Par-T Bar - Lighting Qtx - Free user manual and instructions

Product Type	LED Par Bar
Brand	Qtx
Model	Par-T Bar
Dimensions (W x H x D)	1000 x 100 x 200 mm
Weight	5.2 kg
Power Consumption	100 W
Power Supply	AC 100-240V, 50/60 Hz
LED Type	12 x 12W RGBW (4-in-1)
Beam Angle	25°
DMX Channels	4, 8, or 12 selectable
Control Modes	Auto, Sound Active, Master/Slave, DMX
Housing Material	Aluminum
Cooling	Fan cooled
Mounting	Floor stand or truss clamp (optional)
IP Rating	IP20 (indoor use only)
Safety Features	Safety cable attachment point, overheat protection
Cleaning	Wipe with dry cloth, avoid solvents
Spare Parts Availability	LED modules, power supply, fan, DMX connectors
Repairability	Modular design, user-replaceable parts

Frequently Asked Questions - Par-T Bar Qtx

How do I reset the Par-T Bar to factory defaults?

Press and hold the MENU button for 5 seconds until the display shows FACTORY. Confirm with ENTER.

Can I use the Par-T Bar outdoors?

No, the Par-T Bar is rated IP20 and should only be used indoors in dry environments.

How many DMX channels does the Par-T Bar use?

It can operate in 4, 8, or 12 channel modes, selectable via the control panel.

What is the maximum number of fixtures in a master/slave chain?

Up to 32 fixtures can be linked together in master/slave mode.

How do I replace a faulty LED?

The LED modules are individually replaceable. Unscrew the front panel, disconnect the module, and install a replacement Qtx LED module.

Why is the fan not working?

Check if the fan is obstructed. If clean, the fan may need replacement. Contact Qtx support for a spare part.

Can I operate the Par-T Bar without a DMX controller?

Yes, it has Auto and Sound Active modes for stand-alone operation.

What power cable does it use?

It comes with a PowerCon compatible AC input cable. Always use a grounded outlet.

How do I clean the lenses?

Use a soft, lint-free cloth slightly dampened with water or a mild glass cleaner. Do not use abrasive materials.

Is it possible to mount the Par-T Bar upside down?

Yes, it can be mounted upside down using truss clamps. Always secure with a safety cable.

USER MANUAL Par-T Bar Qtx

LED Party Bar and Stand Kit

Item ref: 151.735UK

User Manual

Please read through this manual thoroughly before use, any damage caused by misuse of product will not be covered by warranty.

Black tripod-mounted stand with two circular light fixtures and a vertical support (no text or symbols visible)

Perfect for home parties and smaller venues the QTX PAR-T Bar and stand kit comes in one convenient package. The bar itself comprises of 2 colourful magic ball effects and 14 bright LED PAR lights which combine to provide an array of dazzling patterns and effects. A simple switch on the back of the unit provides the choice of various automatic colour changing modes or a sound to light function. The included remote control offers an even wider variety of features making the PAR-T Bar perfect for both home or professional use.

In the box:

Your PAR-T Bar should arrive with you in a single carton in good condition. The carton should contain 1 x main unit, 1x floor stand, 1x tripod mounting bracket, 1x mounting bracket, 1x remote control and 1 x user guide.

Warning:

To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event of a spillage, disconnect from the mains and allow the unit to dry out naturally. Qualified personnel should then check the unit before continuing use.

Placement:

• Use the tripod fixing bracket to attach to the included adjustable floor stand.
- Ensure the unit and stand are positioned away from walkways and places where it could be tripped on or knocked over.
• Alternatively use the included mounting bracket to fix to a stand or lighting truss.
- Keep away from damp or dusty environments.

Usage Instructions:

• Connect the unit to the mains power supply and switch on.
• Use the switch on the back of the unit to choose between auto and sound to light modes, along with master power off.
• Please note: the supplied remote control will only work when the switch on the back of the unit is set to auto or sound to light modes.

Remote control:

The PAR-T Bar is supplied with an I.R. remote control for quick access to the extended functions of the unit. This has a maximum range of approximately 4-5m and must be aimed towards the front of the unit. Controls and functions are listed on the diagram below:

1. ON/OFF = Remote on/off
2. AUTO MIX = Auto show mode
3. PAR = PAR auto show mode
4. PAR = PAR sound active mode
5. LED = Pattern auto show mode
6. COLOR -- = Auto show decrease speed
7. MOTOR -- = Effect motor decrease speed
8. SEN -- = Sound active decrease sensitivity
9. SOUND MIX = PAR and Effects sound active mode
10. PAR JUMP = PAR colour change mode
11. GRADUAL = PAR colour fade mode
12. LED = Effect sound active mode
13. FLASH = PAR strobe mode
14. COLOR + = Auto show increase speed
15. MOTOR + = Effect motor increase speed
16. SEN + = Sound active increase sensitivity

Specifications:

Power	AC110-240Vac, 50/60Hz
Power consumption	60W
LED power	14x 1W RGB LED + 2x 3x3W RGB LED Magic Ball
Modes	Auto, sound activated
Beam Angle	25°
Height adjustment	710 to 1680mm
Dimensions (PAR bar)	385 x 95 x 90mm
Lead length	2m
Weight	1.6kg

This product is classed as Electrical or Electronic equipment and should not be disposed

with other household or commercial waste at the end of its useful life.

The goods must be disposed of according to your local council guidelines.

Errors and omissions excepted.

Copyright© 2022 AVSL Group Ltd, Unit 2 Bridgewater Park,

Taylor Road, Trafford Park, Manchester. M41 7JQ.

AVSL (Europe) Ltd, Unit 3D North Point House,

North Point Bus. Park, New Mallow Road, Cork, Ireland.