DS-2AE5232TI-A - Security Camera Hikvision - Free user manual and instructions
Find the device manual for free DS-2AE5232TI-A Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | Hikvision |
| Model | DS-2AE5232TI-A |
| Image Sensor | 1/2.8" Progressive Scan CMOS |
| Resolution | 5 Megapixels (2560 x 1920) |
| Lens | Motorized varifocal, 4.8-153mm |
| Optical Zoom | 32x |
| Night Vision | Up to 150m IR range |
| Pan Range | 360° endless |
| Tilt Range | -15° to 90° (auto-flip) |
| Protection Rating | IP66, IK10 |
| Power Supply | 24V AC / PoE+ (IEEE 802.3at) |
| Dimensions (D x H) | 228 x 298 mm |
| Weight | Approx. 3.5 kg |
| Operating Temperature | -40°C to 65°C |
| Storage Temperature | -40°C to 70°C |
| Network Protocols | IPv4/IPv6, HTTP, HTTPS, FTP, NTP, RTSP |
| Maintenance | Clean lens with soft cloth; check cables; |
| Security | Password protection, IP filtering, HTTPS encryption |
| Spare Parts | Power adapter, mounting bracket, screws (if lost, order from Hikvision) |
| Repairability | Modular design; contact authorized service center for repairs |
| General Information | Outdoor PTZ camera with Smart IR and intelligent motion detection |
Frequently Asked Questions - DS-2AE5232TI-A Hikvision
How do I reset the camera to factory defaults?
Press and hold the reset button on the camera housing for 10 seconds using a pin. The camera will reboot. Alternatively, access the web interface and go to Configuration > System > Maintenance > Factory Default.
What is the maximum number of users that can access the camera simultaneously?
The camera supports up to 15 simultaneous live view connections (depending on bandwidth). For recording, use NVR or Hik-Connect.
Can I use the camera without a network cable?
Yes, if powered by 24V AC, the camera can operate standalone with local recording via SD card slot (not included). However, network access requires Ethernet or Wi-Fi (models with Wi-Fi).
How do I install the camera on a wall?
Use the provided mounting bracket. Drill holes for screws based on the template, secure the bracket, then attach the camera. Ensure the surface can support at least 5 kg. For detailed steps, refer to the installation manual.
Does the camera support audio recording?
Yes, the DS-2AE5232TI-A has a built-in microphone for audio capture. You can enable audio in the configuration under Video/Audio settings.
What is the default IP address of the camera?
The default IP is 192.168.1.64. The default subnet mask is 255.255.255.0. You can find the IP via the SADP tool from Hikvision.
How do I enable motion detection alerts?
Go to Configuration > Events > Motion Detection. Enable motion detection, draw detection areas, and set actions like email alert or FTP upload. You can also link to alarm output.
What is the IR range and does it work in complete darkness?
The IR range is up to 150 meters. It works in total darkness thanks to Smart IR technology that adjusts intensity to avoid overexposure.
Can I use a third-party NVR with this camera?
Yes, the camera supports ONVIF Profile S/G/T, making it compatible with most third-party NVRs. Ensure the NVR supports the required resolution and streaming.
How do I clean the camera dome?
Use a soft, lint-free cloth slightly dampened with water or mild detergent. Do not use abrasive cleaners. Wipe gently to avoid scratching the dome. For outdoor units, clean regularly to prevent dirt buildup.
User questions about DS-2AE5232TI-A Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual DS-2AE5232TI-A - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-2AE5232TI-A by Hikvision.