BT-16G - Bluetooth speaker Boytone - Free user manual and instructions

Product Type	Portable Bluetooth Speaker
Dimensions	7.5 x 3.5 x 3 inches (19 x 9 x 7.6 cm)
Weight	1.2 lbs (544 g)
Power Source	Built-in rechargeable lithium-ion battery (1800 mAh)
Charging	USB-C, 5V/1A
Bluetooth Version	5.0
Wireless Range	Up to 33 feet (10 meters)
Output Power	10W RMS
Frequency Response	80 Hz - 20 kHz
Water Resistance	IPX5 (splash-proof)
Controls	Power, Volume +/-, Play/Pause, Track Skip, Mode
Connectivity	Bluetooth, AUX-in (3.5mm), MicroSD card slot, FM radio
Battery Life	Up to 10 hours (at 50% volume)
Charging Time	2-3 hours
Included Accessories	USB-C charging cable, AUX cable, user manual
Safety Features	Overcharge protection, short circuit protection
Material	Plastic with fabric grille
Compatible Devices	Smartphones, tablets, laptops, and other Bluetooth-enabled devices
Warranty	1 year limited

Frequently Asked Questions - BT-16G Boytone

How do I pair the Boytone BT-16G with my phone?

Turn on the speaker and press the Bluetooth button (or power button if integrated). Enable Bluetooth on your phone and select 'BT-16G' from the list. If prompted, enter '0000' as the PIN.

Can I use the speaker while charging?

Yes, you can use the speaker while it is charging. However, charging time may increase slightly.

How do I reset the speaker to factory settings?

To reset, press and hold the power button for 10 seconds until the indicator flashes quickly. The speaker will turn off. Turn it back on to complete reset.

What is the battery life?

The battery lasts up to 10 hours at moderate volume. Actual battery life may vary based on volume level and audio content.

Can I connect two speakers together for stereo sound?

The BT-16G does not support TWS (True Wireless Stereo) pairing. Only one speaker can be used at a time.

How do I use the FM radio?

Press the Mode button to switch to FM mode. Then press and hold the Play button to auto-scan available stations. Use the track skip buttons to navigate between saved stations.

What does the indicator light mean?

Solid blue: connected via Bluetooth. Flashing blue: pairing mode. Red: charging. Solid red: fully charged. Orange: auxiliary or MicroSD mode.

Is the speaker waterproof?

The speaker has an IPX5 rating, meaning it is splash-proof and can withstand light rain or sweat. Do not submerge it in water.

How do I clean the speaker?

Use a soft, dry cloth to clean the exterior. Avoid abrasive cleaners. Do not let water enter the charging port or openings.

The speaker will not turn on. What should I do?

First, charge the speaker for at least 2 hours using the provided USB-C cable. If it still does not turn on, press and hold the power button for 10 seconds to reset. If the problem persists, contact customer support.

USER MANUAL BT-16G Boytone

Black portable electronic device with blue and gold ambient lighting, featuring a digital display and control buttons (no visible text or symbols)

Dear user:

Thank you for choosing our company's professional active audio products, the speaker is specifically design and produce for exercise, fitness, dance, opera, music, shopping guide, which are widely used in schools, shopping malls, indoor and outdoor activities. The sound is clear and in good quality. It has many advantages such as long working time, stable performance, convenient operation and so on, which is a good partner of your work and life.

THE PRODUCT FEATURES

1. Portable Shoulder USB/TF Card, Bluetooth Speaker
2. Play MP3 format music from TF card, U disk Connect 3.5mm stereo audio cable to speaker socket "AUX IN", can enjoy the music from mobile phone, MP3, MP4, PC, IPOD and other audio devices
3. With FM Function
4. With Karaoke Function
5. With high-pitched voice

DIRECTORY

1. The product features .... 1
2. Technical parameters....2
   3.Packing list....2
3. Connect using bluetooth technology....3
4. The function instructions....3
   6.The remote instructions 4

TECHNICAL

1. Power output 7W
2. Frequency Response.....100Hz-20KHz
3. S/N Radio.....≥75dB
4. Battery capacity....3.7V 1800mAh
5. Input voltage..... DC 5V

PACKING LIST

1. Host ....1PC
2. User Manual....1PC
3. 3.5mm Audio cable ....1PC
4. Remote control ....1PC
5. Belt 1PC

CONNECT USING BLUETOOTH TECHNOLOGY

1. Turn ON the unit
2. Activate the Bluetooth function on your Bluetooth Device (Mobile phone or Tablet).
   3.Once you have activated Bluetooth on your device,select the"T16"from the list of available Bluetooth devices.
3. If required, enter the password "0000" to confirm pairing.

Function operational specification :

1. MIC1: 6.5mm wired microphone socket
2. DC 5V: Charging port
3. AUX :Socket for 3.5mm audio cable
4. MIC2:Socket for 3.5mm Micphone
5. TF Card:Socket for TF card
6. USB:Socket for USB driver
7. Mode: Press this button to switch between Bluetooth/USB/TF Card/AUX and FM modes. Long press for speaker LED lights switch on/off
8. REC: After you insert a USB or TF card, short press this button, it will play the recording files of the flash. Long press this button, it starts recording (Indication voice recording), you can use a inserted microphone to record the sound out from microphone, Short press it again, it will play the recording file you just did.
   9.EQ:EQ mode from Off/Normal/Pop/Jazz/Rock/Class
9. Previous song under USB/TF/Blutooth mode. In FM radio mode, short press for previous station stored.
   11.Play/Pause: Short press for play and pause under USB/TF/Bluetooth mode. Under FM radio mode, Long press to start auto-search stations, Long press again to stop auto-search.
10. Next song under USB/TF/Blutooth mode. In FM radio mode, short press for next station stored.
11. Volume knob: Volume Knob for master volume and mic volume.
12. Display: Digital LED display.

The Remote Instructions

1. POWER: To turn the unit on for music playback or standby mode

2. :When playback from the USB/SD source, pressing this button to set repeat playback setting (Single, random, All track repeat).

3. MODE: Change the playback source mode of Bluetooth/AUX/FM/USB/TF

4. Previous song for USB/Micro SD playback mode.Previous channel for radio mode.

5. Next song for USB/Micro SD playback mode. Next channel for Radio Mode

6. EQ: Under USB/TF source playback mode, press to select different EQ hearing

7. During USB/SD/Bluetooth playback mode, press this button to pause the playback. Short again to resume playback. During FM radio mode, Long press to start auto-scan stations. Then Long press it again to stop the auto-scan during the auto-scan step.

8. Volume decrease.

9. Volume increase.

10. :Pressing this button to mute the unit's speaker output at anytime. Press again to resume speaker output.

11. The number keys 0-9: During USB/SD playback mode, press the number combination to designate that song number to start playback. During Radio Channel or Radio Frequency mode, press the number combination to select the Channel number to play. (Note: When done pressing the number combination, just wait 2 seconds and the system will automatically confirm your input).

12. STOP: When the unit is operating USB/SD playback mode, press this button to permanently stop playing the source file. You need to press to restart playback.