116C - Multimeter FLUKE - Free user manual and instructions
Find the device manual for free 116C FLUKE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Brand | Fluke |
| Model | 116C |
| AC Voltage Range | 0.1 mV to 600 V (True RMS) |
| DC Voltage Range | 0.1 mV to 600 V |
| Resistance Range | 0.1 Ω to 40 MΩ |
| Capacitance Range | 1 nF to 9999 µF |
| Frequency Range | 5 Hz to 50 kHz |
| Temperature Range | -40 °C to 400 °C (with included thermocouple) |
| Microamps (AC/DC) | 0.1 µA to 400 µA (for flame sensing) |
| Continuity Test | Yes, with audible beep |
| Diode Test | Yes |
| Low Impedance (LoZ) | Yes, for ghost voltage detection |
| Display | Digital LCD with backlight |
| Auto/Manual Range | Both |
| Min/Max/Average | Yes |
| Safety Rating | CAT III 600 V |
| Power Supply | 9 V battery (NEDA 1604A / IEC 6LR61) |
| Dimensions (H x W x D) | 167 mm x 84 mm x 46 mm |
| Weight | 400 g (including battery) |
| Accessories Included | Test leads, thermocouple (80BK-A), holster |
Frequently Asked Questions - 116C FLUKE
What is the Fluke 116C used for?
The Fluke 116C is a HVAC multimeter designed for heating, ventilation, air conditioning, and refrigeration systems. It includes microamps for flame sensor testing, temperature measurement, and capacitance for motor capacitors.
Does the Fluke 116C measure temperature?
Yes, it measures temperature from -40 °C to 400 °C using the included 80BK-A thermocouple probe.
What is the battery type and how long does it last?
The Fluke 116C uses a standard 9V battery (NEDA 1604A). Battery life is typically 400 hours in continuous operation without backlight.
Is the Fluke 116C True RMS?
Yes, it measures AC voltage and current with True RMS, providing accurate readings on non-sinusoidal waveforms common in HVAC equipment.
What safety ratings does the Fluke 116C have?
It is rated CAT III 600 V for protection against transient surges in fixed installations.
How do I measure microamps for flame sensors?
Set the rotary dial to the μA position. Connect the test leads in series with the flame sensor. Press the yellow button to toggle between AC and DC if needed.
Can I measure capacitance with this meter?
Yes, the Fluke 116C measures capacitance from 1 nF to 9999 µF, ideal for testing start/run capacitors.
What does the LoZ (Low Impedance) mode do?
LoZ mode applies a low impedance load to the circuit to eliminate ghost voltages (stray voltages from adjacent circuits) for more accurate AC voltage readings.
How do I replace the battery?
Turn off the meter, remove the holster (if attached), unscrew the battery door screw, lift the door, replace the 9V battery, and reassemble.
What is included with the Fluke 116C?
The package includes the meter, TL75 test leads, 80BK-A temperature probe, holster, 9V battery, and user manual.
User questions about 116C FLUKE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multimeter in PDF format for free! Find your manual 116C - FLUKE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 116C by FLUKE.