J627T - Heating Hubbell - Free user manual and instructions
Find the device manual for free J627T Hubbell in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Heater |
| Brand | Hubbell |
| Model | J627T |
| Power Source | Electric |
| Voltage | 120V |
| Wattage | 1500W |
| Heating Type | Convection |
| Dimensions (H x W x D) | 17.5 x 12 x 8.5 inches |
| Weight | 10 lbs |
| Material | Steel with powder coating |
| Controls | Manual dial thermostat |
| Safety Features | Tip-over switch, overheat protection |
| Certifications | ETL listed |
| Installation | Freestanding or wall-mounted |
| Maintenance | Vacuum dust from vents regularly |
| Cleaning | Wipe with damp cloth, unplug first |
| Spare Parts | Replacement thermostats and elements available |
| Warranty | 1 year limited |
| Energy Efficiency | Standard efficiency |
| Noise Level | Low - silent operation |
| Color | White |
| Use | Indoor spaces |
Frequently Asked Questions - J627T Hubbell
How do I set the temperature on my Hubbell J627T heater?
Turn the thermostat dial on the unit clockwise to increase temperature or counterclockwise to decrease. The heater will cycle on and off to maintain the set temperature.
Is the J627T heater safe to leave unattended?
The heater has built-in safety features including a tip-over switch and overheat protection. However, it is recommended to not leave it unattended for extended periods and to keep flammable materials away.
How do I clean the J627T heater?
Unplug the heater and allow it to cool. Use a vacuum with a brush attachment to clean dust from the vents. Wipe the exterior with a damp cloth. Do not immerse in water.
What is the power consumption of the J627T?
The heater is rated at 1500W at 120V. It consumes up to 12.5 amps. Operating costs vary based on local electricity rates.
Can I mount the J627T on the wall?
Yes, the J627T can be used as a freestanding unit or mounted on the wall. Wall mounting bracket and hardware may be included or sold separately.
Does the J627T have a timer?
No, the J627T model does not include a timer. It uses a manual thermostat for temperature control.
What should I do if the heater doesn't turn on?
Check that the unit is plugged into a working outlet and the thermostat dial is turned to a high enough setting. Confirm the circuit breaker is not tripped. If problem persists, contact Hubbard support.
Is the J627T suitable for bathrooms?
The J627T is designed for indoor dry locations. It is not rated for damp or wet environments like bathrooms unless specifically listed for such use.
How long does the warranty last for the J627T?
The Hubbell J627T comes with a 1-year limited warranty covering defects in materials and workmanship.
Can I obtain replacement parts for the J627T?
Yes, replacement parts such as thermostats and heating elements are available. Contact Hubbell customer service or authorized parts distributors.
User questions about J627T Hubbell
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual J627T - Hubbell and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. J627T by Hubbell.