Power DCS2V1MP - Humidifier VAX - Free user manual and instructions

Product Type	Ultrasonic Humidifier
Model	Power DCS2V1MP
Brand	Vax
Water Tank Capacity	2.5 L
Coverage Area	Up to 25 m²
Mist Output	250 ml/h
Runtime (max)	10 hours
Power Consumption	25 W
Noise Level	≤ 35 dB
Dimensions (H × W × D)	30 × 20 × 20 cm
Weight	1.2 kg
Water Type	Tap water (demineralized recommended)
Mist Modes	Adjustable (low/high)
Auto Shut-Off	When tank is empty
Indicator Light	Power and water level
Filter Type	Demineralization cartridge
Cleaning	Weekly with vinegar/water solution
Power Supply	220-240 V, 50/60 Hz
Included Accessories	Demineralization cartridge, cleaning brush

Frequently Asked Questions - Power DCS2V1MP VAX

How do I clean the Vax Power DCS2V1MP humidifier?

Unplug the unit. Remove the tank and empty any remaining water. Wipe the base and tank with a soft cloth dampened with a mixture of water and white vinegar. Rinse thoroughly. For mineral deposits, use the included cleaning brush. Replace the demineralization cartridge every 2-3 months.

Why is my humidifier not producing mist?

Check if the water tank is empty. Ensure the unit is properly assembled and the water tank is seated correctly. The mist output can be adjusted with the control dial. If still no mist, the ultrasonic plate may need cleaning or the demineralization cartridge may be clogged.

What type of water should I use?

You can use tap water, but for best performance and to reduce mineral buildup, we recommend using demineralized or distilled water. Avoid using essential oils in the water tank.

How often should I replace the demineralization cartridge?

The cartridge should be replaced every 2-3 months, depending on water hardness. If you notice white dust on surfaces, replace the cartridge sooner.

Can I use essential oils in the humidifier?

No, this humidifier is not designed for essential oils. Adding oils can damage the plastic parts and clog the mist output.

What is the coverage area of this humidifier?

The Vax Power DCS2V1MP is suitable for rooms up to 25 m². For optimal humidity levels, keep doors and windows closed.

Why does the humidifier emit a strange smell?

A musty smell indicates mold or bacteria. Clean the tank and base with a vinegar solution. If using the unit after a long period, run a cleaning cycle. Ensure the unit is dried before storage.

How do I adjust the mist level?

Turn the control knob on the front of the unit. Rotate clockwise to increase mist output, counterclockwise to decrease. The indicator light will show the setting.

Is the humidifier noisy?

The unit operates at a low noise level of ≤ 35 dB, similar to a quiet library. If you hear unusual noises, check if the tank is properly placed or if the water level is low.

What does the indicator light mean?

A steady blue light indicates normal operation. A blinking light or no light may indicate an empty tank or a malfunction. Refer to the user manual for specific codes.

USER MANUAL Power DCS2V1MP VAX

REDUCES MOISTURE FAST

LET'S GET STARTED.

Exterior view of a white industrial vacuum cleaner with control panel and warning icons (no readable text or symbols)

Basic safety precautions	This machine is intended for household use only and NOT for commercial or industrial use.Only use the appliance indoors and keep away from open external doors and windows.Keep fingers, hair and loose clothing away from moving parts and openings whilst using the appliance.This appliance can be operated by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.	Children shall not play with the appliance.Cleaning and user maintenance shall not be made by children without supervision.Always position the appliance on a flat, stable, solid surface and never over stretch the power cord.Always remove the water tank and drain the appliance before carrying or transporting.Position the appliance where air is not drawn across your body or head while sitting or sleeping.
Don'ts	Don't leave water stored in the water tank between uses.Don't cover the appliance with washed clothes or position under washed clothes as water may drip onto the appliance.Don't place the appliance near sources of heat, such as stove tops, ovens, radiators, open fires, candles or computers.Don't position the appliance underneath or near to smoke alarms.Don't move or tilt the appliance when in use. Leaking from the water tank may occur.Don't use the appliance if the power cord or plug is damaged. Please contact our Customer Service Line on: 0330 026 8455 (Mon-Fri 8:30am-6:30pm Sat 9:00am-5:00pm).Don't use the appliance if it has been dropped, damaged or left outdoors.	Don't run the power cord under rugs, runners or carpets as it can be a trip hazard.Don't pull, carry or trap the power cord under doors or sharp edges.Don't handle the plug or appliance with wet hands.Don't unplug the appliance by pulling on the power cord.Don't use the appliance in an area with toxic/explosive vapours/liquids, oxygen water tanks or near to flammable, combustible materials (lighter fluid, petrol, kerosene, chlorine, bleach and ammonia drain cleaner etc).Don't use the appliance with incorrect voltage as this may result in damage or injury to the user. The correct voltage is listed on the ratings label.Don't use without the filter in place.
Do's	Inspect the appliance regularly and remove any dust/dirt build up as this may affect the airflow.Keep all openings/grills clear and free from obstruction and sources of heat, open flames including candles. Don't attempt to remove blockages with sharp objects as this may cause damage to the appliance.Turn off all controls on the appliance before disconnecting or connecting the power cord.	Always replace the fuse in the plug with a 13amp fuse. Always protect the power cable from heat.Use only CE approved 13amp extension cords, non-approved extension cords may overheat.Care should be taken to arrange the extension cord as it can be a trip hazard.Always switch off and unplug the appliance before performing maintenance or troubleshooting checks.PLEASE KEEP INSTRUCTIONS FOR FURTHER USE.

