation in historical laws, old electric power tools have to be separated from other

waste and disposed of in an environment-friendly

fashion, e.g. by taking to a recycling depot.

Recycling alternative to the return request:

As an alternative to returning the equipment to

the manufacturer, the owner of the electrical equipment must make sure that the pavement

equipment, must make sure that the equipment is properly disposed of if he no longer wants to

to properly disposed of the no longer wants to keep the equipment. The old equipment can be

returned to a suitable collection point that will

dispose of the equipment in accordance with the

national recycling and waste disposal regulations. This does not apply any otherwise oxide

This does not apply to any accessories or areas without electrical components supplied with the

old equipment.

This consignment contains lithium-ion batteries.

In accordance with special provision 188 this

consignment is not subject to the ADR regula-

nors. Handle with cars. Danger or ignition in case of damage to the constraint package. If the

of damage to the consignment package. The consignment package is damaged: Check and

If necessary repackage. For further information

contact: 0049 1807 10 20 20 66 (fixed network

14 central, mobile phone max. 42 central; Outside Germany; phone will appoint need for a regular

call to a landline number in Germany.

Charger indicator / Fast Charger

Indicator status	Explanations and actions
Red LED Green LED
Off Flashing Ready for use	The charger is connected to the main and is ready for use; there is no battery pack in the charger
On Off Charging	The charger is charging the battery pack in quick charge mode.
Off On The battery is 85% - 100% charged and ready for use.(Charging time for 1.5 Ah battery: 30 min)(Charging time for 2.0 Ah battery: 40 min)(Charging time for 3.0 Ah battery: 60 min)(Charging time for 4.0 Ah battery: 80 min)(Charging time for 5.0 Ah battery: 105 min)Action:Take the battery pack out of the charger. Disconnect the charger from the main supply.
Flashing Off Adapted charging	The charger is in generic charging mode.Fat safety reasons the charging is performed less quickly and takes more than 1 hour. The reasons can be:- The battery pack has not been used for a very long time or an already fat battery was further discharged (exhaustive discharge).- The battery pack temperature is outside the ideal range (between 20^ C and 45^ C);Action:Wait for the charging to be completed; you can still continue to charge the battery pack.
Flashing Flashing Fault	Charging is no longer possible. The battery pack is detective.Action:Never charge a detective battery pack.Take the battery pack out of the charger.
On On Temperature fault	The battery pack is too hot (e.g., due to direct sunshine) or too cold (below 0^ C).Action:Remove the battery pack and keep it at room temperature (approx. 20^ C) for one day.