MS08 - Lock Dormakaba - Free user manual and instructions

Product Type	Electronic Lock
Brand	Dormakaba
Model	MS08
Dimensions (H x W x D)	3.9 x 2.9 x 1.6 in (100 x 74 x 40 mm)
Weight	0.5 lb (220 g)
Power Supply	4 x AA batteries (6V DC)
Battery Life	Up to 1 year under normal use
Low Battery Warning	Audible beep and LED indicator
Keyless Entry Methods	PIN code (4-8 digits) and RFID tag
Maximum Number of User Codes	20
RFID Frequency	13.56 MHz
Material	Zinc alloy body, stainless steel latch
Security Grade	Grade 2 (ANSI/BHMA A156.25)
Weather Resistance	IP44 (suitable for covered outdoor use)
Operating Temperature	-4°F to 140°F (-20°C to 60°C)
Installation	Easy DIY, fits standard door prep (2-1/8" bore, 2-3/8" or 2-3/4" backset)
Maintenance	Clean with soft dry cloth; do not use solvents
Spare Parts Available	Batteries, mounting screws, RFID tags
Repairability	User-replaceable batteries; professional repair for electronics
Included Accessories	2 RFID tags, mounting hardware, installation manual
Warranty	1 year limited warranty

Frequently Asked Questions - MS08 Dormakaba

How do I install the Dormakaba MS08 lock?

The lock fits standard door prep with a 2-1/8" bore and 2-3/8" or 2-3/4" backset. Follow the included installation manual for step-by-step instructions. Ensure batteries are inserted correctly before mounting.

How do I change the batteries?

Remove the interior cover to access the battery compartment. Replace four AA batteries with new ones, observing polarity. The lock will emit a low battery warning when replacement is needed.

How do I add or delete a user code?

Enter programming mode by pressing the reset button inside. Then follow the manual to add or delete PIN codes. Up to 20 user codes are supported.

What should I do if the lock fails to operate?

First, check battery polarity and replace if low. Ensure the latch is aligned properly. If the issue persists, perform a factory reset by holding the reset button for 5 seconds.

Can the MS08 lock be used outdoors?

Yes, it has an IP44 rating, making it suitable for covered outdoor applications. Avoid direct exposure to heavy rain or extreme temperatures.

How do I program RFID tags?

Enter programming mode, then present an unregistered RFID tag near the reader. The lock will beep to confirm. Each tag can be assigned to a specific user. See manual for details.

What is the default master code?

The default master code is 1234. Change it immediately after installation for security. To change, enter programming mode and follow the master code change procedure.

How do I reset the lock to factory settings?

Locate the reset button (small pinhole) on the interior side. Use a paperclip to press and hold for 5 seconds. All user codes and tags will be erased, restoring defaults.

Is the lock compatible with smart home systems?

The MS08 is a standalone lock and does not support Wi-Fi or Bluetooth. However, it can be integrated with some access control systems via optional modules.

How do I clean and maintain the lock?

Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents. Periodically check battery contacts for corrosion and replace batteries annually.

USER MANUAL MS08 Dormakaba

MS08 touchless actuator

Automatic sliding & swinging doors

Description

The MS08 actuator utilizes proven microwave motion technology to ensure consistent, dependable touchless activation and can be adjusted to comply with ANSI knowing act applications.

The MS08 detects moving objects such as a hand, cart, or wheelchair and is ideal for use in hospitals, pharmacies, clean rooms, food service facilities, and other applications requiring a hygienic touchless activation method.

Features & benefits

• Detection zone from 4"-24" (pulse or toggle).
• Silent activation for hospitals and other noise-sensitive environments.
  • Water-resistant foam gasket provides increased reliability when exposed to liquid or cleaning products.
• Low profile, beveled design reduces chance of accidental damage in high traffic areas.
  • Available in black faceplate with options for single or double gang boxes.

Applications

Illustration of two people in a hallway, one seated in a wheelchair and the other walking away (no text or symbols visible)

Dual egress Sliding doors Industrial doors

Illustration of a person in green uniform standing near a doorway with red circular symbols (no text or numbers visible)

Swing doors

Isometric view of a warehouse interior with stacked boxes and a person walking (no text or symbols visible)

Illustration of a door with a green frame and a yellow interior, no text or symbols present

Technical specifications

Technology	Microwave doppler radar
Radiated frequency	24.125 GHz
Radiated power density	5 mW / cm2

Detection mode Motion (bi-directional)

Detection range 4" - 24" (adjustable)

Output	Relay with switch-over contact (voltage free)
Max. contact voltage	60 VDC / 125 VAC
Max. contact current	1 A (resistive)
Max. switching power	30 W (DC) / 60 VA (AC)

Output hold time 0.5 s (in pulsed mode)

Supply frequency 50 - 60 Hz

Supply voltage < 2.8 W 12 - 24 VAC ±10%

12 - 24 VDC 30% / -10%

Power consumption < 1.5 W

Material ASA, Nylon, PC

Cable type

Standard cable up to 16 AWG - 1.5 mm

Temperature range -4°F - 131°F (-20°C - 55°C)

Norm conformance EMC: 2004 / 108 / EC; FCC: G9B-MS08; IC: 4680A-MS08

MS08 dimensional drawings

Double gang

Single gang

Microwave cell

MS08 microwave touchless actuator

DX3339-007
SINGLE & DOUBLE
GANG FACEPLATES

dormakaba USA Inc.

Dorma Drive, Drawer AC

Reamstown, PA 17567

844-SPECNOW

www.dormakaba.us

dormakaba Canada

1680 Courtney Park Dr. Unit 13

Mississauga, ON L5T 1R4

800.387.4938

www.dormakaba.ca