Contents

Let's talk safety

Getting to know your machine

Getting started

Using your machine

Taking care of your machine

What to do if it goes wrong

Getting in touch

Dehumidifier

Included with your machine

Drainage hose

Taking care of you

We're here if you need us. Instead of taking me back to the shop, simply visit:

vax.co.uk/support or call

(UK) 0330 026 8455 (ROI) 1-800 928 308

Monday-Friday 8:30am to 6:30pm, Saturday 9:00am to 5:00pm

Calls are charged at the UK local rate. Please make a note of the serial number and model number of the product before calling.

Alternatively, you can write to us at:

Vax Ltd., Plot 302, Stonebridge Cross Business Park, Hampton Lovett, Droitwich, Worcestershire, WR9 0LW, UK

This user guide can be found online at: vax.co.uk/support

vax™

Let us know what you think @VaxUK

Getting to know your machine

Technical Specification

Model Number DCS2V1MP

Power Input Please refer to rating label

Rated frequency 50Hz

Input Voltage 220-240V

Tank Capacity 5.51

Moisture removal 16 Litres/Day

Weight 12.6kg

Subject to technical change without notice.

Model Number DCS3V1HP

Power Input: Please refer to rating label

Rated Frequency 50Hz

Input Voltage 220-240V

Tank Capacity 5.51

Moisture removal 20 Litres/Day

Weight 12.6kg

PLEASE READ 'LET'S TALK SAFETY' AT THE BEGINNING BEFORE USE

Before you begin

IMPORTANT: Remove all packaging covering the appliance. Make sure the water tank and filters are in place and correctly fitted. Stand the appliance upright or a stable, flat surface away from sources of heat or open windows. Never block the air grills, keep the air grills free from any obstruction. Never position the dehumidifier under washing to prevent water dripping onto the appliance.

IMPORTANT: Care should always be taken when using a dehumidifier in a new build home or if any internal plaster renovation has been carried out within the last 6 months.

We recommend using the appliance with the humidity dial set to high and gradually adjusted over a period of weeks to prevent excess over drying. Vax cannot be held responsible for any building damage as a result of improper use. Guidance should always be taken from you home builder.

For best performance position the appliance a safe distance away from walls, furniture and clothing with sufficient spacing as shown above, preferably a hallway or landing with the internal doors open.

Close-up of a gray electronic device control panel with buttons and indicators (no readable text or symbols)

Plug the denumidifier into the mains. The appliance will produce a 2-second audio sleep confirming there is power to the appliance. Press the oryof button on the control panel to switch the appliance on. The lon vit, activate and the Led light on the front of the appliance will illuminate.
Using the mode/programme button select one of the four programme options.

Using the control panel

The LED lights will illuminate over the function names when selected.

IMPORTANT: The control panel is touch sensitive, lightly press the controls. When the machine is activated the digital humidity reading of the room will be displayed.

Using your machine Using your machine

IMPORTANT: The control panel is touch sensitive, lightly press the controls. When the machine is activated, the digital humidity reading of the room will be displayed.

Using the Dehumidifier

Programme Options

Using the mode button choose one of the following four options:

Fan - This programme operates the dehumidifier in fan only mode (no moisture extraction, ideal for summer months when cenumidification is not required) to circulate air in the home or a room.

