dsPIC33FJ256MC710A - Microcontroller Microchip - Free user manual and instructions
Find the device manual for free dsPIC33FJ256MC710A Microchip in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 16-bit Digital Signal Controller (DSC) |
| Core Architecture | dsPIC33E |
| Maximum CPU Speed | 40 MIPS |
| Program Memory Size | 256 KB Flash |
| Data Memory Size | 30 KB SRAM |
| EEPROM Size | None (Flash emulation available) |
| Digital I/O Pins | 85 |
| Analog Inputs | 32 channels, 10-bit/12-bit ADC |
| Operating Voltage Range | 3.0V to 3.6V |
| Package Type | 100-pin TQFP |
| Dimensions | 14 mm x 14 mm x 1.4 mm |
| Weight | Approx. 1.5 g |
| Main Functions | Motor control, digital power conversion, sensor processing, audio |
| Communication Interfaces | UART, SPI, I2C, CAN, USB (OTG) |
| Timers/Counters | 9 x 16-bit, 4 x 32-bit timers |
| PWM Modules | 8 channels with dead-time insertion |
| Operating Temperature | -40°C to +85°C |
| Development Tools | MPLAB X IDE, XC16 Compiler, ICD 4 programmer |
| Maintenance and Cleaning | Keep pins clean; use isopropyl alcohol if needed |
| Safety Precautions | ESD sensitive; avoid voltages above 3.6V |
| Spare Parts / Repairability | Order from Microchip distributors; rework with hot air station |
Frequently Asked Questions - dsPIC33FJ256MC710A Microchip
How do I program the dsPIC33FJ256MC710A?
Use MPLAB X IDE with an ICD 4 or PICkit 4 programmer. Connect to the ICSP pins (PGD, PGC, MCLR, VDD, VSS).
What is the maximum operating voltage?
The absolute maximum supply voltage is 3.6V. Operating range is 3.0V to 3.6V.
Does this microcontroller have a built-in DAC?
No, the dsPIC33FJ256MC710A does not have a built-in DAC. However, you can generate analog outputs using PWM with an external low-pass filter.
Can I use USB communication?
Yes, it integrates a USB 2.0 On-The-Go (OTG) module supporting both host and device modes.
What are the main differences between dsPIC33 and PIC24?
dsPIC33 devices include a digital signal processor (DSP) engine for faster math operations, while PIC24 are general-purpose 16-bit MCUs without DSP.
How do I reduce power consumption?
Use the idle and sleep modes. Disable unused peripherals via the PMDx registers.
What is the maximum current per I/O pin?
Each I/O pin can source or sink up to 25 mA. Total current for all ports should not exceed 200 mA.
Are there any development boards available?
Yes, Microchip offers the Explorer 16 Development Board and the dsPICDEM MCHV-3 for motor control.
Can I use this microcontroller for 3-phase motor control?
Absolutely. It features 8 PWM channels with dead-time control, ideal for driving MOSFETs/IGBTs in motor drives.
Where can I find the user manual?
The full user manual is available on Microchip's website (document DS70318B). You can also download it from notice-facile.com in PDF.
User questions about dsPIC33FJ256MC710A Microchip
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microcontroller in PDF format for free! Find your manual dsPIC33FJ256MC710A - Microchip and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. dsPIC33FJ256MC710A by Microchip.