ZFT916Y - Range hood ZANUSSI - Free user manual and instructions
Find the device manual for free ZFT916Y ZANUSSI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range hood |
| Brand | Zanussi |
| Model | ZFT916Y |
| Width | 90 cm |
| Depth | 50 cm |
| Height (min-max) | 60-110 cm |
| Weight | Approximately 17 kg |
| Power Supply | 230 V ~ 50 Hz |
| Rated Power | 250 W |
| Max Extraction Rate | 650 m³/h |
| Noise Level (max) | 65 dB(A) |
| Filter Type | Aluminum grease filter + optional charcoal filter |
| Lighting | 2 x 40 W halogen (or LED equivalent) |
| Controls | Electronic push buttons with 3 speeds |
| Installation Type | Wall-mounted or ducted/recirculating |
| Exhaust Diameter | 150 mm |
| Energy Class | A (estimation) |
| Grease Filter Cleaning | Washable in dishwasher or by hand |
| Charcoal Filter Replacement | Every 3-6 months |
| Safety Features | Auto shut-off, overheat protection |
| Spare Parts Availability | Yes, via authorized service centers |
| Repairability Index | 7.5 / 10 (estimated) |
Frequently Asked Questions - ZFT916Y ZANUSSI
How do I install the Zanussi ZFT916Y range hood?
Installation should be carried out by a qualified technician. Ensure the hood is at least 65 cm above gas hobs and 50 cm above electric hobs. Use the provided mounting kit and follow the user manual for ducting or recirculation setup.
How often should I clean the grease filter?
Clean the aluminum grease filter every month under normal use. It can be washed in a dishwasher at low temperature or by hand with mild detergent. Allow to dry completely before reinstalling.
How do I replace the charcoal filter?
Charcoal filters should be replaced every 3-6 months depending on usage. Open the grease filter grille, remove the old charcoal filter, and insert a new one. Ensure it locks into place. Only use genuine Zanussi filters.
What type of lighting does the ZFT916Y use?
The hood uses two halogen bulbs (40 W each) or LED equivalents. To replace, turn off power, remove the bulb cover, and replace with a bulb of the same type and wattage.
Why is my range hood not extracting properly?
Check that the grease filter is clean, the ducting is not blocked, and the charcoal filter (if used) is not saturated. Also ensure the hood is properly installed at the correct height. If problem persists, consult the troubleshooting section in the manual.
Can I use the hood without ducting?
Yes, the ZFT916Y can be used in recirculation mode with a charcoal filter. You will need to install the provided recirculation kit or purchase one separately. This mode filters and recirculates air back into the kitchen.
What is the maximum noise level?
The noise level reaches up to 65 dB(A) at maximum speed. For quieter operation, use lower speeds.
How do I reset the filter alarm?
After cleaning or replacing filters, press and hold the 'Filter Reset' button (if available) for 3 seconds until the indicator light turns off. Refer to the manual for specific model instructions.
Where can I buy spare parts?
Spare parts such as filters, bulbs, and control boards are available through Zanussi authorized service centers or online spare parts retailers. Use the model number ZFT916Y to ensure compatibility.
What is the warranty period?
Typically Zanussi offers a 2-year warranty for parts and labor, but this may vary by country. Register your product online to confirm coverage. Keep the purchase receipt as proof.
User questions about ZFT916Y ZANUSSI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual ZFT916Y - ZANUSSI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZFT916Y by ZANUSSI.