Clothes dry - This programme ignores room humidity levels and any settings selected and operates full extraction on high tan mode. This programme is best suited when drying clothes ideally in a small/medium sized room. This programme will run for 4 hours and will automatically switch off the appliance.

Daily This programme is specifically for humidification within the home. The user can automatically set humidity target from 80 - 30% and will regulate to rat level. The product will automatically adjust between high and low fan speed depending on the target humidity and actual humidity level difference.

Night - This programme is specifically for dehumidification at night. The user can automatically set the humidity target from 30 - 30% however the dehumidifier will only operate in low fan for night time use. The LED light will switch off and the audio rank full will be disobected so as not to disturb you during the night.

Using the control panel and setting the humidity

The target humidity levels can be adjusted on the daily and night programs which are automatic.

The humidity can be adjusted from 60 - 30% in 5% increments. Once the room humidity meets the set level, the appliance will automatically switch off and turn back on when needed to maintain this level. (The LED light on the front panel and the display lights on the control panel will remain on continuously).

To make this adjustment, use the ▲ and ▼ buttons. The display wish flash to indicate this target value and will then revert back to actual room humidity.

Using the Control panel and setting the time delay

The timer function allows you to switch the appliance of after a set number of hours. If this is not selected the appliance will run in continuous mode (with the exclusion of clothes drying).

Press the timer button. The display panel will then display '30'. Using the (▲) and ▼ buttons select the required amount of time up to a maximum of 24 hours. (The clothes drying mode can only be timed to a maximum of 17 hours). After 5 seconds of setting the timer, the display panel will never back to displaying the humidity of the room.

To display the remaining timed hours, press the timer button and the remaining hours will then appear on the display.

Smart Air Sensor technology

Your Vax dehumidifier automatically monitors the humidity in the room and adjusts the extraction rate accordingly, as well as changing the indicator light on the front of the machine.

Blue light - indicates when the room humidity is less than 50%

Green light - indicates when the room humidity is at an icedal humidity setting of between 50% - 70%

Rec light - indicates when the room humidity is very high, greater than 70%

Re: flashing light means the water tank is full and will need to be emptied out.

Using the Adjustable air outlet cover

The LED lights will illuminate over the function when selected

Exterior view of a modern air conditioner unit (no visible text or symbols)

The air cullet cover should always be open when the appliance is in use. Adjust the cover manually to direct the air to the preferred setting and to prevent, the least disruption to the surroundings.

Important: When the dehumidifier is first used it will produce a significant amount of water and the tank will need employing more frequently. As the room becomes drier, the dehumidifier collects less water and the tank takes longer to fill.

Always switch the appliance of and unplug from the mains when removing or refitting the water tank or filter and before carrying out any maintenance or troubleshooting checks.

Using the hose for continuous drainage (optional)

The water tank must remain filled to the appliance when using the hose for continuous drainage. Using the drainage hose will allow continuous enjoying of the dehumiliation, water will be directed out through the hose and will not correct within the internal water tank. The hose must be lower than the drainage port allowing the water to flow and prevent any flooding. Connect the hose to floor drain or stand pipe minking sure it is correctly secured.

Close-up of a white electronic device with a ventilation grille and a small handle (no visible text or symbols)

Using the release handles put either side of the water tank and remove the water tank from the back of the appliance.

Close-up of a wall-mounted device with a circular component above it (no visible text or symbols)

Attach the drainage hook to the water outlet. (I created behind the drainage port)

Close-up of a metallic panel with hexagonal grid pattern and a black cable (no text or symbols visible)

Ref: the water tank making sure the base lines up with the drainage port and does not become trapped.

Taking care of your machine Ta

IMPORTANT: Do not leave water stored in the water tank between uses.

Always switch the appliance off and unpug from the mains when removing or refiting the water tank or filter, and before carrying out any maintenance or troubleshooting checks.

Emptying the water tank

IMPORTANT: Do not attempt to remove the float from inside the tank.

When the water tank is full or incorrectly filled, the LED light on the front of the appliance will flash. The appliance will operate for several minutes and then shut down. The LED light will continue to flash.

Exterior view of a modern office building (no signage)

Using the release hendles out either side of the water tank and remove the water tank from the back of the appliance.

