BT-16S - Bluetooth speaker Boytone - Free user manual and instructions

Product Type	Portable Bluetooth Speaker with Karaoke and FM Radio
Brand	Boytone
Model	BT-16S (Bluetooth ID: T16)
Power Output	7W
Frequency Response	100Hz - 20KHz
Signal-to-Noise Ratio	≥75dB
Battery Capacity	3.7V 1800mAh
Input Voltage	DC 5V
Playback Sources	Bluetooth, USB, TF Card, AUX, FM Radio
Karaoke Function	Yes, with two microphone inputs (6.5mm and 3.5mm)
Recording Function	Yes (via REC button, requires USB or TF card)
Equalizer Modes	Off, Normal, Pop, Jazz, Rock, Classic
Remote Control	Included with full functionality
Display	Digital LED Display
Ambient Lighting	Blue and gold LEDs (switchable)
Microphone Inputs	MIC1: 6.5mm wired, MIC2: 3.5mm wired
USB Port	For USB flash drive
TF Card Slot	For TF memory card
AUX Input	3.5mm stereo audio cable
Charging Port	DC 5V (dedicated port)
Included Accessories	User Manual, 3.5mm Audio Cable, Remote Control, Belt
Maintenance	Wipe with a soft dry cloth; avoid moisture

Frequently Asked Questions - BT-16S Boytone

How do I connect the speaker via Bluetooth?

Turn on the speaker. Activate Bluetooth on your device (phone/tablet). Select T16 from the list. If prompted, enter password 0000.

How can I switch between different playback modes?

Press the Mode button on the speaker or remote to cycle through Bluetooth, USB, TF Card, AUX, and FM modes.

How do I play music from a USB drive or TF card?

Insert the USB drive or TF card into the corresponding slot. Press Mode to select USB or TF mode. Playback starts automatically. Use Previous/Next buttons to change tracks.

How do I use the FM radio function?

Press Mode until you reach FM mode. Long press the Play/Pause button to auto-search and store stations. Short press Previous/Next to tune stored stations.

Can I use a microphone with this speaker?

Yes, the speaker has two microphone inputs: MIC1 (6.5mm) and MIC2 (3.5mm). Connect a wired microphone to either for karaoke.

How does the recording function work?

Insert a USB or TF card. Long press the REC button to start recording (voice prompt). Short press REC again to play back the recording.

How do I adjust the volume?

Use the Volume knob on the speaker for master and mic volume. The remote control also has Vol+ and Vol- buttons.

What does the remote control do?

The remote allows you to power on/off, change modes, control playback, adjust volume, select EQ, and more. Refer to the manual for full button functions.

How do I charge the speaker?

Connect the included charging cable (or any standard USB cable) to the DC 5V charging port on the speaker. Use a 5V USB charger (not included). The battery is 1800mAh.

How long does the battery last?

Battery life depends on volume and usage. With a 1800mAh battery, expect approximately 3-5 hours of playback at moderate volume.

USER MANUAL BT-16S Boytone

Black portable electronic device with blue and gold ambient lighting, featuring a digital display and control buttons (no visible text or symbols)

Dear user:

Thank you for choosing our company's professional active audio products, the speaker is specifically design and produce for exercise, fitness, dance, opera, music, shopping guide, which are widely used in schools, shopping malls, indoor and outdoor activities. The sound is clear and in good quality. It has many advantages such as long working time, stable performance, convenient operation and so on, which is a good partner of your work and life.

THE PRODUCT FEATURES

1. Portable Shoulder USB/TF Card, Bluetooth Speaker
2. Play MP3 format music from TF card, U disk Connect 3.5mm stereo audio cable to speaker socket "AUX IN", can enjoy the music from mobile phone, MP3, MP4, PC, IPOD and other audio devices
3. With FM Function
4. With Karaoke Function
5. With high-pitched voice

DIRECTORY

1. The product features .... 1
2. Technical parameters....2
   3.Packing list....2
3. Connect using bluetooth technology....3
4. The function instructions....3
   6.The remote instructions 4

TECHNICAL

1. Power output 7W
2. Frequency Response.....100Hz-20KHz
3. S/N Radio.....≥75dB
4. Battery capacity....3.7V 1800mAh
5. Input voltage..... DC 5V

PACKING LIST

1. Host ....1PC
2. User Manual....1PC
3. 3.5mm Audio cable ....1PC
4. Remote control ....1PC
5. Belt 1PC

CONNECT USING BLUETOOTH TECHNOLOGY

1. Turn ON the unit
2. Activate the Bluetooth function on your Bluetooth Device (Mobile phone or Tablet).
   3.Once you have activated Bluetooth on your device,select the"T16"from the list of available Bluetooth devices.
3. If required, enter the password "0000" to confirm pairing.

Function operational specification :

1. MIC1: 6.5mm wired microphone socket
2. DC 5V: Charging port
3. AUX :Socket for 3.5mm audio cable
4. MIC2:Socket for 3.5mm Micphone
5. TF Card:Socket for TF card
6. USB:Socket for USB driver
7. Mode: Press this button to switch between Bluetooth/USB/TF Card/AUX and FM modes. Long press for speaker LED lights switch on/off
8. REC: After you insert a USB or TF card, short press this button, it will play the recording files of the flash. Long press this button, it starts recording (Indication voice recording), you can use a inserted microphone to record the sound out from microphone, Short press it again, it will play the recording file you just did.
   9.EQ:EQ mode from Off/Normal/Pop/Jazz/Rock/Class
9. Previous song under USB/TF/Blutooth mode. In FM radio mode, short press for previous station stored.
   11.Play/Pause: Short press for play and pause under USB/TF/Bluetooth mode. Under FM radio mode, Long press to start auto-search stations, Long press again to stop auto-search.
10. Next song under USB/TF/Blutooth mode. In FM radio mode, short press for next station stored.
11. Volume knob: Volume Knob for master volume and mic volume.
12. Display: Digital LED display.

The Remote Instructions

1. POWER: To turn the unit on for music playback or standby mode

2. :When playback from the USB/SD source, pressing this button to set repeat playback setting (Single, random, All track repeat).

3.MODE: Change the playback source mode of Bluetooth/AUX/FM/USB/TF

1. Previous song for USB/Micro SD playback mode.Previous channel for radio mode.

2. Next song for USB/Micro SD playback mode. Next channel for Radio Mode

3. EQ: Under USB/TF source playback mode, press to select different EQ hearing

4. During USB/SD/Bluetooth playback mode, press this button to pause the playback. Short again to resume playback. During FM radio mode, Long press to start auto-scan stations. Then Long press it again to stop the auto-scan during the auto-scan step.

5. Volume decrease.

6. Volume increase.

7. :Pressing this button to mute the unit's speaker output at anytime. Press again to resume speaker output.

8. The number keys 0-9: During USB/SD playback mode, press the number combination to designate that song number to start playback. During Radio Channel or Radio Frequency mode, press the number combination to select the Channel number to play. (Note: When done pressing the number combination, just wait 2 seconds and the system will automatically confirm your input).

9. STOP: When the unit is operating USB/SD playback mode, press this button to permanently stop playing the source file. You need to press to restart playback.