F-801MAJ - Ice machine Hoshizaki - Free user manual and instructions
Find the device manual for free F-801MAJ Hoshizaki in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Modular Ice Machine |
| Brand | Hoshizaki |
| Model | F-801MAJ |
| Ice Production (per 24h) | Approx. 801 lbs (363 kg) |
| Ice Type | Crescent Cube |
| Condenser Type | Air-cooled |
| Dimensions (W x D x H) | 22 x 28.38 x 33.25 inches (559 x 721 x 845 mm) |
| Weight (Net) | Approx. 145 lbs (66 kg) |
| Power Supply | 115V / 60Hz / 1-Phase |
| Amperage | 12.0 A (running) |
| Water Supply | Potable water, 20-80 psi |
| Refrigerant | R-404A |
| Ice Storage Capacity | Not included (requires bin) |
| Controls | Electronic control board with on/off, clean cycle |
| Cleaning | Automatic cleaning cycle with approved cleaner |
| Safety Features | Overflow protection, low water cut-off, high-temperature cut-out |
| Warranty | 3 years parts and labor, 5 years compressor |
| Certifications | UL, NSF |
| Maintenance | Daily air filter check, periodic condenser coil cleaning |
Frequently Asked Questions - F-801MAJ Hoshizaki
How do I start the ice machine for the first time?
After connecting water and power, press the ON button. The machine will automatically fill the water trough and start the ice-making cycle. Ensure the water supply is on and the drain line is clear.
How often should I clean the Hoshizaki F-801MAJ?
Clean the machine every 6 months using Hoshizaki-approved ice machine cleaner. Use the automatic clean cycle by pressing and holding the CLEAN button until the indicator lights up.
What type of water is recommended?
Use potable water with pressure between 20 and 80 psi. Hard water may require a water filter to prevent scale buildup. Do not use distilled or deionized water.
Why is the ice machine not producing ice?
Check if the machine is in clean cycle mode, if the water supply is on, if the air filter is clean, and if the bin is full (if using a bin). Also ensure the condenser is not dirty.
How do I change the air filter?
The air filter is located on the front panel. Slide it out and wash with mild soap and water. Rinse thoroughly and let dry before reinstalling. Replace if damaged.
What does the 'ICE' indicator blinking mean?
A blinking ICE light usually indicates a need for cleaning or a safety shutdown. Refer to the manual for specific error codes. Try running a clean cycle first.
Can I use the machine with a remote condenser?
The F-801MAJ is designed as an air-cooled model. For remote condenser installation, consult Hoshizaki technical support; a different model may be required.
How do I drain the machine for winter storage?
Turn off the machine and disconnect power. Remove the drain plug at the bottom of the water trough. Allow all water to drain. Blow out lines with compressed air if needed.
What is the recommended ice storage bin size?
Use a bin with a minimum capacity of 400 lbs to accommodate the daily production. Ensure the bin has proper drainage and is compatible with modular ice machines.
How do I reset the machine after a power outage?
The machine will automatically resume operation after power is restored. If not, press the OFF button, wait 10 seconds, then press ON. If issues persist, check for error codes.
User questions about F-801MAJ Hoshizaki
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ice machine in PDF format for free! Find your manual F-801MAJ - Hoshizaki and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. F-801MAJ by Hoshizaki.