3D rendered model of a mechanical housing or enclosure with internal compartments and mounting points (no text or symbols visible)

Carry the water tank carefully by the handle. The water tank cava is no detectable.

3D rendering of a mechanical device casing with internal components (no visible text or symbols)

Empty the water tank over a sink and rinse tank. Wipe the outside of the tank with a clean dry cloth and refill tank.

Emptying the water tank

3D rendering of a gray plastic enclosure with internal cavities and mounting holes (no text or symbols)

With the water tank removed from the appliance gently pull one side of the water tank handle to detach from the water tank cover.
Pull and remove the other side of the hands from the cover.

3D rendering of a gray plastic enclosure or housing with internal compartments (no text or symbols visible)

Lift and remove the cover from the water tank

3D rendered mechanical part with a central spherical feature and side grooves (no text or symbols)

Rise the tank under water and wipe dry with a clean cloth.
Refit the water tank cover and the hands to secure cover into place.

Taking care of your machine Taking care of your machine

IMPORTANT: The filter should be cleaned every two weeks and replaced every 6 months dependant upon use.

Do not use the denumidifier without the filter being correctly fitted and in place.

The appliance is intended for household use only and should not be used in high costly environments such as during building or renovation work.

Note: For optimal performance regularly clean and maintain the filter.

Cleaning the filter

Close-up of a white industrial control panel with a grid of buttons and ventilation slots (no visible text or symbols)

I lift the air inlet grill/filter cover located on the back of the dehumidifier.

3D rendering of a rectangular plastic tray with a grid pattern and two side supports (no text or symbols)

Separate the filter and cover. Use a vacuum cleaner with a soft

Pure geometric grid pattern with no text, numbers, or symbols

dusting brush attached or "sp the ther over a pin to remove cus:
Wash the filter under running water (40 degrees max) Leave for 24 hours or until six days before refining.
Never place in a dishwasher to clear.

Cleaning the dehumidifier

Note: For optimal performance regularly clean and maintain the filter.

3D rendering of a gray rectangular electronic device with a top handle and ventilation slots (no text or symbols visible)

Keep at grills/boenings clear of dust and debris.
Wipe the denumdifier with a clean dry cloth.

Storage

If the appliance will, not be used for a long period of time:

• Unplug from the mains
• Empty the water tank and allow to dry before refitting
• Clean the filter
• Store the donumidifier in the upright position away from direct sunlight, at room temperature and where the appliance cannot freeze.

SolutionProblem

Why does my dehumidifier have no power?

The plug may not be fully pushed into the electrical socket.

Check the fuse in the bug if this needs replacing always replace with a 13amp British fuse.

Timer may have finished, re-set the timer. Go to 'Using your machine'. The water tank is full. Go to 'Taking care of my machine'.

Why is water leaking from my dehumidifier?

The machine has not been positioned correctly, place the machine on a fla, stable, sold surface. Go to 'Getting started'.

The drainage hose has not been correctly tilted. Go to 'Using your machine'. The machine has been moved or tilted with water in the water tank. Remove water tank and empty. Go to 'Taking Care of your machine'.

Why are the LED lights flashing red on the control panel?

The water tank is full. Go to 'Taking Care of your machine'. The water tank is incorrectly fitted. Refit the water tank.

Getting in touchWh

It's quick and easy to register for your FREE

2 year guarantee

Online at: vax.co.uk/guarantees

Please retain your original receipt for proof of purchase.

we're here if you need us

Online vax.co.uk/support

Call: (UK) 0330 026 8455 (ROI) 1-800 928 308

Monday Friday 8.30am to 6.30pm, Saturday 9.00am to 5.00pm

Alternatively, you can write to us at:

Vax Ltd, Plot 302, Stonebridge Cross Business Park, Hampton Lovett, Droitwitch, WR9 OLW, UK

† Registration required. Terms and conditions apply, see vax-cook for details.

* Cals are charged at the UK local rule. Please make a note of the serial number and model number of the product before calling.

GET IN TOUCH

0330 026 8455

[e-mail]

vax.co.uk

VaxVacuums

@VaxUK

EEC Statement of Compliance: Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the DCS2V1MP and DCS3V1HP are manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive. EMC: 2004/108/EC Electromagnetic Compatibility Directive.

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

© 2016 Vax Limited. All rights reserved. The VAX trade mark and Vax lozenge is the property of Techtronic Floor Care Technology Ltd and is registered in the EU and may be pending or registered in other countries.