E-Plex 5x86 - Lock Dormakaba - Free user manual and instructions
Find the device manual for free E-Plex 5x86 Dormakaba in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electronic Pushbutton Lock |
| Brand | Dormakaba |
| Model | E-Plex 5x86 |
| Category | Lock |
| Dimensions (W x H x D) | 3.0 x 8.0 x 2.5 in (76 x 203 x 64 mm) |
| Weight | 3.5 lb (1.6 kg) |
| Power Source | 4 AA alkaline batteries |
| Battery Life | Up to 360,000 cycles |
| Keypad Type | 12-button alphanumeric |
| User Codes | Up to 100 users |
| Lock Type | Bored cylindrical lockset |
| Handing | Field reversible (left/right) |
| Backset | 2-3/8 in or 2-3/4 in |
| Material | Zinc alloy with satin chrome finish |
| Security Grade | ANSI/BHMA Grade 1 |
| Audit Trail | Last 1,000 events |
| Maintenance | Clean with a damp, soft cloth; do not use abrasive cleaners |
| Included Accessories | Mounting screws, strike plate, key override (2 keys) |
| Warranty | Limited lifetime warranty |
| Compliance | UL 294, ANSI 156.2 |
Frequently Asked Questions - E-Plex 5x86 Dormakaba
How do I program user codes on the E-Plex 5x86?
To program user codes, enter programming mode by pressing [Prog] then the master code (default 123456). Select option [1] for user code addition, enter user ID (01-99) and a 4-8 digit code. Press [#] to save.
What is the default master code and how do I change it?
The default master code is 123456. To change it, enter programming mode, press [2] for master code change, enter current master code, then new master code (6-8 digits), followed by [#].
How do I reset the lock to factory settings?
To factory reset, remove the battery pack, insert a paperclip into the reset hole, press and hold for 5 seconds while re-inserting batteries. The lock will beep and reset to defaults.
What type of batteries does the lock use and how long do they last?
The lock uses 4 AA alkaline batteries. Battery life is up to 360,000 cycles (approx. 1-2 years typical usage). Low battery warning occurs 1,000 cycles before failure.
How do I install the E-Plex 5x86 lock?
Installation follows standard cylindrical lock preparation: install latch, strike, and outside assembly. Route wire harness through door hole. Connect harness to inside assembly and secure with screws. Test operation before closing door.
Can I use the lock for both left and right handing doors?
Yes, the lock is field reversible. You can switch handing by rotating the latch and adjusting the inside escutcheon without additional parts.
What is the audit trail and how do I access it?
The audit trail records the last 1,000 events (code entries, unlocks, lockouts). To access, enter programming mode, press [5] to view logs on the display (or via software if connected).
How do I override the lock if the battery dies?
The lock includes a mechanical key override. Insert the supplied key into the cylinder below the keypad and turn to unlock. Replace batteries immediately after.
Is the lock weather-resistant for outdoor use?
The E-Plex 5x86 is rated for interior use only. For exterior applications, use a weather shield or consider a weatherproof model.
How do I clean and maintain the lock?
Clean the exterior with a soft, damp cloth. Avoid abrasive cleaners, ammonia, or alcohol. Periodically check for loose screws and clean the keypad with mild soap if needed.
User questions about E-Plex 5x86 Dormakaba
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lock in PDF format for free! Find your manual E-Plex 5x86 - Dormakaba and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. E-Plex 5x86 by Dormakaba.
USER MANUAL E-Plex 5x86 Dormakaba
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Dormakaba
Model : E-Plex 5x86
Category : Lock