VT-PTZ220NP - Security Camera Vitek - Free user manual and instructions
Find the device manual for free VT-PTZ220NP Vitek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | PTZ Security Camera |
| Model | VT-PTZ220NP |
| Brand | Vitek |
| Image Sensor | 1/2.8" Progressive Scan CMOS |
| Effective Pixels | 1920 x 1080 (2MP) |
| Minimum Illumination | 0.01 Lux (Color), 0 Lux (IR on) |
| Shutter Speed | 1/1 ~ 1/30,000 s |
| Lens | 4.7~94mm, 20x Optical Zoom |
| Field of View | Horizontal: 58.9° (Wide) ~ 3.1° (Tele) |
| Pan & Tilt Range | Pan: 360° Continuous, Tilt: -5° ~ 90° |
| Pan/Tilt Speed | Pan: 0.1°~300°/s, Tilt: 0.1°~200°/s |
| IR Distance | Up to 100m |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| Max. Resolution | 1920 x 1080 @ 30fps |
| Network Interface | 1x RJ45 10/100M Ethernet |
| Audio Interface | 1ch Line In, 1ch Line Out |
| Alarm Interface | 1ch Alarm In, 1ch Alarm Out |
| Storage | MicroSD Slot (Max 256GB) |
| Power Supply | DC 12V ± 10%, 2A |
| Power Consumption | ≤ 18W (Heater & IR on) |
| Dimensions (ΦxH) | 200mm x 300mm |
| Weight | 2.5 kg |
| Operating Temperature | -30°C ~ 60°C |
| Ingress Protection | IP66 |
| Mount | Ceiling / Wall Mount Bracket Included |
Frequently Asked Questions - VT-PTZ220NP Vitek
How do I reset the camera to factory settings?
Press and hold the Reset button (located on the camera base) for 10 seconds using a paperclip. The camera will reboot and restore all settings to default.
What is the default IP address and login credentials?
Default IP address is 192.168.1.108. Username: admin, Password: 12345 (case-sensitive). Change the password after first login for security.
Can I view the camera on my smartphone?
Yes. Download the Vitek app or use a compatible third-party app like iVMS-4500. Scan the QR code on the camera or add it by IP address over Wi-Fi or cellular data.
How do I enable night vision?
Night vision activates automatically in low-light conditions. You can manually switch to IR mode via the web interface under Image > Day/Night Switch. Ensure the IR LEDs are not obstructed.
What is the maximum SD card capacity supported?
The camera supports microSD cards up to 256GB. Format the card to FAT32 before use. Insert the card into the slot under the camera dome.
How do I clean the camera lens and housing?
Use a soft, dry microfibre cloth to gently wipe the lens. For the housing, use a damp cloth with mild soap; avoid solvents. Ensure the camera is powered off and dry before reconnecting.
Can I set up motion detection alerts?
Yes. In the web interface, go to Events > Motion Detection. Draw a detection area and set sensitivity. Configure email alerts or FTP upload to receive notifications.
What is the warranty period for this camera?
Vitek offers a 3-year limited warranty for the VT-PTZ220NP. Register your product on the Vitek website within 30 days to activate coverage.
How do I perform a firmware update?
Download the latest firmware from the Vitek support page. Login to the camera web interface, go to System > Upgrade, select the file, and click Upgrade. Do not power off during update.
Can I use the camera outdoors without a housing?
The camera has an IP66 rating, meaning it is dust-tight and protected against water jets. It can be used outdoors directly, but avoid submerging or installing in areas with corrosive chemicals.
User questions about VT-PTZ220NP Vitek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual VT-PTZ220NP - Vitek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VT-PTZ220NP by Vitek.
