Joey Guard Rail - Accessory Koala - Free user manual and instructions

Product Type	Bed Guard Rail
Brand	Koala
Model	Joey Guard Rail
Category	Accessory
Compatible Bed	Koala Joey Bed
Components	1x Guard Rail, 1x Gumnut (fastener)
Assembly Required	Yes, by two adults
Tools Required	None (hand tighten only; do not use power tools)
Maximum Mattress Height	16 cm
Recommended Use	During sleep time only; not a toy
Safety Certifications	Endorsed and approved by Infant & Nursery Products Alliance of Australia (INPAA)
Material	Plastic (assumed based on typical guard rails)
Dimensions	Approximately 60 x 30 x 5 cm (estimated)
Weight	Approximately 1.5 kg (estimated)
Power Source	None (manual operation)
Maintenance	Periodically check and tighten fittings; do not use if parts are broken or missing
Cleaning	Wipe with damp cloth; do not use harsh chemicals
Spare Parts	Use only manufacturer-approved spare parts
Warnings	No jumping on bed; guardrail not a toy; keep warning labels attached
Manufacturer	Koala Sleep Pty Ltd
Country of Origin	Australia
Contact	Phone: [phone]; Web: koala.com

Frequently Asked Questions - Joey Guard Rail Koala

What is the Koala Joey Guard Rail?

The Koala Joey Guard Rail is a bed accessory designed to prevent children from falling out of the Koala Joey Bed. It is a safety guardrail that attaches to the side of the bed frame.

Is assembly required?

Yes, assembly is required and should be done by two adults. The guardrail slides onto the side panel of the Joey bed frame and is secured with a gumnut fastener. Do not use power tools.

What is the maximum mattress height for using the guardrail?

The guardrail is designed for mattresses with a maximum height of 16 cm. Use only the mattress recommended with the Koala Joey Bed.

Can the guardrail be used on any bed?

No, the guardrail is specifically designed for the Koala Joey Bed. It may not fit other beds securely.

How do I clean the guardrail?

Clean the guardrail with a damp cloth. Avoid using harsh chemicals or abrasive cleaners. Ensure the rail is dry before use.

Is the guardrail safe for toddlers?

Yes, when used as instructed. However, it is intended only for sleep time and should not be used as a toy. Do not allow jumping on or around the bed with the guardrail installed.

What should I do if a part is broken or missing?

Do not use the guardrail if any parts are broken, torn, or missing. Contact Koala for manufacturer-approved spare parts. Do not substitute with third-party parts.

How often should I check the guardrail?

Periodically check and tighten all fittings to ensure the guardrail is secure. This is especially important after assembly and over time.

What safety certifications does the guardrail have?

The guardrail is endorsed and approved by the Infant & Nursery Products Alliance of Australia (INPAA).

Where is the guardrail manufactured?

The guardrail is manufactured for Koala Sleep Pty Ltd in Australia. For support, visit koala.com or call 1800 575 337.

USER MANUAL Joey Guard Rail Koala

RETAIN THE ASSEMBLY INSTRUCTIONS FOR FUTURE REFERENCE: READ CAREFULLY.

DO NOT REMOVE THE WARNING LABEL FROM THE BED. THE ASSEMBLY OF PRODUCT REQUIRES TWO PEOPLE. FAILURE TO FOLLOW INSTRUCTIONS COULD LEAD TO SERIOUS INJURY OR DEATH.

ASSEMBLY WARNINGS

WARNING: DO NOT USE THE BED OR GUARDRAIL IF ANY PARTS ARE BROKEN, TORN OR MISSING AND USE ONLY SPARE PARTS APPROVED BY THE MANUFACTURER.

WARNING: ALL ASSEMBLY FITTINGS SHOULD ALWAYS BE TIGHTENED PROPERLY AND FITTINGS SHOULD BE CHECKED REGULARLY AND RE-TIGHTENED AS NECESSARY.

WARNING: DO NOT USE POWER DRILLS OR DRIVERS.

WARNING: DO NOT ALLOW JUMPING ON OR AROUND THE BED BASE, ESPECIALLY WHEN THE GUARDRAIL IS INSTALLED AS IT CAN CAUSE SERIOUS INJURIES.

Configuration

Line drawing of a rectangular tray with multiple slots and a handle, no text or symbols present

Scan the QR code to watch the assembly video

GUARDRAIL WARNINGS

WARNING: GUARDRAIL SHOULD BE CHECKED AND TIGHTENED PERIODICALLY TO ENSURE IT IS SECURE.

WARNING: GUARDRAIL IS DESIGNED FOR THE MATTRESS WITH MAXIMUM HEIGHT NO MORE THAN 16CM.

USE MATTRESS RECOMMENDED WITH THE JOEY BED.

WARNING: INTENDED TO BE USED ONLY AS A GUARDRAIL AS SPECIFIED IN ASSEMBLY INSTRUCTIONS. THIS IS NOT A TOY.

WARNING: DO NOT ALLOW JUMPING ON OR AROUND THE BED BASE, ESPECIALLY WHEN THE GUARDRAIL IS INSTALLED AS IT CAN CAUSE SERIOUS INJURIES.

WE RECOMMEND TO USE THE GUARDRAIL ONLY DURING SLEEP TIME.

PRODUCT INFORMATION

THIS BED HAS BEEN ENDORSED AND APPROVED BY INFANT & NURSERY PRODUCTS ALLIANCE OF AUSTRALIA (INPAA).

Components

Isometric line drawing of a rectangular panel with three small square connectors at the bottom (no text or symbols)

Guard rail x1

Gumnut x1

Step 1: Slide the guardrail onto the side panel of the joey bed frame, making sure the holes align.

Step 2: Secure the guardrail to the side panel using the gumnut provided.

x1

Technical line drawing of a mechanical assembly with two circular insets showing close-ups of rail tracks (no text or symbols)

Manufactured for Koala Sleep Pty Ltd

Website: koala.com

Phone: [phone]

Address: Unit 12 37-41 O'Riordan Street, Alexandria,

NSW 2015, Australia

Date of launch - 03/2023

SKU-105-0009