IPC30SA4A-E1 - Lighting Cotech - Free user manual and instructions

Product Type	LED Floodlight
Model	IPC30SA4A-E1
Brand	Cotech
Category	Lighting
Power Source	230V AC, 50Hz
Power Consumption	30W
Light Source	LED (integrated)
Luminous Flux	2400 lm
Color Temperature	4000K (neutral white)
Beam Angle	120°
IP Rating	IP65 (dust and water jet proof)
Material	Aluminum housing with tempered glass
Dimensions (L x W x H)	200 x 180 x 50 mm
Weight	0.6 kg
Mounting Type	Wall or ceiling mount (bracket included)
Operating Temperature	-20°C to +40°C
Lifetime	30,000 hours
Dimmable	No
Suitable for Outdoor Use	Yes
Energy Efficiency Class	F
Protection Class	I (requires earthing)
Main Functions	Basic on/off operation via switch or circuit breaker
Entretien et nettoyage	Clean with a dry or slightly damp cloth. Do not use abrasive or chemical cleaners.
Sécurité	Do not cover the luminaire. Ensure proper ventilation. Disconnect power before cleaning or maintenance.
Pièces détachées et réparabilité	No user-replaceable parts. In case of failure, the entire unit must be replaced. Contact authorized service.
Informations générales	Conforms to CE standards, RoHS compliant. Suitable for indoor and outdoor use.

Frequently Asked Questions - IPC30SA4A-E1 Cotech

Can the IPC30SA4A-E1 be used outdoors?

Yes, it has an IP65 rating, making it dust-tight and protected against water jets. Suitable for outdoor installation.

Is this floodlight dimmable?

No, the IPC30SA4A-E1 is not dimmable. It operates at full brightness only.

What is the power consumption?

It consumes 30 watts of power, providing a luminous flux of 2400 lumens.

What color temperature does the light have?

The light emits a neutral white color temperature of 4000K.

How do I install this floodlight?

Mount the bracket on a wall or ceiling, connect the wires (L, N, and earth) to a 230V supply, and secure the light onto the bracket. Ensure power is off during installation.

What is the beam angle?

The beam angle is 120 degrees, providing a wide spread of light.

What are the dimensions and weight?

Dimensions are 200 x 180 x 50 mm and it weighs 0.6 kg.

Can I replace the LED if it fails?

No, the LED is integrated and not replaceable. The entire fixture must be replaced if the LED fails.

Does it come with a warranty?

Yes, typically a 2-year warranty is provided. Check your purchase documentation for details.

How should I clean the floodlight?

Use a dry or slightly damp cloth. Avoid solvents or abrasive cleaners. Always disconnect power before cleaning.

USER MANUAL IPC30SA4A-E1 Cotech

30 W LED Tripod Work Light

Art.no 18-1403 Model IPC30SA3A-E1UK

36-7022

IPC30SA4A-E1

Please read the entire instruction manual before use and then save it for future reference. We reserve the right for any errors in text or images and any necessary changes made to technical data. In the event of technical problems or other queries, please contact our Customer Services.

Safety

• This product is extremely bright. Do not look directly into the light, doing so could cause eye damage.
• Never let children play with the product.
• The product must only be connected to an electrical socket with a 230 V power supply.
• The product must not be used in rooms where explosive gases or liquids are used or stored.
• Treat the product with care and do not subject it to shocks or impacts.
• Never immerse the product in water or other liquid.
  • The product must not be covered.
• Never try to open the housing, repair or modify the product in any way.
• Never use the product if your hands are moist or wet.
• Never use the product if it, its mains lead or plug is damaged in any way.
• All repairs must be carried out by qualified service technicians using genuine spare parts.
• The mains lead should be checked regularly. If the mains lead is damaged in any way it must be replaced by a qualified electrician.

The light source of the light fitting must only be replaced by a qualified electrician.

Product description

1. [I/0] On/off switch
2. 2 × 230 V power socket
3. Adjustment screws (one on each side)
4. Fastening screw

Art.no: 36-7022 Art.no: 18-1403

1. Height adjustment lock
2. Leg lock knob
3. Cable holder

Instructions for use

1. Open out the legs of the tripod and lock them in place by tightening the lock knob (6).
2. Adjust the tripod to the desired height and tighten the adjustment locks (5).
3. Mount the work light onto the tripod and secure it using the fastening screw (4).
4. Connect the mains lead to a 230 V power point.
5. Undo the adjustment screws (3) and set the desired angle.
6. Switch the work light on using the power switch (1).
7. Switch off and unplug the work light after use.

Power sockets (Art.no: 36-7022)

△ Important:

If any power tools are connected to the power sockets (2), the total combined load must not exceed 2300 W.

The power switch next to the sockets only controls the work light, not the power sockets.

Care and maintenance

- Switch the work light off and unplug it from the electrical outlet before wiping it clean with a dry cloth.

- △ Important: If the glass on the front of the work light is damaged, it must be replaced before the light is used again. The work light must not be used if the glass is damaged or missing.

Responsible disposal

This symbol indicates that this product should not be disposed of with general household waste. This applies throughout the entire EU. In order to prevent any harm to the environment or health hazards caused by incorrect waste disposal, the product must be handed in for recycling so that the material can be disposed of in a responsible manner. When recycling the product, take it to your local collection facility or contact the place of purchase. They will ensure that the product is disposed of in an environmentally sound manner.

Specifications

Rated voltage 220–240 V AC, 50/60 Hz

Power 30 W

Power sockets Max 2300 W combined total (Art.no: 36-7022)

Colour Black

Light source COB-LED, 2600 lm

Colour temperature 4000 K

Colour rendition > 80 Ra

Beam angle 120°

IP rating IP44

Operating temperature -20 to 40 °C

Mains cable 2.8 m, H07RN-F 3G1.5 mm² (Art.no: 36-7022) 2.8 m, H05RN-F 3G1.0 mm² (Art.no: 18-1403)

Work light size 17.5 × 14.5 × 13 cm

Max tripod height 180 cm

Art nr: 36-7022 Art nr: 18-1403

Användning

Art.nr: 36-7022 Art.nr: 18-1403

Bruk

Tuotenro: 36-7022 Tuotenro: 18-1403